If you're using Yamalube 10w40 oil then it makes noise over 6.5k rpm. Have switched to Elf 10w50 fully synthetic, noise is bit reduced.
Announcement
Collapse
No announcement yet.
Yamaha FZ-16/ FZ-S
Collapse
X
-
Re: Yamaha FZ-16/ FZ-S
Its 2018 manufactured FZ-S, rear disc variant, done almost 7500 kms, riding is bit low since March due to fact more inclined towards my other ride (Yamaha RX-100 & Grand i10).Originally posted by truelypulsarian View Post
If you're using Yamalube 10w40 oil then it makes noise over 6.5k rpm. Have switched to Elf 10w50 fully synthetic, noise is bit reduced.
-
Yamaha FZ-16/ FZ-S
Hows the Elf FS oil performing.Originally posted by €lixir View PostIts 2018 manufactured FZ-S, rear disc variant, done almost 7500 kms, riding is bit low since March due to fact more inclined towards my other ride (Yamaha RX-100 & Grand i10).
If you're using Yamalube 10w40 oil then it makes noise over 6.5k rpm. Have switched to Elf 10w50 fully synthetic, noise is bit reduced.[ATTACH]250634[/ATTACH]
Iam using Liquimoly FS oil.
Any improvement in gear shifts with the elf???
If possible post a video of your bikes engine sound.Last edited by truelypulsarian; 07-23-2019, 07:06 AM.PULSAR 180 DTSI- 2007
PULSAR 220 DTS-FI - 2008
PULSAR 220 DTSI - 2011
SUZUKI GIXXER - 2015
Comment
-
Re: Yamaha FZ-16/ FZ-S
Don’t repaint, instead replace the parts.Originally posted by Raty_FZ View PostI had FZ S v2 grey color bought in 2015 and clocked 29k KMS till date. Paint shade is fading much quicker. So planned for a repaint. Does anyone repainted FZ v2. Also need suggestions for repainting.
Comment
-
Re: Yamaha FZ-16/ FZ-S
Petrol tank both panels + front fender + side black panels will cost approx 2500 max.Originally posted by Raty_FZ View PostI thin replacing parts will be costlier than repaint. I need to replace petrol tank, Front Mudguard, side black panels so it will be costly.Regards
Saikat
Comment
-
Re: Yamaha FZ-16/ FZ-S
I was returning home from a long extreme monsoon trip. Had ridden over 2300 kms in torrential rains and super bad roads covering Hyderbad - Goa - Amoli - Satara - Mahabaleshwar - Pune - Rajmachi - lonavala - Khandala. On the way back to hyderabad from Pune, after covering 150 kms, my drive chain snapped while I was cruising at 100 kmph.
The chain immediately locked the rear wheel and I went 150 meters sliding (fishtailing the rear wheel). I could manage to contersteer the slide enough to not crash. the bike came to a halt after 150 meters of sliding.
The damages were catastrophic. I had to get the bike toed on two different trolleys (chota haathi type / Ashok Leyland).
PS - The chain had done 24000 kms before this incident. The chain was making horrible noises in the last 200 kms before the mishap.
I started sliding before that board on the left.Last edited by bobisbacktorock; 09-05-2019, 09:06 AM.
Comment
-
Re: Yamaha FZ-16/ FZ-S
Mechanical failure happens to the best of us, so that's that. I'm just glad you're alright.Originally posted by bobisbacktorock View PostI was returning home from a long extreme monsoon trip.
As for the chain, wasn't it lubed? If it was then what did you use?
I've ridden my CT100B for close to 8000kms on the GQ circuit in under 2 weeks, and used to lube my chain at the road side mechanics(read used engine oil) once every 2 days or so as I covered about 600~900kms per day.
The drive chain tends to be the part that's usually forgotten about, hope that's not the case.
Ride Safe,
A.P.Motorcycling Experience:
2000 ~ 2017 Y2K Kinetic Zoom (Disposed at 15k)
2011 ~ 2015 Hero Honda Karizma R (Sold at 56.5k)
2013 ~ 2014 Bajaj Discover 100 4G (Sold at 16.5k)
2015 ~ 2017 TVS Wego (Totaled at 18k)
2015 - Bajaj Pulsar 220F (Currently 31k) < Garage Queen!
2017 - Bajaj CT100B (Currently 21k) < 'Golden Quadrilateral' Runner!
The Ride was Good, but Life is short, spend it Wisely!
Adios Comrades!
A.P. 2018
Comment
-
-
Re: Yamaha FZ-16/ FZ-S
hey great to see your bike is okay now .. what about the swingarm? noticed in your previous pics it was also damagedOriginally posted by bobisbacktorock View PostFinally did DIY and fixed the broken machine. Everything is working fine now.
Replaced :
1. All bearings (2 wheel bearings + 1 Sprocket bearing)
2. Sprocket bearing oil seal
3. Axel Nut
4. Drive chain tensioner
5. Chain sprocket set
[ATTACH]251251[/ATTACH]
Parts Cost : 5000 INR approxBajaj Pulsar 180 - 2007 to 2015
KTM RC390 - 2015 to 2018
Yamaha FZS FI DD - 2018 to present
Comment
-
Re: Yamaha FZ-16/ FZ-S
Forgot to mention ... replaced the swing arm too.Originally posted by vanp View Posthey great to see your bike is okay now .. what about the swingarm? noticed in your previous pics it was also damaged
Comment
-
Re: Yamaha FZ-16/ FZ-S
The Journey before the accident :Originally posted by bobisbacktorock View PostFinally did DIY and fixed the broken machine. Everything is working fine now.
Replaced :
1. All bearings (2 wheel bearings + 1 Sprocket bearing)
2. Sprocket bearing oil seal
3. Axel Nut
4. Drive chain tensioner
5. Chain sprocket set
6. Swing Arm
[ATTACH]251251[/ATTACH]
Parts Cost : 5000 INR approx
PART - 1
PART - 2
PART - 3
Last edited by bobisbacktorock; 09-14-2019, 09:38 AM.
Comment
-
Re: Yamaha FZ-16/ FZ-S
4 years is a good and healthy battery life. Time for you change itOriginally posted by Raty_FZ View PostHI,
What is average life of a battery? Mine is 4 years old and ran 30000 Kms. Now its taking some seconds to light the instrument console after ignition switched on.
Honda Dio [2010 - 2011]
Yamaha YZF R15 V2 [2011 - Present]
Yamaha YZF R3 [2016 - Present]
What's next? :)
Comment



Comment