Announcement

**maxx** · 03-12-2010, 12:47 AM

Help PLease:- Can any one let me know Does the new karizma zmr has a new camshaft? Does it have higher lift than the previous karizma?

**veryhiphop** · 03-12-2010, 09:53 AM

Originally posted by maxx View Post

Help PLease:- Can any one let me know Does the new karizma zmr has a new camshaft? Does it have higher lift than the previous karizma?

huhhhh need to check it...well would suggest you to post your message on http://www.xbhp.com/talkies/desi-bik...pressions.html too as most of the ZMR owners are responding from there only.....

**neo88** · 03-19-2010, 12:54 PM

ZMR Owners across India - ofcourse only XBhp members

Total (18)

Bangalooru (3)
prithvi!! (Black), abhishekk89 (White), m2rockz (White)

Chennai (1)
Ananth (Black)

Vizag, AP (1)
nithinrudraraju (White)

Thrissur, Kerala (1)
Gautamsankar (Colour?)

NCR (3)
Anmol_1990 (Black), veryhiphop (Black), samcoer (Black),

Chandigarh, Punjab (1)
Saminder (Red)

Patiala, Punjab (1)
Sumer_Goyal (White)

Mumbai, Mah (4)
Worrisomebear (White) , Manan (Yellow) , kaemakazi (Black), Vishal_91 (Blue)

Pune, Mah (2)
neo88 (Black) , adabass (White)

Nasik, Mah (1)
Sp!tfire (White)

**anmol_1990** · 03-19-2010, 04:23 PM

completed third service today.....5400 km done and the bike is now in its full flow......

after changing the engine oil it is revving more freely.....

mileage is 40-44 kmpl......

there was a minor noise during rear disk application but it disapperaed now....

**rohitsapru** · 03-23-2010, 05:07 PM

Anmol, how is the stability & handling of the bike at high speeds? I think you have both ZMA and ZMR, would you say that the faring on ZMR improves the aerodynamics at high speeds?

**anmol_1990** · 03-23-2010, 09:27 PM

Originally posted by rohitsapru View Post

Anmol, how is the stability & handling of the bike at high speeds? I think you have both ZMA and ZMR, would you say that the faring on ZMR improves the aerodynamics at high speeds?

well ZMR is much stable than zma-r as it is heavier by 9-10 kg, so it makes the bike rock solid, a better set of tires wud even make it a delight.

**anmol_1990** · 04-09-2010, 02:55 PM

i have finished 6000 km on my zmr, i want to share one thing with other zmr owners, when i change gears i can hear the click sound even when helmet is on and speed is high, i meant to say that gears arent that silent. is this thing a part of karizma's character or if there is some issue???

**torino** · 04-13-2010, 02:19 PM

Hi guys, My friend booked white ZMR two months back.He is yet to get his bike.The dealer keeps postponing the delivery date, says load has'nt come as excuse.As far as I know HH has 3 manufacturing plant together producing close to 4 million bikes every year.I hav'nt seen much ZMR's on the road.Is there any fault with the bike? Is engine overheating and FI problems true with ZMR?
thanks in advance.

**neo88** · 04-13-2010, 02:43 PM

Originally posted by torino View Post

Hi guys, My friend booked white ZMR two months back.He is yet to get his bike.The dealer keeps postponing the delivery date, says load has'nt come as excuse.As far as I know HH has 3 manufacturing plant together producing close to 4 million bikes every year.I hav'nt seen much ZMR's on the road.Is there any fault with the bike? Is engine overheating and FI problems true with ZMR?
thanks in advance.

their are minor issues which do escalate in most of the bikes ( When a new concept is implemented ) . No major issue so far observed, or are being faced.

FI is not a new technology that HH has implemented on this, it's already being utilized in 2 other bikes. tested and proven on other vehicles. When the bike is driven at lower gears at lower speed, the heat is not dissipated efficiently as it happens when you are drving smooth on this bike. But this is not a technical bug, it's a practical issue on all other bikes, where other bikes are not fully faired, you don;t observe it so prominently.

I hope i have cleared all your doubts.

**anmol_1990** · 04-13-2010, 02:49 PM

Puncture Again

My bike today punctured again ....today afternoon. at iffco chowk red light i noticed air pressure was low and got the tyre repaired at a petrol pump 500 metres ahead.

**torino** · 04-13-2010, 06:09 PM

Originally posted by neo88 View Post

their are minor issues which do escalate in most of the bikes ( When a new concept is implemented ) . No major issue so far observed, or are being faced.

FI is not a new technology that HH has implemented on this, it's already being utilized in 2 other bikes. tested and proven on other vehicles. When the bike is driven at lower gears at lower speed, the heat is not dissipated efficiently as it happens when you are drving smooth on this bike. But this is not a technical bug, it's a practical issue on all other bikes, where other bikes are not fully faired, you don;t observe it so prominently.

I hope i have cleared all your doubts.

.
thanks for the reply neo. Why there is a long waiting period? Its not like they have problem in meeting demands. They have 3large manufacturing units.

**neo88** · 04-14-2010, 09:42 AM

Originally posted by torino View Post

.
thanks for the reply neo. Why there is a long waiting period? Its not like they have problem in meeting demands. They have 3large manufacturing units.

might be they are concentrating on number and number do come from commuter segment and not from premium segment. Don't believe in that it's having a technical bug and hence they are not delivering. ( it's all rumors )

Secondly they have not trained the entire group of dealer / distributor across pan india, nor at all the dealer in the same city. So they have to restrict the supply as they are not fully geared to cater this requirement.

This two reason is basically hampering demand supply ratio. The dealer from which i bought this bike is getting in fact more number of bikes than he is expecting and he is delivering the customer well in advance. Probably because HH might have been convinced they are capable of handling and they are getting deliveries in fact before time.

**Ananth** · 04-19-2010, 12:03 PM

Finally Saw a ZMR on TV, After a long time.

YouTube - Limca TVC 2010 - Ogilvy

**razzer** · 04-21-2010, 10:23 AM

Finally got it!

First ride and impression is very positive. It was raining when I got the bike home. Handles really well. Extra weight due to fairing is barely noticeable. Overall, has a solid feel on the road and between the legs.

They could have used better mirrors - i mean, the range of the mirrors is not adequate, or maybe I haven't adjusted them properly. Gear shifting is smooth, though I got false neutral (or whatever that was) twice.

Saw a lot of people straining to look at it

I have had a ZMA-R in the past and needless to say, this one too lives up to my expectations.

**jagjot** · 05-04-2010, 04:07 PM

help please...

hey guys.. im considering a zmr ... im from bangalore... actually i have ordered a bullet (twinspark electra) which is expected in another 15 days.. but i have kind of fallen in love with the zmr... would you guys have any advice for me?

also i would like to know .. since the zmr has no crash guard, what do you guys do to take care of the safety issue.

Thanks,

Jagjot.

Announcement

Hero Honda Karizma ZMR

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment