Announcement

**neeraj.juneja** · 03-26-2011, 01:30 PM

Originally posted by luvurbike View Post

Bulb type in ZMR is H4. Most of the cars have this bulb only... I found this video quite useful for first insight into fitting HIDs... However few questions still remain like where to put ballast and need to open fairing...

YouTube - How to Install HIDs [Conversion Kit] DIY

The girl is hot anyways..

**Adrenaline X** · 03-26-2011, 05:04 PM

Originally posted by Shreeni0403 View Post

Answers in Bold. Let me know if you need more info.

The Ballast on LHS
[IMG]http://lh4.ggpht.com/_uQQofVxNkOI/TGF47rCc9yI/AAAAAAAABko/4JYEVwgjxzU/s1200/left.jpg

wow thanks a LOT for the picture mate...solved half my queries...
just two more questions

1] Can u search the net and show me what kind of bulb with the spring action thing looks like?? i have mostly heard of twist to lock bulbs.

2] Was any wire altered/cut/added that connects to the battery? if u saw the video luvurbike posted...the girl showed that the ballast wire fit directly to the stock pin of the car...

is it that simple?

**Shreeni0403** · 03-26-2011, 10:02 PM

@ Adrenaline X

1] Can u search the net and show me what kind of bulb with the spring action thing looks like?? i have mostly heard of twist to lock bulbs.

Its something similar to the below image. But you will have single lock. instead of 2 in the image. (See right side locks.)

2] Was any wire altered/cut/added that connects to the battery? if u saw the video luvurbike posted...the girl showed that the ballast wire fit directly to the stock pin of the car...

is it that simple?
Sorry videos are blocked can't check. But there is no need to cut / trim any original wires.
Here is the wiring harness that you get.

**Adrenaline X** · 03-26-2011, 11:16 PM

Originally posted by Shreeni0403 View Post

1] Can u search the net and show me what kind of bulb with the spring action thing looks like?? i have mostly heard of twist to lock bulbs.

Its something similar to the below image. But you will have single lock. instead of 2 in the image. (See right side locks.)
[IMG]http://w6rec.com/duane/bmw/headlight/19.jpg

2] Was any wire altered/cut/added that connects to the battery? if u saw the video luvurbike posted...the girl showed that the ballast wire fit directly to the stock pin of the car...

is it that simple?
Sorry videos are blocked can't check. But there is no need to cut / trim any original wires.
Here is the wiring harness that you get.
[IMG]https://lh5.googleusercontent.com/_hC6HO8b2VhY/TY4EvZj9F7I/AAAAAAAABFQ/ZImbCxxydtM/1887132.jpg

the lock thing will hold the HID bulb perfectly?? like tight enough that it wont cause any future problems??

i have a few questions but i din know how to ask so i posted ur pic way with pointers! sorry!

ImageShack - Best place for all of your image hosting and image sharing needs

http://img405.imageshack.us/i/1887132.jpg

Unlimited space to host images, easy to use image uploader, albums, photo hosting, sharing, dynamic image resizing on web and mobile.

**luvurbike** · 03-26-2011, 11:55 PM

A couple of questions in addition to above....
1) Nothing connected to negative of battery??
2) While fitting the bulb, will reflector remain in it's position and bulb will be fitted from backwards of the reflector?

@Adrenaline X: Are thinking of DIY..??? Coz I am..

**Mzee_Maverik** · 03-27-2011, 12:00 AM

Originally posted by luvurbike View Post

One more question.... Nothing connected to negative of battery??

@Adrenaline X: Are thinking of DIY..??? Coz I am..

bro the black wire(to body ground) is the battery -ve wire. the negative of the battery is connected to the frame of the bike(or car) and +ve flows through the wires.

**Mzee_Maverik** · 03-27-2011, 12:04 AM

Originally posted by luvurbike View Post

A couple of questions in addition to above....
1) Nothing connected to negative of battery??
2) While fitting the bulb, will reflector remain in it's position and bulb will be fitted from backwards of the reflector?

@Adrenaline X: Are thinking of DIY..??? Coz I am..

yes the bulb fitted from backwards of the reflector.

**cha0s** · 03-27-2011, 12:27 AM

A quick question for the guyz from the suburbs of Mumbai...

Which SVC do u guyz prefer....

I have to give my ZMR for servicing next week..

I have got bad reviews of a few SVC's

Please let me know which ones you guys prefer so i can give my bike there..

Thanx in advance

**BlackZMR** · 03-27-2011, 12:36 AM

Originally posted by Adrenaline X View Post

Hey guys..after searching a lot in pune markets...i have come across a HID kit which is cheap and has a warranty...the question here is...what is our bulb type?
H4 ? H7?

If its H4...then how does the HID bulb go in?? is it a perfect fit? cuz i have a honda dio and i had tested a HID and stuff in it before...but the bulb of the HId was different so the effin glued it to my assembly! (what ass wipes?!)

so how will they put the bulb it? just put it and turn it and *click* it ll be fixed?
or will there be complications??

where does the blaster fit??

the whole fairing will come out??

what needs to be opened and how is the wiring done??

pls answer the question in bold format! thanks guys!

one bike one family!!

Where is this in pUne and what is the cost?

**Adrenaline X** · 03-27-2011, 01:05 AM

Originally posted by luvurbike View Post

A couple of questions in addition to above....
1) Nothing connected to negative of battery??
2) While fitting the bulb, will reflector remain in it's position and bulb will be fitted from backwards of the reflector?

@Adrenaline X: Are thinking of DIY..??? Coz I am..

Yeah not a bad idea!!

Originally posted by Mzee_Maverik View Post

bro the black wire(to body ground) is the battery -ve wire. the negative of the battery is connected to the frame of the bike(or car) and +ve flows through the wires.

Ohhhh....M a commerce student! hahahah dunno the technical jargon !

Originally posted by BlackZMR View Post

Where is this in pUne and what is the cost?

Theres a car accessories dealer shop in Aundh in sanewadi...sells HID for 2500 bux and says 6 months warranty...dunno the quality dunno the fitting arrangements...if u wana buy then let me know...i ll get one more friend then maybe we cant get it cheaper!

**veryhiphop** · 03-27-2011, 09:16 AM

Originally posted by anmol_1990 View Post

9ah MF battery is available from amaraon.

BTW are you changing your battery? so early?

My Battery has started giving up....horns are not working properly in day too...checked with SVC..they said to re-charge it...they also said the cost of MF battery machines (for maintenance) cost them approx. 2 Lacs

**Shreeni0403** · 03-27-2011, 12:01 PM

Originally posted by Adrenaline X View Post

the lock thing will hold the HID bulb perfectly?? like tight enough that it wont cause any future problems??

i have a few questions but i din know how to ask so i posted ur pic way with pointers! sorry!

Question 1 - You need to connect it to the frame of body. That will give negative supply to the ballast.

Quesion 2 - Yes its a direct fit to stock bulb adapter.

Question 3 - Remove the side cover where the battery is fixed. Its easily accessible.

Originally posted by luvurbike View Post

A couple of questions in addition to above....
1) Nothing connected to negative of battery??
2) While fitting the bulb, will reflector remain in it's position and bulb will be fitted from backwards of the reflector?

@Adrenaline X: Are thinking of DIY..??? Coz I am..

Yes the reflector will remain in its position, it wont fall off

Go ahead bro, its just 10 mins job. You can do it yourself.
Rest, You have your answers below

Originally posted by Mzee_Maverik View Post

bro the black wire(to body ground) is the battery -ve wire. the negative of the battery is connected to the frame of the bike(or car) and +ve flows through the wires.

Originally posted by Mzee_Maverik View Post

yes the bulb fitted from backwards of the reflector.

**Adrenaline X** · 03-27-2011, 02:10 PM

Originally posted by Shreeni0403 View Post

Question 1 - You need to connect it to the frame of body. That will give negative supply to the ballast.

Quesion 2 - Yes its a direct fit to stock bulb adapter.

Question 3 - Remove the side cover where the battery is fixed. Its easily accessible.

Yes the reflector will remain in its position, it wont fall off

Go ahead bro, its just 10 mins job. You can do it yourself.
Rest, You have your answers below

i just opened my Honda Dio and saw the HID kit fixings...i see the other wire stuck to the battery...not to the ground or anything...i am in dilemma ! pls help!! where does that wire go?

**Mzee_Maverik** · 03-27-2011, 02:26 PM

Originally posted by Mzee_Maverik View Post

yes the bulb fitted from backwards of the reflector.

Originally posted by Adrenaline X View Post

i just opened my Honda Dio and saw the HID kit fixings...i see the other wire stuck to the battery...not to the ground or anything...i am in dilemma ! pls help!! where does that wire go?

bro its the same thing connecting black wire to ground or -ve terminal. ground is indirectly connected to the -ve terminal of battery.
u just do one thing connect that black (ground wire) to the -ve terminal if the battery if u have confusion forget about connecting to the ground.

**Above_All** · 03-27-2011, 03:06 PM

Hi to All Karizma ZMR owners . I have recently purchased a White ZMR from Jalgaon (Maharashtra) . Add me in the list . Will post about why i go for ZMR , what others option i have instead of her , A Story about it , Problems i facing in it . IF SOMEONE IS INTERESTED .

Announcement

Hero Honda Karizma ZMR

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment