Announcement

**kriss** · 02-17-2009, 09:35 PM

nitrogen ??

Yes we do.. Hydbiker has nitrogen gas filled up in his second bike, tvs victor.

**EL LOCO DIABLO** · 02-17-2009, 09:40 PM

^^Where?? meaning at which shop was he able to fill N2.......MRF, BRIDGESTONE?? When i asked the MRF Tyredrome they have here the guys told me they don't have the smaller nozzle that is usually used for bikes

**threat2myself1** · 02-17-2009, 10:25 PM

i got my tyres filled with nitrogen today...
the bike feels better when riding on rugged roads....!!
less jerking when going over small gutters!!
overall its worth it!!

**Insidious** · 02-18-2009, 06:07 PM

Originally posted by threat2myself1 View Post

i got my tyres filled with nitrogen today...
the bike feels better when riding on rugged roads....!!
less jerking when going over small gutters!!
overall its worth it!!

How much did it set you back by?

**threat2myself1** · 02-18-2009, 06:09 PM

Originally posted by Insidious View Post

How much did it set you back by?

50/- for each tyre!!

CJ · 02-19-2009, 11:01 AM

Just saw a Mobile Charging thing for 120/-rs what say guys ?? is it worth having it ??

**Aparajith** · 02-19-2009, 11:04 AM

Originally posted by threat2myself1 View Post

50/- for each tyre!!

A bit too much. I fill at 30/- per tire for my car and 20/- per tire for my bike.

**rohitmundra** · 02-20-2009, 12:47 AM

have completed 20000kms....going for a service tomorrow.
Help me out with few points:
1)I have not change chain lock and link set since starting? What is it and do i need to change it
2)what is clutch cover gasket? Do I need to change the same?
3) cylinder head gasket?

**HydBiker** · 02-20-2009, 11:03 AM

Originally posted by threat2myself1 View Post

50/- for each tyre!!

in hyd they are charging Rs 30 (two tyres) for a bike and Rs 200 for a car (5 tyres).

**threat2myself1** · 02-20-2009, 11:59 AM

Originally posted by HydBiker View Post

in hyd they are charging Rs 30 (two tyres) for a bike and Rs 200 for a car (5 tyres).

hmmm...i think the high price is because no one actually uses it here...very few places where they fill it.....

**harshit.d** · 02-20-2009, 02:15 PM

Originally posted by CJ View Post

Well i have taken my beast till 98 till now...did not experience any vibrations...i suppose pulsar gives vibes in higher speeds...above 110-120 ?

Update : Just took to 110 ...no probs boss

Have taken my P200 till 120 and still no problem

So far completed 6100km and into the 5th month of ownership!

Gear shifting at times is rough and the rest of times its smooth like anything. I'm simply loving my bike experience coz its my first bike

**harshit.d** · 02-20-2009, 02:19 PM

Originally posted by EL LOCO DIABLO View Post

^^Yeah that's normal, nothing to worry about you probably might to get used to it after a while, and vibes will have the worst effect on your hands if you grip the bars tight (you feel as though your hand is vibrating eventhough you're not on the bike!), i would suggest you get a pair of gloves as they might dampen the vibes a bit

EDIT: furioussphinx a member here has HID on his P200, you can ask him about it's performance, i think you might have to beef up your electrical cables to withstand increase in power and upgrade to a bigger battery, probably have to change the electricals to a full-on DC instead of the AC/DC we have default. And you can't go for a HID for the hi-beam as it's not approved by the Govt. so you would have to settle for a hybrid setup (normal for hi-beam and HID for lo), and HID-beams can get nasty hot, so you have to take care not to burn your reflectors out too. IMO i think it is better to go for a normal halogen lamp, rather than going through all this fuss of HID'ing your lamps, because if the mods aren't properly done it could end up screwing your whole electrical system, and you can't afford that esp. when P200's don't have a alternative way to start (other than jump-starting)

How much would the change over to full DC electricals cost?
I believe then this will a constant light beam irrespective of the speed at which driven or even when the bike is kept at idle.

**EL LOCO DIABLO** · 02-20-2009, 10:32 PM

Originally posted by Aparajith View Post

A bit too much. I fill at 30/- per tire for my car and 20/- per tire for my bike.

Where exactly did you fill N2 for your bikes and cars? I tried around town and gave up

Originally posted by harshit.d View Post

How much would the change over to full DC electricals cost?
I believe then this will a constant light beam irrespective of the speed at which driven or even when the bike is kept at idle.

I approximate the change in output to cost you around a grand but as i said earlier it is approximation, you need to ask someone here who had actually carried out this mod

**Insidious** · 02-20-2009, 10:45 PM

I have one outlet that fills nitrogen somewhere near my place. I don't know how much they charge, but it's a pretty big showroom, so chances are, it'll be pretty hefty. Apar saar, where DO you fill it for 20 and 30?

@ELD: Guess what? My silencer has a hole in it now. And I'm not talking about the one in the end can to let fumes out. Another one. At the starting of the pipe. Bajaj silencers kick ass man! *heavy sarcasm*

@All: General info - it seems silencers aren't entitled warranty if they have scratches on them. Anyone know anything about this?

**EL LOCO DIABLO** · 02-20-2009, 11:00 PM

Well i got to know about the Silencer during the second spill i had on my bike, and i've decided to keep it cool about the tyres till the Ninja (Fr: 110/70 17" Rr:130/70 17") or the CBF150 comes out as both these bikes seem to have the same profile tyres as 200's and the best part is that the 120/80 for the CBR is specially made by MRF for Honda (Or atleast that's what was said in this months BI), so it would only be wiser to wait for these tyres to come out

Announcement

Pulsar 200 DTS-i

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment