Spare parts thread 2 strokes Yamaha RX family

[karthikdattag]

no the sticker ...on tank and side shield..monogram too but wanted to know the availability of the stickers first
thanks

Which colour Tank & Shield do you have? Its RXG right?

[rxfan]

Which colour Tank & Shield do you have? Its RXG right?

Yes RXG ! its a black colour tank

[MAK6194]

Brand new RX100 frame is available for sale. PM for details.

Hello Sriram, I'm a rookie and looking out for a RX 135 (5S) Frame as my bike has gone out of shape since last time my Bro met with an accident

Cheers !!
-MAK

[SriramEfunds]

Hello Sriram, I'm a rookie and looking out for a RX 135 (5S) Frame as my bike has gone out of shape since last time my Bro met with an accident

Cheers !!
-MAK

How is your brother doing? That frame is gone. Frames are hard to come by. Will post if there is any available. Last known price is 4800/- incl. taxes.

[asif]

Hello Sriram, I'm a rookie and looking out for a RX 135 (5S) Frame as my bike has gone out of shape since last time my Bro met with an accident

Cheers !!
-MAK

Surely this would help i guess.

http://classifieds.team-bhp.com/buy-used-for-sale/20311/Navi%20Mumbai/Yamaha-Rx-100-135-Chassis.html/

[MAK6194]

How is your brother doing? That frame is gone. Frames are hard to come by. Will post if there is any available. Last known price is 4800/- incl. taxes.

Thank you for asking Sriram, he is doing great now. He has recovered completely after this mishap but luckily all he encountered was bruises. This hapnd 2 to 3 months back, so he is very well now.

BTW, I have no issues with the pricing of the Chassis coz in such a situation, sourcing parts is a big NO and if readily available, not more than sheer Luck :-)

Thank you for the Link Asif. Will check through and update at the earliest.

Till then Cheers !!
-MAK

[MAK6194]

Surely this would help i guess.
http://classifieds.team-bhp.com/buy-...-Chassis.html/

My apologies for another post, but just to clarify:

Are the Rx - 100 & 135 Frames the same or could be put to use?? Because the frame/chassis I need is for a 5 speed & so wanted to make sure if it works

Thanks Again !!

-MAK

[2strokey]

rx-135 & rx-100 Chassis are different.

My apologies for another post, but just to clarify:

Are the Rx - 100 & 135 Frames the same or could be put to use?? Because the frame/chassis I need is for a 5 speed & so wanted to make sure if it works

Thanks Again !!

-MAK

Yes Chassis for Rx-100 & Rx-135 are different & Rx-135 5 speed are different.

But the differences are really minor & one can easily not be bothered with that if the Availability of the 5 speed chassis is not there. which I believe is the crisis all over India.

The main difference are:
1) The Fitment for the Power Box (The Pipe going up from the Carb towards fuel tank & A Plastic Induction Box fitted at the End) This Fitment is not there for RX-100. But its there for Rx-135, RXZ & RX-135 5 speed & RXZ 135-5speed.
2) Fitment Position for CDI & Coils are different for RX-100 & RX-135.
3) Minor Change of the Frame near the Bottom just below the Air Filter.
4) Minor Change for the Main Stand fitment.

But all these point can easily be ignored or can be Hand made onto a RX-100 Chassis. I hope I have been helpful.

[SriramEfunds]

Yes Chassis for Rx-100 & Rx-135 are different & Rx-135 5 speed are different.

But the differences are really minor & one can easily not be bothered with that if the Availability of the 5 speed chassis is not there. which I believe is the crisis all over India.

The main difference are:
1) The Fitment for the Power Box (The Pipe going up from the Carb towards fuel tank & A Plastic Induction Box fitted at the End) This Fitment is not there for RX-100. But its there for Rx-135, RXZ & RX-135 5 speed & RXZ 135-5speed.
2) Fitment Position for CDI & Coils are different for RX-100 & RX-135.
3) Minor Change of the Frame near the Bottom just below the Air Filter.
4) Minor Change for the Main Stand fitment.

But all these point can easily be ignored or can be Hand made onto a RX-100 Chassis. I hope I have been helpful.

I don't know for how long, you don't get exclusive RX135 chassis any more. The part that comes from factory though share the same number across the RX series, however, it never comes with weld for powerbox at least for couple years that I've seen.

[MAK6194]

Yes Chassis for Rx-100 & Rx-135 are different & Rx-135 5 speed are different.

But the differences are really minor & one can easily not be bothered with that if the Availability of the 5 speed chassis is not there. which I believe is the crisis all over India.

The main difference are:
1) The Fitment for the Power Box (The Pipe going up from the Carb towards fuel tank & A Plastic Induction Box fitted at the End) This Fitment is not there for RX-100. But its there for Rx-135, RXZ & RX-135 5 speed & RXZ 135-5speed.
2) Fitment Position for CDI & Coils are different for RX-100 & RX-135.
3) Minor Change of the Frame near the Bottom just below the Air Filter.
4) Minor Change for the Main Stand fitment.

But all these point can easily be ignored or can be Hand made onto a RX-100 Chassis. I hope I have been helpful.

Well this surely helps Coz I wish to restore it back to Stock and was a bit apprehensive on the Frame (100 to 135). But I guess at this time when OE parts are going out of stock everywhere, I would have to settle down for the RX 100 Frame (Time - being) and so that before all the other parts are mounted onto this frame, we don't miss out on these little touch ups LOLz....

However, I have another thing to Clarify : I know it either has to be BPR7HGP (G-Power) Or a BPR7HIX (Iridium IX) for RX 135 BUT unsure where is the best means to source these (I'm from Hyderabad)

I may not be using the right words here but I really am thankful to U guys for being so helpful ...

Cheers !!

-MAK

[MAK6194]

Would try some other sources too before giving up but having said that, I would anyways go for the RX 100 Frame for now hehehehehehe....

thank you So much Sriram :-)

[karthikdattag]

RX-Z Speedo + Tacho Combo for Sale

RX135 / RXG / RX-Z Speedometer assembly with 4-Gear Marking & RX-Z Tachometer for immediate sale. Interested may send their enquires to [email protected] or [email protected]. Please feel free to send a PM if required.

Pics attached for reference.

[Gyroerror]

Looking for a VM26 for a project, anyone got leads? I need this in a hurry!

[Ri$hi]

Here are the metal Key set which we have in stock. It consists of the ignition, fuel tank and side locks with 2 metal keys in OE packing. Interested may get in touch with me via my email: [email protected]

Do we also have the helmet lock which fits on the frame with this as well?

[rxfan]

hi

i was wondering if the locks which fix the "RX 100/135 monogram" to the the side panels available. Also fixes the silver part to the side panel

thanks