Spare parts thread 2 strokes Yamaha RX family

[yamdoot]

am going ahead with the non OE 5k RXZ tank

Good decision ! and while you start using it, you can rebuild the old tank and keep it for future.

[atulgupta230489]

Good decision ! and while you start using it, you can rebuild the old tank and keep it for future.

thanks bhaiya, will try epoxy in the old tank

[karthikdattag]

Well.. this statement meant that 'something is better than nothing or buying insanely priced new OE tanks!' .Im sure it makes sense to most.

And i just took printout of these comments, just for some safety in the near future.

[karthikdattag]

Karthik, the last picture of carburetor, is that 4TL series? I'm reading something like 2xx series of VM24 etched. Correct me if wrong.

Sri, you are correct. Its a Mikuni VM24 (Made in Japan). Thats why i had marked with the Pen near the 2T oil inlet for easy identification which says "2YA 00".

[mo-mo-biker]

Hi!! I'm on the verge of installing 90/100 kit but heard from couple of guys that the bike dosen't run well after it's installation. IS it true ? I've never seen anyone complaining about the kit so far through the threads. What can be an alternative for a brighter light effect apart from 90/100 kit ?

[SriramEfunds]

Please see the pics of the parts procured and mycomments.


RXZ Tacho gear set. I was told that Oil seal and metal bush is missing. I'm able to realize about the oil seal. With regards to metal bush, need help from this community.




RX100 - ESCORTS MAHLE 0.25 Piston kit. I'm still trying to get 0.75 size.



RX100 - 2T Oil guage, very old one. Though the paint on the marking look intact, but the plating on the needle looks depleted due to age I thought.

[dual disc 200]

Please see the pics of the parts procured and mycomments.

Sooper Dooper Likey...Especially the Ecsorts mahle Piston tin...

[Sherwin]

If you are getting a new tank [even if its non OE], bargain and buy it. Z tanks have become rare.

While you start using the new tank, you can get the older one rebuilt and epoxy coated from inside to avoid rust.

Doc what coating are You talking about? Could You provide more info on that?

[rxdude]

Please see the pics of the parts procured and mycomments.


RXZ Tacho gear set. I was told that Oil seal and metal bush is missing. I'm able to realize about the oil seal. With regards to metal bush, need help from this community.
[ATTACH=CONFIG]89850[/ATTACH]



RX100 - ESCORTS MAHLE 0.25 Piston kit. I'm still trying to get 0.75 size.
[ATTACH=CONFIG]89849[/ATTACH]


RX100 - 2T Oil guage, very old one. Though the paint on the marking look intact, but the plating on the needle looks depleted due to age I thought.
[ATTACH=CONFIG]89851[/ATTACH]

Sree you are just amazing... good parts hunting.

[rxdude]

For Sale RX 100 Made in Japan Clutch bell. interested may please PM me.

[karthikdattag]

Due to high demand on "4Y2" parts for Yamaha RX135, we have come up with a scheme. Details are as below:
　

1. "4Y201 ART" Piston kit when procured as a complete package, i.e 1st + 2nd + 3rd + 4th oversize (58.25mm to 59mm) we will be offering 20% flat discount.
   
   
2. "4Y2" Connecting Rod Kit - 10% Discount
   
   
3. "4Y2" Cylinder + Head Assembly with Rebore + Sandblast + Port Polishing - 15% Discount
   
   
4. "4Y2" Friction Plates (More commonly called Clutch Plates) - 10% Discount
   
   
5. "4Y2" Engine Bearings - 10% Discount
   
   
6. Items 1 to 5 if all ordered as a package then we will offer flat 30% Discount.
   
   

　

Send an enquiry to [email protected] or [email protected].

Note 1: Offer valid till 24.02.2012 only.

Note 2 : No further discounts or negotiation will be entertained.

Regards,
Karthik

[dual disc 200]

Due to high demand on "4Y2" parts for Yamaha RX135, we have come up with a scheme. Details are as below:
　

1. "4Y201 ART" Piston kit when procured as a complete package, i.e 1st + 2nd + 3rd + 4th oversize (58.25mm to 59mm) we will be offering 20% flat discount.
   
   
2. "4Y2" Connecting Rod Kit - 10% Discount
   
   
3. "4Y2" Cylinder + Head Assembly with Rebore + Sandblast + Port Polishing - 15% Discount
   
   
4. "4Y2" Friction Plates (More commonly called Clutch Plates) - 10% Discount
   
   
5. "4Y2" Engine Bearings - 10% Discount
   
   
6. Items 1 to 5 if all ordered as a package then we will offer flat 30% Discount.
   
   

　

Send an enquiry to [email protected] or [email protected].

Note 1: Offer valid till 24.02.2012 only.

Note 2 : No further discounts or negotiation will be entertained.

Regards,
Karthik

Karthik, pls. don't take this offensive. I feel you should put up the approx rates too! If you feel it shouldn't, let it be.

*Peace*

[karthikdattag]

Karthik, pls. don't take this offensive. I feel you should put up the approx rates too! If you feel it shouldn't, let it be.

*Peace*

Hello Ram, no problem. But let me explain as to why i don't put up the rates:

1. Firstly when the post goes live, it stays here for months or maybe years. Prospective buyers come to me asking for the product, let us say a "4Y2" bore for the price i have mentioned say 10months ago, do you think the prices will be the same? It will basically lead into confusion & then chances are i will lose the said order.Every order is unique with its own customization.
   
   
2. Next, with the dollar prices fluctuating, our prices also vary a lot. Let me explain this more clearly. If you take the exchange rates between USD & INR for last 1 Year, the Minimum value was 1USD = 48.6 INR & Maximum value being 1USD = 57.13 INR (Source www.xe.com). Now suppose i get a bore for say 100USD, for minimum limit it would be Rs.4860/- and for maximum limit it would be Rs.5713/-, thats a difference of approx Rs.1000/- !!!!!!!!! We are talking only hundered dollars here, if it was 1000 USD, the change would be in excess of Rs.10,000/- !!!!!!!! That is a huge difference just owing to dollar fluctuation.
   
   
3. Coming to last but not the least point --------> The source. We have multiple sources & all of them charge differently depending on their financial situation, market demand & ofcourse most importantly availability. The band is huge to even discuss here.

So how can i commit on a value straight away when i myself will not be knowing what is our landing cost. These item values can't be forecasted. And also we dont keep these items in stock. Its more of make-to-order basis. If you go through this section in brief i had already mentioned this limitation long back when i was dealing with Indian bores.

Let me take a classical live case that happened with me with our very own member on xbhp long ago. I received an enquiry for 5-speed bore long ago, the then pricing was quite low & the pricing i got after receipt of payment from my sources were 1.5 times the original pricing. I had no option but to cancel the order & refund the amount to customer. All this happend becuase of a silly ad i put up in xbhp classifieds in 2010 for 5-speed bore. To my surprise i get enquires of this bore even to date for the 2Yr old pricing lol !!!!!!!!

Hope i have clarified my point.

Regards,
Karthik

[dual disc 200]

Hello Ram, no problem. But let me explain as to why i don't put up the rates:

1. Firstly when the post goes live, it stays here for months or maybe years. Prospective buyers come to me asking for the product, let us say a "4Y2" bore for the price i have mentioned say 10months ago, do you think the prices will be the same? It will basically lead into confusion & then chances are i will lose the said order.Every order is unique with its own customization.
   
   
2. Next, with the dollar prices fluctuating, our prices also vary a lot. Let me explain this more clearly. If you take the exchange rates between USD & INR for last 1 Year, the Minimum value was 1USD = 48.6 INR & Maximum value being 1USD = 57.13 INR (Source www.xe.com). Now suppose i get a bore for say 100USD, for minimum limit it would be Rs.4860/- and for maximum limit it would be Rs.5713/-, thats a difference of approx Rs.1000/- !!!!!!!!! We are talking only hundered dollars here, if it was 1000 USD, the change would be in excess of Rs.10,000/- !!!!!!!! That is a huge difference just owing to dollar fluctuation.
   
   
3. Coming to last but not the least point --------> The source. We have multiple sources & all of them charge differently depending on their financial situation, market demand & ofcourse most importantly availability. The band is huge to even discuss here.

So how can i commit on a value straight away when i myself will not be knowing what is our landing cost. These item values can't be forecasted. And also we dont keep these items in stock. Its more of make-to-order basis. If you go through this section in brief i had already mentioned this limitation long back when i was dealing with Indian bores.

Let me take a classical live case that happened with me with our very own member on xbhp long ago. I received an enquiry for 5-speed bore long ago, the then pricing was quite low & the pricing i got after receipt of payment from my sources were 1.5 times the original pricing. I had no option but to cancel the order & refund the amount to customer. All this happend becuase of a silly ad i put up in xbhp classifieds in 2010 for 5-speed bore. To my surprise i get enquires of this bore even to date for the 2Yr old pricing lol !!!!!!!!

Hope i have clarified my point.

Regards,
Karthik

Completely Understood Karthik, Appreciate the effort taken to explain how things work. Just a small clarification. Do you think that even a ball park figure keeping costs on the higher side for us to know how much will each cost isn't possible too?

Say a product is priced at 5$
Landing cost for you is 8$
Ball park figure to a potential seller keeping everything in mind should be somewhere 10-12$ Excluding Shipping

Won't this kind of Ball park figure also isn't possible?

Again, if it isn't possible. It's totally cool.

Just anxious about how much Moolah would be required to get these. Again don't want to PM and trouble you like Window Shoppers. Hope you understand and I'm sure this would be running in every two stroke enthusiasts mind here.

*Peace Again*

[SriramEfunds]

@Karthik:- When you are not in a position to know the price(including landing costs), on what basis the discounts are given? You may respond or react to my question.