The Official Pune Offline Meet(G2G) Thread

[Eshan-P180]

Tyres change ... CARB change .... what next ... Damn ... You are on a mission !!!!!!


cheerz..
ride safe and wear helmets ...

abe puch mat...Panavati laga hai piche!!!

Btw Kal hi Suspension theek karke aya...

[Dheeraj Ksheersagar]

Does any one know a good MRF store in Pune??
I have already approached the one in CC area and aundh, they do not have the tire i want.

Darshan tires do not stock MRF tires..

I want the front tire for my bike and its a tubeless, the same one used for a Pulsar 220.

MRF Zapper 90/90-17 Tubeless, The cost is Rs 1750...

No i do not wish to go for Pirelli or any other brand apart from the mentioned above.

I replaced both my tyres @ MRF shwroom near pune IT park.... he has all varieties... i have a tubless MRF Zapper 90/90-17 front and MRF Zapper Vyde 120/90- 17 rear.. the cost is about right...

[MotionFreak]

Hi All,

I came across this video on you tude and this guy is talkin about some tweaks that he has made to this bike to improve the power output. Some "BAJAJ" unit he is referring to again and again .. I am sure that not Bajaj, but I am unable to understand that exact word. Could anyone have a look and explain what that thing could be.
I havent posted this on CBR forum as I might get irrelevant inputs. If you guys this that its better to move this query to there, I would do it.

2011 Honda CBR250R Review by MotorcycleDaily.com - YouTube

cheerzzz.. n thanks
ride safe and wear helmets ....

Bazzaz.net - Bazzaz

in comments.

[alex.joseph30]

Let me see if i can ask people from Mumbai to chip in for Telbaila and Mulshi backwaters...

With such a short notice..i dont think there will be many..but lets see..

How many from Pune yet ??

Guys im sorry i know im late, but like nin suggested can we do it on sat 7/04/12 evening if possible?

[utsavchs]

Does any one know a good MRF store in Pune??
I have already approached the one in CC area and aundh, they do not have the tire i want.

Darshan tires do not stock MRF tires..

I want the front tire for my bike and its a tubeless, the same one used for a Pulsar 220.

MRF Zapper 90/90-17 Tubeless, The cost is Rs 1750...

No i do not wish to go for Pirelli or any other brand apart from the mentioned above.

There is a MRF showroom on Nagar road beside Michelin tyres at Ramwadi. Check there, had my 220's tyres changed from there.

[abhinavcrytek]

guys i am planning to buy the CBR 250r but have been reading about the build quality issues with the bike ...are they still there ..in the new slot??

also which honda dealer in pune to choose..as in better in after sales , bike servicing..!

[antz.bin]

Any rides with 'sufficient participation' happening this weekend?

Itna sannata kyun hai bhai - Sholay - YouTube

[ROCKRZ]

Any rides with 'sufficient participation' happening this weekend?

Itna sannata kyun hai bhai - Sholay - YouTube

Saara jamana.... Hasino ka dewana.....

[antz.bin]

Saara jamana.... Hasino ka dewana.....

@Krishna Raghunath aka Bone_Chilled Professor Biker

We need you to do this:

Sara Zamana Haseeno Ka Deewana Vinod - YouTube

Especially the bit starting at (2:30)

[icemang]

Chain friction plate gone!

Hi guys,

I am writing from Rajkot. xBhp Ahmedabad was having its mega G2G today and I had planned to attend it.

I started at 0700h from home. It was cool and I made it to Darshan dhaba by 0800h when I heard a slight thud from underneath the bike and towards the left side. I stopped immediately and checked the bike thoroughly but nothing was amiss. Thinking that it must have been some small stone hitting the cowl, I started off again.

Now, I heard the chain slapping the swing arm, something which was totally new in my experience with the CBR. Again, I stopped immediately and checked the chain. To my horror, I found that the rubber friction plate had torn off and was stuck between the damper and the swing arm's right arm. I took it off and found that the swing arm itself had been abraded by the chain. That was the end of my trip to Ahmedabad for the G2G

Nursed the bike back to Rajkot and inspected it really properly. There was a fair amount of wear on two sections of the swing arm, though not so bad as to warrant a complete replacement.

The bike had just returned from a service and I am suspecting that the mechanic must have fingered this part while adjusting the chain (he had already reset the position of the gear lever without being asked to do so).

This is an odd problem, I wonder if any of us in the Pune chapter have had it.

Here are the pics:



The small lip ahead of the serrated portion is the actual plate surface, the serration has been caused by the chain abrading the rubber. Very, very strange..

[shashrash]

guys i am planning to buy the CBR 250r but have been reading about the build quality issues with the bike ...are they still there ..in the new slot??

also which honda dealer in pune to choose..as in better in after sales , bike servicing..!

Hi there ... I am not sure what issues are you concerned of as for me, the issue that I faced was a vibration coming out of the fairing, supposedly, which I have not been able to figure out yet, the source hence, I am living with it. But that comes only under high revs and engine braking when the RPM is a bit on the higher side.
Other than this, I have not faced any quality issues as such in my bike. If you have any specific doubt then could say on it.
Done 10000+ kms on it and I love it . Have used it for highway cruises and total offroadings, with and without pillion. Works like a Gem.
So IMO, its a great bike for your daily purposes and occasional long distance hauls. choice is yours...!!

I got my bke from Pashankar Auto. Went to them as they gave me my bike in minimum time and minimum hassle of paperwork. No particular star dealer here for Pune.n yah Pashankar also happens to be the HO of Honda dealership in Pune.

cheerz...
ride safe and wear helmets...

[Mirhawk]

Hello People! I'm deciding to do some custom work on My TVS Apache RTR 180.
I'm painting the Rim white as in this pic:




and carbon stickering as i this pic:



If someone could point out as where in Pune will I find experts for such work and some rough figures I would be spending?

[niks_devil666]

Off roading on Impulse

Offroad Tel Baila.mp4 - YouTube

[abhinavcrytek]

Hi there ... I am not sure what issues are you concerned of as for me, the issue that I faced was a vibration coming out of the fairing, supposedly, which I have not been able to figure out yet, the source hence, I am living with it. But that comes only under high revs and engine braking when the RPM is a bit on the higher side.
Other than this, I have not faced any quality issues as such in my bike. If you have any specific doubt then could say on it.
Done 10000+ kms on it and I love it . Have used it for highway cruises and total offroadings, with and without pillion. Works like a Gem.
So IMO, its a great bike for your daily purposes and occasional long distance hauls. choice is yours...!!

I got my bke from Pashankar Auto. Went to them as they gave me my bike in minimum time and minimum hassle of paperwork. No particular star dealer here for Pune.n yah Pashankar also happens to be the HO of Honda dealership in Pune.

cheerz...
ride safe and wear helmets...

thanx for the info man ,... booked one today ....a std red or tricolor..whichever comes earlier....

the bastard sales person was indirectly asking for a bribe around 600/- to get the RTO process done ...

but now only thing on my mind is getting my darling..

[nin]

Went to Telbaila yesterday with some more xbhpians from both pune and mumbai...was again an impromptu ride which turned out to be awesome ! Midnight offroading !!

Check this link for the pictures to be updated soon..

https://www.facebook.com/media/set/?set=a.10150676279688382.405796.503803381&type=1

here are some pics..













A thread is also up for approval...will post the link later