is the scratches visible on the metal part of the silencer??
Luckily,mine is not that visible.
You can buy one metal plate from the spares shop.It wont cost much,i beleive

Price list

Part Price
Headlight 1080
Fairing 384
Wind Shield 174
RH lever 104
Handle weight 59
leg guard 122
Break paddle 159
scilencer plate 269

Its not gonna affect any thing on your bike.. Don't worry... use the kill switch..

HH service

1)Wash
2)Take the chain cover lube the chain.
3)Take the air filter out shake it up and down as if your finger is on fire.
4)Change the engine oil from the barrel(veedol).
5)check the clutch play.
6)polish the bike.

This is ALL they do not a bit more.

The castrol bike zone guys do this:

1)wash
2)take remove the back tyre use high pressure air to remove the dust apply grease.
3)remove the front disk scrape the disk pad(they do it to the rear brake shoe too).
4)Apply grease to the rod that goes through the front disk they do the same thing to the rod that is removed when the rear wheel is take apart.
5)Take out the spark plug and scrape it with sand papper .
6)clean the carb.
7)check the clutch play .
8)clean the chain in the chain lubing machine(i dont know its name)
9)check the battery and charge it.
10)Set the idle with that thing that looks like a calculator.
11)check the air pressure.
12)apply polish.
13)change the oil and pour castrol crap.
14)Thats all i remember.


I wanted to check the compression on my xtreme that has done 16000kms in 7 months but they refused saying its only for old bikes.
And they also scared me to change the clutch plate as the gear lever has
become a little hard.Thanks to sarvajit and a few others i was not cheated
and i see them change clutch plate on most bikes that come their.

I my exp,. HH/Honda SC suck big time.

Hi Abhi.... Just read this.. Hope you are fine.. Wish you and you BiKE a very speedy recovery...

Hope I could help but I've no idea about insurance claim and stuff.. but would like to share this -- please use both front & rear brakes while braking.. (60-70% front and 40-30% rear..) This way your bike will not loose control..

Get well soon and don't worry your bike will get back to shape in no time

Eugene

no they are not visible untill someone really want to find scratches on bike...
the scratches were on silver metal part...

thanks you, eased me a great deal..
will replace fairing and RH crash guard,(is it available in seperate pieces RH and LH or i have to buy both????)..
thanks again
yes, i will start using both brakes now before i used either front or rear to brake...
luckily not much injury was taken by me than my bike...

LH and RH leg guard are seperate ..price i have mentioned is for one side only.

thanksss..
by falling should self,engine parts get damage no signs on my bike as it didnt felldown very hardly.. it was a soft crash..

Hey guyz,someone has made some scratches on ma bike..Also,has made a hole in the rear seat.Feeling sad for my bike now

hi guys,
someone has made a scratch on the tail of my vehicle also the paint is gone on the edge of the scoop...i don know if this has happened recently and how it happened.9 days since i took my bike

I can totally understand how you guys feel about this incident.

Stuff like this cannot be avoided totally. But there are minute precautions that can be taken.
This is what I do.. Park at designate parking space. Generally malls will have a good parking zone. Yes we need to pay there but if you love your machine then y not pay the 10 bucks.. Also while parking in malls and office parking bays I try to find a corner spot where bikers won't generally go.. Not possible @ malls but yes in office I get single space (lucky me).... Park bike on main stand where there is a wall on the right side. so even if another bike is parked to your left on side stand it won't touch your bike......

Also, while parking at home(especially apartments/residential areas) get a bike cover.. so tat kids won't interfere with your machines..

Cheers n Ride Safe
Eugene.

ya dude i am doing it these days and also got a cover.today i parked my bike on a street side.i was approaching my bike to take it.the street was large enough to accomodate any big car.but two big cars(ambassador and indigo)tried to squeeze and the ambassador's bumper gave a gentle rub on the metal part over my silencer.
the bike moved a little bit and came back to rest.luckily no scratches or no cracks or vibrations.lucky me.thank god

plz help me

i want 2 buy a new bike m confused with pulsar 180. it does not have kick start should i go 4 it plzzzzzzzzzzzzz seriously help me plz.wht if electric start dosent work then wht??????????????????????????

guys which chain lube i should go for???

When asked the same at the showroom while buying my room mate's avenger, I remember the sales guy saying "There is push to start." We were like "what" "???" and then he says Push the bike - 2nd gear - leave the clutch - lol the engine roars ... Here's the solution .. Awesome na?

Jokes apart ... You can definitely go for the 180 UG IV... My baby's been with me for the past 3 months now and no prob with self start till date..

Also - One of my flat mates owns a Pulsar 200 and one owns an avenger 200.. Both the bikes has no kicker.. But no problem till date.. Been using their respective bikes for the past year and a half..

This is what I came across when I searched XBhp - OKS 451 is the one. ~ Rs 350 per can
If any1 has any idea of any such product and availability in B'lore please post
Thanks in advance

More details on OKS 451 - http://www.xbhp.com/talkies/145985-post1093.html & http://www.xbhp.com/talkies/145004-post1838.html

Where in B'lore can I buy this product?