The Official Hyderabad Offline Meet(G2G) Thread

[riazmomin]

Riaz bhai, I saw a wheel balancing shop near SR Nagar PS. I saw few cars and bikes getting the things done in that shop. But Im not sure. I'll provide u the information about that shop as soon as possible.

Thanks for the Info Chiyan.
But those Car wheel alignment people dont do for Bikes....Racism you see!
I have 4 Wheel alignment shops at my place..none of them do.

[furioussphinx]

Thanks for the Info Chiyan.
But those Car wheel alignment people dont do for Bikes....Racism you see!
I have 4 Wheel alignment shops at my place..none of them do.

There is a guy who does it in Mehdipatnam near Yaser's place. I got my pulsar rims done there.

[HydBiker]

^^^ Ravi Kiran got his wheels done near paradise. I think it is with Hyderabad's World Famous Hakim's denting opposite RamGopalPet Police Station. Call him up.

[onlinesatish]

^^^ Ravi Kiran got his wheels done near paradise. I think it is with Hyderabad's World Famous Hakim's denting opposite RamGopalPet Police Station. Call him up.

I dont like that fellow's attitude! Almost ended up with an argument with him on a weekend! Dont find anything spl in him too......just like everyone else. He's famous, may be coz its hard to find one in secbad!

[yaser_kb100]

Thanks for the Info Chiyan.
But those Car wheel alignment people dont do for Bikes....Racism you see!
I have 4 Wheel alignment shops at my place..none of them do.

The guy sagar is talking about - he trues the wheels including mags. So if the rim is bent, then we can get it done there. But if it is alignment(with the tyre/tubless on) then we will have to search.

Today around 11-11:30am I was downstairs, changing the clutch cable of my KB and then playing with my kids when I saw a brand new P220 with the lights on and right behind it was a yellow R15, the guys were fully geared and when they came near as suspected I realised they were Xbhpians . I waved at them and hmmmmm no points for guessing. It was Nick(R15) and Yeshu(P220) returning from a ride to Anantagiri, trying to add kms to the run-in of the P220. Nick looked half asleep and was telling me how he had a tough time keeping himself awake as they were only doing like 60kmph avg. They were headed towards Reliance Mart, looking for a lid. Any update on it Nick/Yeshu?

[riazmomin]

I am looking for get my bikes wheel balanced, as its suggested to get it done when ever the tires are changed or removed and replaced again.

making the wheel alanced helps in decreasing the vibrations caused by the wheels.

[Yeshu_hyd]

The guy sagar is talking about - he trues the wheels including mags. So if the rim is bent, then we can get it done there. But if it is alignment(with the tyre/tubless on) then we will have to search.

Today around 11-11:30am I was downstairs, changing the clutch cable of my KB and then playing with my kids when I saw a brand new P220 with the lights on and right behind it was a yellow R15, the guys were fully geared and when they came near as suspected I realised they were Xbhpians . I waved at them and hmmmmm no points for guessing. It was Nick(R15) and Yeshu(P220) returning from a ride to Anantagiri, trying to add kms to the run-in of the P220. Nick looked half asleep and was telling me how he had a tough time keeping himself awake as they were only doing like 60kmph avg. They were headed towards Reliance Mart, looking for a lid. Any update on it Nick/Yeshu?

Bhayya it was nice meeting u and the kid . Actually there were good helmets there but the thing was they were of l size , which means i couldn't put my glasses in , without which driving is impossible for me . SO again gotta hunt for helmets some other day




@ All :- Yesterday we went to Ananthagiri , actually i wanted to go somewhere so that i could munch miles implying the completion my RUN-IN soon .

Riders:-
ME-(Yeshu_hyd)
Nikhil:-(Nikhpaul)
Sunny:-(Bikersunny) and his friend .
on the way we missed the route so around 15kms was extra , but while returning back it was anaother case though . COuldn't enjoy much as it was too hot out there. But what so ever it was , my odo reading added 200kms more. Tried hard to control but couldn't restrict from going to 65-70 on the highway .


Here is the album :-

Log In | Facebook

[Sarvajit]

I am looking for get my bikes wheel balanced, as its suggested to get it done when ever the tires are changed or removed and replaced again.

making the wheel alanced helps in decreasing the vibrations caused by the wheels.

