Announcement

**aalop143** · 07-21-2010, 12:50 PM

r u using air filter if yes ,then which one

**aargee** · 07-21-2010, 12:53 PM

Stock airfilter @Aalop

**BigBore** · 07-21-2010, 01:34 PM

This is the one I've - http://www.treatland.tv/v/vspfiles/p...t-slide-2T.jpg[/QUOTE]

@ Aargee - Thanks for the link. But i had requested if you could please post a pic of "YOUR" Mikuni "FS" thats running on your bike.

**aargee** · 07-21-2010, 01:42 PM

I thought you only wanted to know what's running on my RX & not the specific one running on my RX. But why may I ask

PS - I'm not lying, I really have the one that was posted on the pic.

**BigBore** · 07-21-2010, 02:10 PM

@ Aargee - I wanted to see the picture coz i wanted to see the fitting on your bike with the stock air-filter, cabling, etc.

**aargee** · 07-21-2010, 02:15 PM

Oh!!! I think I'm getting your point;
Mikuni 28mm FS is not a easy fit to RX's stock intake, so is that the specific reason you wanted to see?

**BigBore** · 07-21-2010, 02:32 PM

You are absolutely right Aargee

, i know the Mikuni TM28 is not an easy fit on the RX. I have the same Mikuni TM28 running on your bike which i still havnt fitted. But thanks to you i got the idea of cable job done. Thats the reason i am asking you to post a pic!

Cheers!!

**aargee** · 07-21-2010, 02:49 PM

I'll tell you, its not a easy fit but not extreme difficult; you need to do some push & pull to get the mouth piece of airfilter box to the intake of the carbs. The rubber on the air intake piece on the carb will have a slight bent over & will settle in few months.

Anyway, I'll try getting the pics sometimes this week.

**BigBore** · 07-21-2010, 02:52 PM

Thanks a lot Aargee for the guidance

Will be waiting for the pics.

**aargee** · 07-21-2010, 03:11 PM

Originally posted by BigBore View Post

Thanks a lot Aargee for the guidance

Will be waiting for the pics.

That's a big word to use @Bigbore

, especially to a newbie like me!!!

**yamdoot** · 07-21-2010, 03:14 PM

@ Argee.. what size jets are u using since u said u are using a stock airfilter?

**aargee** · 07-21-2010, 03:51 PM

Originally posted by yamdoot View Post

@ Argee.. what size jets are u using since u said u are using a stock airfilter?

Ok, you cornered me finally

I'm a big ZERO when it comes to carbs & jetting; Sorry I've no idea on this one.
BUT, teach me how to find out, I'll get you the sizes.

**BigBore** · 07-21-2010, 04:14 PM

@ Aargee - Open up the float chamber and read the sizes on the jets!

**aargee** · 07-21-2010, 04:43 PM

Ok, where will it be written? Any pics or some steps will help. Tks.

**jd666** · 07-21-2010, 05:13 PM

It will be written at the bottom of the main jet, and im guessing on the side of the pilot jet.

Announcement

RX rebuild Using 3 Yamaha Variants

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment