Enjoy the ride now !

@psycho - appreciate your help very much & I'm sorry that I couldn't accept it.
@Arvind - Thanks.

But its all not over yet, its just over interval & a good twist in the story. Here're some more pending works...
1. Change the front, rear fenners & rear handle
2. New spokes for both front & rear
3. Bearings, spacers & collars to be replaced in both the wheels
4. 12V magnet to be purchased so that the vehicle gets a new 12V system instead of exisiting 6V
5. Front forks, suspension, meter assy, pilot lamps, meter brackets, LH & RH side covers, front emblem, handle bar, clutch & front brake levers & new number plates to be mounted
6. Last but not the least - complete wiring to be changed along with flasher, RR unit & CDI

Congrats Aargee ! I'm sure all your long thought process/worries for last some weeks on rebuild would have vanished after you took her for a spin.

Hats off to your sheer determination and strong will to build a entirely new (every part) bike.

I'm sure there is not much left to assemble remaining areas.

Once done, do click some pictures and post it.

You know about me & my supersticion right? ; anyway, we'll have them on this forum!!!

FINALLY!!! you got it done the way you wanted it ,congrats argee.....wish i could find a mech like him

Congrats! Enjoy your build Post up a few pics and videos while you are at it.

finally u done it congrats

congratulations!!! i had one shot extra in celebration yesterday night!! lol!

- Very True; I'm glad
Patience; only patience does all this; if you see, when I dumped the other 2 mechs, I never uttered a word on frustration & both of them never know that this work is completed; I'll still approach them for any small works, but will never reveal them as how I got it done
Thanks @Nitin
Thanks @Aalop
Thanks @JD; I need to admit one truth here; when you kept saying pick up some assorted 10 & 12 size bolt nuts, I never understood the inner meaning; but only when working on the motorcycle I realized the meaning; I could appreciate the engineering; I could understand which bolt & nut to use where. Thanks a lot @JD. I owe you one too!!!

Current update on work that are pending
1. Front suspension replacement
2. Front fork replacement
3. To buy 12V magnet & get the 6V generator replaced with 12V
4. Electricals
Well, I've been productive since morning to replace the front, rear fenners, tail lamp, rear turn lights, rear utsav number plate;
Have removed both the wheels & found a unusual thing in the front; the front axle is quite different & is not of stock; I've a challenge to find which motorcycle's axle it belongs to & buy the OE's. So I'm assuming that the bearings will also change accordingly & these are some challenges now; So much for the frontal disc brakes!!!

Congrats Aargee post some pictures of your build

for genuine yamaha parts

try this for genuine yamaha spares with bill of yamaha ...


yamaha factory shop
New #1087
New Link Road
Malad West
Mumbai -400064
Phone: 022-42102700, 022-42102701, 022-42102702
Mobile: 9967483355
Contact Person: Mr. Ajay Bari

That's fantastic information; I'll do that during this week. Thanks @CSabhaya
@Roshiba - Pics I'm not taking any of them as of now as work has not been completed; they may appear eventually once the entire work is completed.

Aargee good that you took up the rebuild work and completed. See it started to rain, if delayed your work, rain would have added agony.

I was about to start my work today packed my spares and came out to catch an auto, however, when I looked up the sky, something told me to hang on. Well, it started with a drizzle and then boom a heavy rains and went back inside.

Now I know why you havent got over your Sunday effect yet
Congrats aargee..its good to finally see you complete the rebuild..

Thanks @Tarc & @Sri
Current update is that I'm done with the wheels with spankling new set of spokes. The entire rear section is completed today; so nothing more to work behind the engine section.