Announcement

**Crank49** · 11-09-2011, 09:49 PM

Originally posted by siddharth_ZMR View Post

60 rs. for chain cleaning or the so called SPECIAL HERO HONDA PETROL ADDITIVE that so claimed increases mileage....
Check whether the chain is cleaned and lubed... and next time pay attention while giving your bike for servicing because they ask you in flow of conversation to add additive... watch out for it and say NO!!!

They have done inner chain cover painting and charged 100 for that. Now I'm sure i'll be happy only after 3 years so that i need not take the bike to svc for regular servicing because of warranty issues. More satisfaction is when it is repaired or serviced by my local mechanic infront of me...

Originally posted by itssaurabh.negi View Post

A quick and effective DIY just done by me

:
Adding relay to ur Bike (if not having already )
Items requried : relay,almost 1 Mt lengthy thicker wire. soldering iron,tape, Fire extinguisher

Kidding
Just connect the 2 wires attached to ur horn on pin no 85 and 86. Check now by pressing horn button, RELAY should CLICK. all goin well now.
now attach a thick wire (as relay will draw heavy current from battery) from +ve point (One shown in attached PIC) and put a 20/30 A fuse in between depending on ur relay.Connect another end of fuse to the PIN No. 30.
And finally connect one wire from PIN No. 87 to one terminal of HORN and connect another terminal on HORN to the battery Negative terminal (One shown in pic), Might be other point in bike as well (Body touching didnt work for me )

so finally its working now,even when indicators ON(earlier it used to give pathetic sound when Honked with Indicators ON). I hope u understand wat i m trying to say

total cost : 60 (relay) + 14 (wire) + 10 Rs (20A fuse ) = 84 Bucks and that mechanic was asking 100 rs just for installation :X

Actualy stock settings are for low Amps for horn.If u add relay horn button sends a signal to Relay and hence relay further sends a heavier current to HORN (as its dirrectly connected to battery ). basically its used to match the increased Current load of accesories lights/horn etc.

u better do,btw they dont do GHAPLA on these things though

Saurabh, whats that relay's name or code? what shall i ask in the shop?

**itssaurabh.negi** · 11-09-2011, 09:55 PM

Originally posted by Crank49 View Post

They have done inner chain cover painting and charged 100 for that. Now I'm sure i'll be happy only after 3 years so that i need not take the bike to svc for regular servicing because of warranty issues. More satisfaction is when it is repaired or serviced by my local mechanic infront of me...

i feel the same thing. those guys cancelled my battery warranty just for having FEW LED Lights. These guys are too much.

Saurabh, whats that relay's name or code? what shall i ask in the shop?

Its a local made relay,the shopkeeper was very confident about its quality though.i purchased it for just testing purpose . u can better opt for "BOSCH HORN RELAY " costing around 120-150 rs (same that Athul bought) HORN RELAY is what its called. feel free to ask if anything help required

**Crank49** · 11-09-2011, 10:02 PM

Originally posted by itssaurabh.negi View Post

Same thing goes with their TEFLON Coating. 350 Rs for 3 times. i have done the same,1 done 2 remaining. otherwise they dont even wash the bike properly .

Don't go for Teflon coating after this 3rd one is done bro. Just get a good wax polish and DIY. They are cheating us by telling that they do teflon coating but actually what they do is wax polishing. Even I've seen traces and scraps of polish wax after my bike was delivered from showroom. I bought one 2 weeks ago for Rs. 40. Its pidilite's [Robert's Liquid Polish] product and works fine.

**Crank49** · 11-09-2011, 10:05 PM

Originally posted by itssaurabh.negi View Post

Its a local made relay,the shopkeeper was very confident about its quality though.i purchased it for just testing purpose . u can better opt for "BOSCH HORN RELAY " costing around 120-150 rs (same that Athul bought) HORN RELAY is what its called. feel free to ask if anything help required

Thanks a lot brother. Its from friends like you i learn many things... Thank you very much.

**itssaurabh.negi** · 11-09-2011, 10:06 PM

Originally posted by Crank49 View Post

Don't go for Teflon coating after this 3rd one is done bro. Just get a good wax polish and DIY. They are cheating us by telling that they do teflon coating but actually what they do is wax polishing. Even I've seen traces and scraps of polish wax after my bike was delivered from showroom. I bought one 2 weeks ago for Rs. 40. Its pidilite's [Robert's Liquid Polish] product and works fine.

I know bro. ther is a guy sitting beside their washin room. after washing his work is to put that polish coat on bike. he has a trunk full of waxes. just wanted to give it a try. I have a Formula-1 Wax.do it in 7-8 days after water wash. but liquid polish is required for fiber and few other parts.

**itssaurabh.negi** · 11-09-2011, 10:13 PM

Google Maharaaj Ki Jai!!

Originally posted by Crank49 View Post

Thanks a lot brother. Its from friends like you i learn many things... Thank you very much.

infact 30 mins back i didnt knew anything bout relays nad how to connect them. Just googled a bit and some courage to do something on my own, and rest u see is in front of me. Internet is full of information,only if we can find it and use it in a proper way. next time u want something to know, just google it . if u r confused googel it more or ask here in xBhp
neednt to say thanx, i m not sharing something of my patented technology, i m just sharing what i learned from internet itself. I hope i could help someone outta it

**siddharth_ZMR** · 11-09-2011, 10:43 PM

Originally posted by Crank49 View Post

They have done inner chain cover painting and charged 100 for that. Now I'm sure i'll be happy only after 3 years so that i need not take the bike to svc for regular servicing because of warranty issues. More satisfaction is when it is repaired or serviced by my local mechanic infront of me...

Didnt get you.. please explain..
and why inner chain cover painting? i have never heard of it? how does it protect the chain?

**Aneesh@4GHz** · 11-09-2011, 10:59 PM

Originally posted by itssaurabh.negi View Post

A quick and effective DIY just done by me

Nice DIY bro,I didint know how to connect a relay and was trying to lean it and was googling it now a days and found this one. Really helpful.

and your current DIY helped a lot.If you can, make a clean and detailed DIY on this on the DIY section with pics.

Ask me if you need any help.

Originally posted by Crank49 View Post

whats that relay's name or code? what shall i ask in the shop?

Ask for horn relay,Avoid china makes,Get Bosch or Roots horn relays,Bosch relay will cost you 130rs.

@ Saurabh Bro

Please add the new two horns to this image and update it,Its a bit confusing to me.

Also post a pic of the fuse and fuse box.

**itssaurabh.negi** · 11-09-2011, 11:12 PM

Originally posted by Aneesh@4GHz View Post

Nice DIY bro,I didint know how to connect a relay and was trying to lean it and was googling it now a days and found this one. Really helpful.

and your current DIY helped a lot.If you can, make a clean and detailed DIY on this on the DIY section with pics.

Ask me if you need any help.
Thanx aneesh.DIY was in testing phase today,will give it a clean job tomorrow. Will post a DIY thread thereafter . BTW i m using the stock horn,its not that Loud as urs but still its far better than what it used to be earlier.

@ Saurabh Bro

Please add the new two horns to this image and update it,Its a bit confusing to me.

I m using the SINGLE STOCK HORN :P

Also post a pic of the fuse and fuse box.

i will connect the 20/25 A fuse in between the battery and Pin No. 30.
wil have to make a JUGAAD fuse box one for that.

My next DIY is going to be on LED Flashers,found a LED FLASHER CIRCUIT,will give it a try soon.(if i get mentioned transistors )

**itssaurabh.negi** · 11-10-2011, 11:36 AM

Enough try on this circuit, its supposed to generate a flashing signal (as required by Indicators) theoretically ,but somehow i am unable to do so.

may be the compenents i m using aren't of the requireed parameters ( R2:50K ohm,R1:5K ohm,C1 : 10 micro farad but 60 Volts )
also all the components are getting heated a lot,dont know why

can that be a problem ??
i was good at electronics but not now

. i m getting a constant voltage O/P )~1.5-2.0 V) across that LED. its not BLINKING. somebody help as i am desperately trying to make this DIY happen

**nrutt** · 11-10-2011, 07:19 PM

hello everyone, i just found this forum from google and already fall in love with it

my hero honda hunk (duel disk digital meter) run already 6720km(i bought in march-11) and im happy with it.

now i want to modify some features, i need some help from you guys.

i will do all by myself (im a good learner and ready to risk if any)

i want to add engine kill switch to my bike so any idea will be great help.

any one knows how engine kill switch works with old hunk? it might help me to modify my new hunk..

thanks very much for your time

**itssaurabh.negi** · 11-10-2011, 08:34 PM

Small idea !!

Originally posted by nrutt View Post

hello everyone, i just found this forum from google and already fall in love with it

Welcome to xBhp,i hope u learn a lot here .

my hero honda hunk (duel disk digital meter) run already 6720km(i bought in march-11) and im happy with it.

Congrats for ur ride.how is the rear disc behaving ? crisp or dampy ??

i want to add engine kill switch to my bike so any idea will be great help.
I also want to do that,i m waiting for my 3rd free service after that i am planning to switch to pulsar switches and use them on stock circuit 9if possible

any one knows how engine kill switch works with old hunk? it might help me to modify my new hunk..
i dont think any HH bike came with Engine Kill switch

thanks very much for your time

As far as i know there is a BLACK wire among those going to ur Ignition switch. Connecting it to earth/neutral will turn the engine off, havent tried it yet . Just came to know from someone ...

**Crank49** · 11-10-2011, 09:06 PM

total km.s cover : 807 km.s
total time period : 2 months
approx mileage : 41 km pl
any major issue faced : No major issues
maximum speed taken : 65 km/hr
maximum RPM touched : 5.5 k
Idle RPM [Hot] : 1.3 - 1.5 k
suggestion (If Any) : Don't ever believe fully what those SVC guys said they've done during free services.
Hope its time for next oil change. Bike feels a bit rough and the oil is a bit sticky. Air-filter was not checked or cleaned at first service, i'm sure and its because of that there is a minor lag in acceleration, i think.

Guys, how many of you think the SVC people have opened bikes crank case and cleaned those filters and adjusted valve clearance etc...? For me they haven't.

**Aneesh@4GHz** · 11-10-2011, 10:41 PM

^^^ When did you done last oil change?

**Crank49** · 11-10-2011, 10:50 PM

Originally posted by Aneesh@4GHz View Post

^^^ When did you done last oil change?

first service at 530 km.

Announcement

CBZ xtreme / Hunk

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment