[Ownership Thread]: Yamaha YZF-R15 - Page 381 - xBhp.com : The Global Indian Biking Community

MR ACE · 04-04-2009, 11:59 PM

Quote:

Originally Posted by digislayer

Guys, great news!

"A Juice Box for Yamaha R15 is currently under development. There is no other bike (manufactured in India) for which the unit exists."

Me and DriftKingNT knew this before only, but it's made public now:

What's a Two Brothers Juice Box? fuel injection controller!!! |

I just can't wait!

Cost is the only problem now, $300! Almost 15k INR

What About The Low End Torque ? Will It Improve ?

singhisking · 04-05-2009, 06:13 AM

Quote:

Originally Posted by Adway

Good idea! Any takers from Pune? I'm game, if it can come down to atleast 3k/head.

Hi ,
I have recently shifted to the Big Mango (Mumbai) from Pune and would defintely be interested in a share for a Mumbai based Tool,if there are no takers from Mum then will go with my fav city Pune for a share along with Adway,
my 2 cents
cdr gill/singhisking

HydBiker · 04-05-2009, 07:17 AM

Quote:

Originally Posted by ACE_HUNTER

What About The Low End Torque ? Will It Improve ?

it is still under development... and they say there will be options to choose from... so, there should definitely be something for low end improvement

navnish · 04-05-2009, 09:25 AM

Quote:

Originally Posted by HydBiker

^^^ good, shall await more details...

Here you go . this is a small list of problems . This is just 1/2 of the list. I wonder how the SS guys are going to check if these sensors are working or not ...

Quote:

Originally Posted by digislayer

Guys, great news!

"A Juice Box for Yamaha R15 is currently under development. There is no other bike (manufactured in India) for which the unit exists."

Me and DriftKingNT knew this before only, but it's made public now:

What's a Two Brothers Juice Box? fuel injection controller!!! |

I just can't wait!

Cost is the only problem now, $300! Almost 15k INR

300$

even if you buy this you will need a FID to diagnose if things are fine in the bike...

saurabhdayal84 · 04-05-2009, 05:57 PM

front wheel lock was not fitting in the bike so just put a lock in the front disc brake. check the attachment.
pls let me know if any of u hav some better option

MR ACE · 04-05-2009, 07:01 PM

Quote:

Originally Posted by HydBiker

it is still under development... and they say there will be options to choose from... so, there should definitely be something for low end improvement

Oh If I Buy The Bike Rather Than RTR 160 Fi I Get Some Juice Box Near Furure Right ?

vijith.unnithan · 04-05-2009, 07:36 PM

Quote:

Originally Posted by digislayer

He mentioned that it happened in a span of 1000kms, which isn't drastic at all!

And the Densos..I SO hate them! Maybe the model the manufacture for the 150cc engine of the R15 is not able to take it. Cos, R15's engine is not just any other 150cc, and has to deal with really high RPMs, at increased heat levels. Thus the failing of densos for this purpose. If you notice, all the cars(atleast most o' them) have a LOT lesser running RPM on an average when compared to bikes. So, Denso might be successful in that application,simple

@digislayer

Sorry i couldnt get time to check the spark plug used on my bike.. (stuck with damn work)

I was going through the manual to check the service dates and in the last few pages its mentioned that tha spark plug used is NGK
/CR8E

. does this mean that Yamaha is using a different brand instead of what is mentioned.

Cheers,

V

HydBiker · 04-05-2009, 07:40 PM

^^^ CR 8 E is the model number for the Spark Plug from NGK. I wanted to check the model number of Denso also... does someone have it?

Is it U 24 ESR-N in Denso? that's what is mentioned for Vixion.

DriftKingNT · 04-05-2009, 10:28 PM

Quote:

Originally Posted by HydBiker

^^^ CR 8 E is the model number for the Spark Plug from NGK. I wanted to check the model number of Denso also... does someone have it?

Is it U 24 ESR-N in Denso? that's what is mentioned for Vixion.

Yes it is Denso U24ESR-N.

svjhonda · 04-06-2009, 10:36 AM

Hey, did anybody recieve any messages from Yamaha that 'you serviced your bike from _______ on 25th... and are you satisfied with the service'?

Because I did, and obviously I said no! Just a few minutes back I recieved a call from the dealer whom I serviced it from and his voice was very oily, asking me what the problem was. I told him about the careless service, and the mechs forget to replace fairing screws for which I had to do round trips to the svc just to get some damn screws back in to stop the noise/vibration. He said bring your bike either today or tomorrow and we'll look at all the points where you felt our service was lacking. He needs to submit a satisfaction form signed by me, to Yamaha or they'll do some more arm twisting. So people who are utterly dissattisfied with service, can actually get things done this way!

Oh, and by the way, is the NGK spark plug CR 8 E an iridium one? Or is the Iridium one called CRX8E? I've done 5.5K kms, so I guess it should be better if I change to the NGK right?

View Poll Results: What mileage are you getting on your R15?
30-34	8	13.33%
35-39	14	23.33%
40-44	29	48.33%
45-49	3	5.00%
50+ (You will qualify for The Slowest R15 Owner award if you pick this)	6	10.00%
Voters: 60. This poll is closed

04-05-2009, 05:57 PM	#3805 (permalink)
saurabhdayal84 Junior Member Join Date: Mar 2009 Location: bangalore Posts: 14	bike lock front wheel lock was not fitting in the bike so just put a lock in the front disc brake. check the attachment. pls let me know if any of u hav some better option Attached Thumbnails

04-05-2009, 07:40 PM	#3808 (permalink)
HydBiker Senior Member Join Date: Sep 2008 Location: Hyderabad Posts: 3,205	^^^ CR 8 E is the model number for the Spark Plug from NGK. I wanted to check the model number of Denso also... does someone have it? Is it U 24 ESR-N in Denso? that's what is mentioned for Vixion. __________________ Jawahar Navodaya Vidyalaya Alumni? PM me for an Invitation to *myJNV - the navodayan connect!*

04-06-2009, 10:36 AM	#3810 (permalink)
svjhonda Senior Member Join Date: Sep 2008 Location: Kolkata Posts: 904	Hey, did anybody recieve any messages from Yamaha that 'you serviced your bike from _______ on 25th... and are you satisfied with the service'? Because I did, and obviously I said no! Just a few minutes back I recieved a call from the dealer whom I serviced it from and his voice was very oily, asking me what the problem was. I told him about the careless service, and the mechs forget to replace fairing screws for which I had to do round trips to the svc just to get some damn screws back in to stop the noise/vibration. He said bring your bike either today or tomorrow and we'll look at all the points where you felt our service was lacking. He needs to submit a satisfaction form signed by me, to Yamaha or they'll do some more arm twisting. So people who are utterly dissattisfied with service, can actually get things done this way! Oh, and by the way, is the NGK spark plug CR 8 E an iridium one? Or is the Iridium one called CRX8E? I've done 5.5K kms, so I guess it should be better if I change to the NGK right? Last edited by svjhonda; 04-06-2009 at 10:37 AM. Reason: spelling mistakes

Thread Tools
Show Printable Version Email this Page
Rate This Thread
Rate This Thread:

Register Now for FREE!
Are you registered on xBhp yet? If not, do so now and start participating to be able to share photos and experiences with other members. It will also enable to you have a chance to be a part of xBhp contests and roadtrips in the future! Username: Password: Confirm Password: E-Mail: Confirm E-Mail: Birthday: Image Verification I agree to forum rules