I know of a place in Punjagutta (I was there on Saturday for my friend's RTR too). They through wheels, rims, forks etc.&also have mechanics there. I got my Fiero F2's rims throughed , but felt the procedure was primitive. Yet to find a place where they do it as professionally as they do it for cars.
Same goes for the place which chiyaanchinnu has mentioned, near SR Nagar Police Station.
I know both the shops&can take you there, but you are bound to lose some paint on your alloy if they hit it even a bit.
If you are fine with that (we can try our best to minimize it by being there), I can take you with me.
I had also been to a car wheels shop recently with my friend. I can ask him to enquire if they would do it for bikes too.
I will get back with some details, you can also call me on +91-99492-11031.
At the end of it, I would still say if your bike is running fine, better to give it a pass-bike wheels don't need alignment/balancing like cars, unless they have taken a hit&are wobbling.

[sam92]

as you all know i have a 220 and i have a nail which SCREWED my rear wheel

its loosing air fast .. any tubeless repair shops ?

will ashoka wheels do the job ?

[onlinesatish]

as you all know i have a 220 and i have a nail which SCREWED my rear wheel

its loosing air fast .. any tubeless repair shops ?

will ashoka wheels do the job ?

Any punchture shop wala will do it!

[yaser_kb100]

as you all know i have a 220 and i have a nail which SCREWED my rear wheel

its loosing air fast .. any tubeless repair shops ?

will ashoka wheels do the job ?

If its just the tyre that needs to be fixed, then I guess these days most puncture waaalas have the tubless puncture repair kit and should be able to help fix it for you.

If it is the rim then you can contact Naveen(Near sporting ground Vijaynagar Colony, Masabtank) at 9951101951.

We had once got Sagar's pulsar rim fixed here and I think he did a decent job wherein the rim was given a single coat of color too. What I understand is that a mag wheel can't be trued using a hammer/spanner. It first is heated to a certain temperature and then brought back in shape. The color gets damaged due to the heat and a coat of color makes it all well

[MadMax46]

i found a guy near my home...but his defination of wheel balancing was different
Still in search!

Call Ravi@9849876680. Locted near Karkhana, extremely good with his work and pretty reasonable pricing too. (last time i was there, i was surprised to see castrol bike zone guys and HH svc guys dropping down to his workshop with dozens of wheels and forks)

Actually there were good helmets there but the thing was they were of l size , which means i couldn't put my glasses in , without which driving is impossible for me . SO again gotta hunt for helmets some other day @ All :- Yesterday we went to Ananthagiri , actually i wanted to go somewhere so that i could munch miles implying the completion my RUN-IN soon .

Riders:-
ME-(Yeshu_hyd)
Nikhil:-(Nikhpaul)
Sunny:-(Bikersunny) and his friend .
on the way we missed the route so around 15kms was extra , but while returning back it was anaother case though . COuldn't enjoy much as it was too hot out there. But what so ever it was , my odo reading added 200kms more. Tried hard to control but couldn't restrict from going to 65-70 on the highway . Here is the album :-Log In | Facebook

If you looking for lids, try Ritesh at Adventure on the rocks. Spoke to him couple of days back and he just got a huge collection of LS2 lids, loads of sizes to choose from too. Niki was telling me about ur ride and how he mistook Bakers den as bikers den and pulled over lol. Nice set of pics there too

[Yeshu_hyd]

Call


If you looking for lids, try Ritesh at Adventure on the rocks. Spoke to him couple of days back and he just got a huge collection of LS2 lids, loads of sizes to choose from too. Niki was telling me about ur ride and how he mistook Bakers den as bikers den and pulled over lol. Nice set of pics there too

Ya... he was like all of sudden stopped at a place , i thought may be waiting for me , but then realised tat to refill tummies . Then he told the way he mistook bakers den for bikers den.

About lids , i searched a lot finally got myself a studds ninja for temporary use till i get a good one .

[kkrk2]

I wish a happy and fun filled day to yaser bhai,....

" h a p p y b i r t h d a y "..........

[shabbarak]

oh so its your Birthday Yaseer Bhai

" a very Happy Fun Filled Birtday to you "