Spare parts thread 2 strokes Yamaha RX family

[SriramEfunds]

i was wondering if the locks which fix the "RX 100/135 monogram" to the the side panels available. Also fixes the silver part to the side panel

thanks

If I'm correct, they are square in shape when compared to RX100/135 monogram lock chips.

[rxfan]

If I'm correct, they are square in shape when compared to RX100/135 monogram lock chips.

hi Sirram

i have no clue because ive never seen any .. my mechanic melted the monogram from the back side and fixed the monogram to the side panel..but its not a neat job ..but i think u r right its a sqaure thingi ..

[Ri$hi]

i was wondering if the locks which fix the "RX 100/135 monogram" to the the side panels available. Also fixes the silver part to the side panel

thanks

Yes they are available with authorised dealers. The one which holds the monogram on the side panels are round and the one which holds the silver part are rectangle in shape.

[rxfan]

Yes they are available with authorised dealers. The one which holds the monogram on the side panels are round and the one which holds the silver part are rectangle in shape.

great yamaha chandigarh does not keep any RX related parts '
so if anyone has an extra set of these locks pls PM me

[nitinenzo]

hi JD,
I wanted an rxz 4speed silencer.The original 4 speed rxz silencer ,not the cat one.

[yamdoot]

Looking for a VM26 for a project, anyone got leads? I need this in a hurry!

U can get a perfect Mikuni replica VM26 for less than2.5k . .

[SriramEfunds]

great yamaha chandigarh does not keep any RX related parts '
so if anyone has an extra set of these locks pls PM me

PM me your address, will send it across.

[sohaibak]

I am really looking for this Kit. I have a 1998 yamaha rx 135 4-speed... i am looking forward to convert it to 5 -Speed. please do let me know about how much it will cost me and i am really looking forward to buy it. my mail id is [email protected].
thank you.

[The Pain]

5 Speed conversion

I am really looking for this Kit. I have a 1998 yamaha rx 135 4-speed... i am looking forward to convert it to 5 -Speed. please do let me know about how much it will cost me and i am really looking forward to buy it. my mail id is [email protected].
thank you.

Hi Shoaib,

If you are planning to convert your 4 speed RX-135 to a 5 speeder, its a very costly affair these days. You will need the following parts for a proper conversion:

- 5 Speed Bore Kit (Cylinder, Piston, Rings etc.)
- 5 Speed Head
- 5 Speed Gearbox (entire or conversion kit depending on the state of your current GB)
- 5 Speed Carb (You can also use your current carb. Experts on the forums suggest the 4 speed carb may be better)
- 5 Speed Sproket kit

Also the finer points if your into getting the looks right as well

- 5 Speed engine casings
- Repaint of tank and panels with 5 speed decals.

All in all, with current rates of spares you are looking at an expenditure of close to 15-20K upwards excluding labour and other small stuff like gaskets etc. (This also depends a great deal on where and whom you source the parts from)

[sohaibak]

Hi Shoaib,

If you are planning to convert your 4 speed RX-135 to a 5 speeder, its a very costly affair these days. You will need the following parts for a proper conversion:

- 5 Speed Bore Kit (Cylinder, Piston, Rings etc.)
- 5 Speed Head
- 5 Speed Gearbox (entire or conversion kit depending on the state of your current GB)
- 5 Speed Carb (You can also use your current carb. Experts on the forums suggest the 4 speed carb may be better)
- 5 Speed Sproket kit

Also the finer points if your into getting the looks right as well

- 5 Speed engine casings
- Repaint of tank and panels with 5 speed decals.

All in all, with current rates of spares you are looking at an expenditure of close to 15-20K upwards excluding labour and other small stuff like gaskets etc. (This also depends a great deal on where and whom you source the parts from)

Thanks for your reply.
I do have the following parts.
Standard size 5 speed bore kit ( cylinder,piston,ring)
5 speed cylinder head.
RXZ 5 speed carburettor. I think there is a difference in the carbs of 135 4 speed and RXZ. the carb on the Z is bigger. Even the jets. 135 jet size is 115 i guess and on the z its 135. correct me if i am wrong. and even while comparing the side by side the carb of the RXZ is slightly bigger.

Actually my bike was standing in my garage for 8 yrs. its condition has detoriated a lot bcoz i wasnt able to ride it. I have started the restoration process and the bike is complete and its all original and stock except the bore on 2nd size. I want to convert it to 5 speed so am searching for the parts required. i am really in need for the parts.

so according to your suggested parts i require the following

5 speed gear box.
5 speed engine casings.


can any one help me please as to where can i get these parts and yes can u please also let me know about the cost of these parts.

really appreciate your reply PAIN.
regards,
Sohaib

[yamdoot]

Thanks for your reply.

5 speed gear box.
5 speed engine casings.

can any one help me please as to where can i get these parts and yes can u please also let me know about the cost of these parts.

You can use your old RX casings if they are in good shape. A 5sp. gearbox should cost about 5-6k used. There are no new original gears available.

[sohaibak]

You can use your old RX casings if they are in good shape. A 5sp. gearbox should cost about 5-6k used. There are no new original gears available.

Does it mean that i do not have to change engine casings for converting my gear box to 5-speed? I had been under the impression that i will also have to change the casings also for the conversion. If it is possible that i can keep my stock casings and still covert the gear box to 5 -speed it would be really great. My bike will still look stock but would have an awesome surprise underneath.

Does it mean that i would only require the 5 speed gear box only? please let me know.

And thank you Yamdoot for sharing your knowledge.
Regards,
Sohaib.

[psycho 98]

Read pains post properlly he has detailled it well of what is required and whats not !!

[sohaibak]

Read pains post properlly he has detailled it well of what is required and whats not !!

I did read PAIN'S post and it was really helpfull. I am looking for a 5 -speed gearbox. Is there any one who call help me find it or any one who has it and is willing to sell it. I want complete new set.

[ABikerAtHeart]

looking for a rx135 mainstand. Price,anyone?