Announcement

**jd666** · 07-16-2011, 12:58 AM

Thanks guys.. Yes Vijay.. the last piece i got my hands on!!! Though i am searching for a stock RXZ 4 speed exhaust!!!

Right now just bought a Sirac for the rear tyre.. a M62 comes soon for the front... Waiting to ride the bike freely next weekend... Running in is complete!!

**bhpistorqintorpm** · 07-17-2011, 09:24 PM

super cool, neat and clean rebuild Jaideep!! many congratulations

please post proper full bike pics

.. how did the ride go?

**jd666** · 07-18-2011, 08:46 AM

^^ Will do soon. Ride this coming weekend!

**dual disc 200** · 07-18-2011, 10:49 AM

Originally posted by BigBore View Post

Use any ordinary 2T oil for the run-in! Motul 800 2T only after the run-in period

Thanks Arun. Will POWER 1 JETTX do the job? Btw. is "Hel Performance" ur's??

**BigBore** · 07-18-2011, 12:57 PM

Originally posted by dual disc 200 View Post

Thanks Arun. Will POWER 1 JETTX do the job? Btw. is "Hel Performance" ur's??

You are most welcome Ram. Castrol Power1 JETTX will do but i would recommend Castrol Active 2T oil or Motul Motomix 2T for the run-in. I have used both with good results on all my engine rebuilds till date

I have recently rebuilt my shogun engine and using Motul Motomix 2T. Its giving awesome results!!

"Hel Performance" is one of my friends

**dual disc 200** · 07-18-2011, 01:02 PM

Originally posted by BigBore View Post

You are most welcome Ram. Castrol Power1 JETTX will do but i would recommend Castrol Active 2T oil or Motul Motomix 2T for the run-in. I have used both with good results on all my engine rebuilds till date

I have recently rebuilt my shogun engine and using Motul Motomix 2T. Its giving awesome results!!

"Hel Performance" is one of my friends

Thanks Arun. Motomix is usually difficult to source it here. However Motul 510 is available off the shelf. Any idea about that Arun?? I'm running on Autolube to clear the cloud further.

**SriramEfunds** · 07-18-2011, 05:44 PM

Originally posted by dual disc 200 View Post

Thanks Arun. Will POWER 1 JETTX do the job? Btw. is "Hel Performance" ur's??

Originally posted by BigBore View Post

You are most welcome Ram. Castrol Power1 JETTX will do but i would recommend Castrol Active 2T oil or Motul Motomix 2T for the run-in. I have used both with good results on all my engine rebuilds till date

I have recently rebuilt my shogun engine and using Motul Motomix 2T. Its giving awesome results!!

"Hel Performance" is one of my friends

Originally posted by dual disc 200 View Post

Thanks Arun. Motomix is usually difficult to source it here. However Motul 510 is available off the shelf. Any idea about that Arun?? I'm running on Autolube to clear the cloud further.

Ram the reason why Arun suggesting you use Active 2T or Motul Motomix is that both of them are mineral based. The other ones you mentioned above are not. What happens during the running(If it is a new bore/rebored), the lines would need to break in evenly. If SS or FS oil used, the chances of making bore glazed and hence result in poor performance.

In any two wheeler if you notice, it is always recommended to use Mineral Oil for the run in period. Also the chemical composition in the mineral is comparatively breaks down lesser than other oils. Also I recommend Mineral oil for your gear box. Run atleast 4000kms to settle before switching over to SS or FS.

Happy and safe riding!

**dual disc 200** · 07-18-2011, 05:50 PM

Originally posted by SriramEfunds View Post

Ram the reason why Arun suggesting you use Active 2T or Motul Motomix is that both of them are mineral based. The other ones you mentioned above are not. What happens during the running(If it is a new bore/rebored), the lines would need to break in evenly. If SS or FS oil used, the chances of making bore glazed and hence result in poor performance.

In any two wheeler if you notice, it is always recommended to use Mineral Oil for the run in period. Also the chemical composition in the mineral is comparatively breaks down lesser than other oils. Also I recommend Mineral oil for your gear box. Run atleast 4000kms to settle before switching over to SS or FS.

Happy and safe riding!

Thanks Sriram

Will try hunting down Motomix or will go with Active 2T. Btw. Motomix or Active 2T is suitable for Oil injected engines right? This is because, I'm not running on pre-mix and definitely don't know why there are two kinds of oils that say only for premix & the other says for oil injected engines only.

**SriramEfunds** · 07-18-2011, 05:54 PM

Originally posted by dual disc 200 View Post

Thanks Sriram

Will try hunting down Motomix or will go with Active 2T. Btw. Motomix or Active 2T is suitable for Oil injected engines right? This is because, I'm not running on pre-mix and definitely don't know why there are two kinds of oils that say only for premix & the other says for oil injected engines only.

Those two are for both oil pump/pre-mix. I would suggest you to go for pre-mix during the run-in period to be on the safe side. Mix 30ml/Litre and ride below 50kmph. Avoid rush of blood during the ride (I know which is very difficult)

.

EDIT:- Deepak said might visit Chennai, let me know if you need any.

**dual disc 200** · 07-18-2011, 05:57 PM

Originally posted by SriramEfunds View Post

Those two are for both oil pump/pre-mix. I would suggest you to go for pre-mix during the run-in period to be on the safe side. Mix 30ml/Litre and ride below 50kmph. Avoid rush of blood during the ride (I know which is very difficult)

.

Thanks Sriram. Trust me, I haven't even rev'ed her hard. Taking it real slow as my tolerances are quite tight. In simple words, never have crossed 40 kmph mark & determined to do that till 2-2.5k kms and open her out quite gradually in the fellow 1k kms after that.

About Deepak's Visit, thanks for reminding Sriram, if you could pls. hand-over two can's of Motomix, that would be great.

**BigBore** · 07-18-2011, 07:17 PM

Originally posted by dual disc 200 View Post

Thanks Arun. Motomix is usually difficult to source it here. However Motul 510 is available off the shelf. Any idea about that Arun?? I'm running on Autolube to clear the cloud further.

I feel Sriram has cleared all your doubts about using the mineral 2T oil for the run-in. Don't use MOTUL 510 2T as its semi-synthetic. I would recommend you to use the oil pump if its in good condition.

Glad Sriram is helping you source the Motomix!

Cheers!!

**BigBore** · 07-18-2011, 07:20 PM

Originally posted by dual disc 200 View Post

Thanks Sriram. Trust me, I haven't even rev'ed her hard. Taking it real slow as my tolerances are quite tight. In simple words, never have crossed 40 kmph mark & determined to do that till 2-2.5k kms and open her out quite gradually in the fellow 1k kms after that.

About Deepak's Visit, thanks for reminding Sriram, if you could pls. hand-over two can's of Motomix, that would be great.

You will require to buy 4 can's of MotoMix as it comes in only 500ml can's. 2 Ltrs will be adequate for the complete run-in.

**SriramEfunds** · 07-18-2011, 07:39 PM

Originally posted by dual disc 200 View Post

Thanks Sriram. Trust me, I haven't even rev'ed her hard. Taking it real slow as my tolerances are quite tight. In simple words, never have crossed 40 kmph mark & determined to do that till 2-2.5k kms and open her out quite gradually in the fellow 1k kms after that.

About Deepak's Visit, thanks for reminding Sriram, if you could pls. hand-over two can's of Motomix, that would be great.

Try calling the Chennai Area Manager to know the CBE distributor to get Motomix. If not, let me know shall get and send it through Deepak if his plans are confirmed.

Originally posted by BigBore View Post

I feel Sriram has cleared all your doubts about using the mineral 2T oil for the run-in. Don't use MOTUL 510 2T as its semi-synthetic. I would recommend you to use the oil pump if its in good condition.

Glad Sriram is helping you source the Motomix!

Cheers!!

Arun, I just shared what I gained from this forum and seniors like you!

**dual disc 200** · 07-19-2011, 11:02 AM

Originally posted by BigBore View Post

I feel Sriram has cleared all your doubts about using the mineral 2T oil for the run-in. Don't use MOTUL 510 2T as its semi-synthetic. I would recommend you to use the oil pump if its in good condition.

Glad Sriram is helping you source the Motomix!

Cheers!!

Originally posted by BigBore View Post

You will require to buy 4 can's of MotoMix as it comes in only 500ml can's. 2 Ltrs will be adequate for the complete run-in.

Thanks Arun, my bad I thought Motomix comes in 1 ltr cans.

Originally posted by SriramEfunds View Post

Try calling the Chennai Area Manager to know the CBE distributor to get Motomix. If not, let me know shall get and send it through Deepak if his plans are confirmed.
Arun, I just shared what I gained from this forum and seniors like you!

Called up Louis couple of days back & he confirmed that stocks for now in Cbe are none and will be available in near future soon, anyways, he also told that he shall confirm it once again sriram. If he let's go off, then i need your humble help for the oil.

P.S. Loved the Highlighted part, can't find it more anywhere other than the 2 stroker forum.

**jd666** · 07-19-2011, 12:06 PM

Yup i can vouch from experience. The bike ran on normal mineral 2T oil for the first 800 500-800kms or so, and now its on Motul 2T. Works very well.

Announcement

RXZ 5 speed on the road finally

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment