Announcement
Collapse
No announcement yet.
Apache RTR/FI
Collapse
X
-
Any specific reasons??Originally posted by Technocrat View PostYes I would be selling the RTR sometime next month, will check with agents first as they are better in terms of timely payment & getting paper work done properly.
Or just buying a new higher capacity bike.......
The Magician"
Comment
-
AAAHhhhhhhhhhhhhhhhhhhhhhhhh
Messed up with the swingarm real good, was setting the slack of chain and while tightening the bolt the cloth between the spanner and the swingarm slippled a little, making the spanner peeling little paint off the swingarm.Last edited by rennycornelius; 05-21-2010, 04:56 PM.The Magician"
Comment
-
Battery's Negative wire's clip broken
About an hour ago i thought to check the level of water in the battery, after topping it up with the injection voils, i saw some deposit at the negative wire, so i cleaned it with a sandpaper, while cleaning the clip felt little loose, as it's made up of copper, when i opened the taping below it, it came off.
Now without it i cannot bolt the wire to the battery so what i did, i used the clip to hold the wire (it still had it's copper wires out of the insulation), i bolted the clip while puching those wire behind it.
this is a make shift option, now tomorrow i'll be going to get a new clip.The Magician"
Comment
-
Originally posted by rennycornelius View PostMessed up with the swingarm real good, was setting the slack of chain and while tightening the bolt the cloth between the spanner and the swingarm slippled a little, making the spanner peeling little paint off the swingarm.Originally posted by rennycornelius View PostAbout an hour ago i thought to check the level of water in the battery, after topping it up with the injection voils, i saw some deposit at the negative wire, so i cleaned it with a sandpaper, while cleaning the clip felt little loose, as it's made up of copper, when i opened the taping below it, it came off.
Now without it i cannot bolt the wire to the battery so what i did, i used the clip to hold the wire (it still had it's copper wires out of the insulation), i bolted the clip while puching those wire behind it.
this is a make shift option, now tomorrow i'll be going to get a new clip.
Rennyy........dont touch the bike today......seems like a bad day for u both
07 HH Zma
11 Honda Aviator DLX
14 Ford Figo 1.4 TDCI (Now Caged:( )
16 Scooty Zest
11 CBR 250R
Comment
-
vibrations
guys i own an apache rtr 160, 2007 model. Recently met with a minor accident. replaced faring part and fork bent rectified and underwent a complete service. But now, while riding, when the speedometer touches 50 kmph the bike starts to vibrate vigorously. It irritates me a lot. whats wrong
!!! why its vibrating.
Comment
-
Originally posted by onlinesatish View PostThis what exactly i wanted to do few day back when i changed the no plate. Could'nt do it as i was unable to remove 2 screws....thougnt i'd do it later!
My front number plate came of itself. The brass inserts in the fairing holes gave way and sliped out. I got the small number plate done on front mudguard from the radium artist for Rs.30/-.There's lot to it other than saddle....
sigpic
Comment
-
Wonder how it looks!Originally posted by nox2505 View PostMy front number plate came of itself. The brass inserts in the fairing holes gave way and sliped out. I got the small number plate done on front mudguard from the radium artist for Rs.30/-.
@renny...
Got the 180 mudgaurd. have'nt fitted it nor have i seen it. My bike is still at the SVC. A bracket is missing itseems to fit the mudgaurd......wonder how long does it take.
And i also got the 180 logo cover and installed it too.....hope i get the bike bake today evening!07 HH Zma
11 Honda Aviator DLX
14 Ford Figo 1.4 TDCI (Now Caged:( )
16 Scooty Zest
11 CBR 250R
Comment
-
evem same to same happend wid me few days back but insted of making small sticker on front mud guard i made BIG Sticker on Front black panel Looks Superb..Originally posted by nox2505 View PostMy front number plate came of itself. The brass inserts in the fairing holes gave way and sliped out. I got the small number plate done on front mudguard from the radium artist for Rs.30/-.
IMAGE
Last edited by abhiwar; 05-22-2010, 08:38 PM.Its not enough to know how to twist the throttle; you must have judgement to know when and where to do it.
Comment
-
Pics!!!!!!!!!!!!!!!!!!!Originally posted by onlinesatish View Post
@renny...
Got the 180 mudgaurd. have'nt fitted it nor have i seen it. My bike is still at the SVC. A bracket is missing itseems to fit the mudgaurd......wonder how long does it take.
And i also got the 180 logo cover and installed it too.....hope i get the bike bake today evening!
Make sure he bolted all the needed nuts at the mudguard ha.
But it's too big.Originally posted by abhiwar View Post
The Magician"
Comment
-
a re this looks too big coz there is no (black)Fonts to cover that big white patch(as i edited pic)Originally posted by rennycornelius View PostPics!!!!!!!!!!!!!!!!!!!
Make sure he bolted all the needed nuts at the mudguard ha.
But it's too big.
but it looks like some dirt bike ka NO. sticker heheheh....!
Its not enough to know how to twist the throttle; you must have judgement to know when and where to do it.
Comment
-
okOriginally posted by abhiwar View Posta re this looks too big coz there is no (black)Fonts to cover that big white patch(as i edited pic)
but it looks like some dirt bike ka NO. sticker heheheh....!
I was with the idea of putting a sticker on the mudguard for the number, but the sticker job the Fi sports is too good, it would have ruined it.
I'am running no num plate front now.
it looks clean and good.
The Magician"
Comment


...

Comment