Tweet
Re: Ninja 300: Ninjette Calling
I see labour charges. That means no free services ?
I see labour charges. That means no free services ?
-
Ride, ride and ride.. But always do it responsibly..
-
Re: Ninja 300 Automatic engine shutdown
@Raj Kamal R: Hmm ok dude, needless to say just take care of her till then.... @arnavsameer & [MENTION=28851]Arsenic[/MENTION]: Nice clicks..Last edited by sp33dfr33k; 07-09-2013, 12:10 PM.Comment
-
Re: Ninja 300: Ninjette Calling
No Kawasaki has no free services all are paid.Originally posted by Ivin View PostComment
-
Re: Ninja 300: Ninjette Calling
I don't think they have free services for the Ninja.Originally posted by Ivin View Post
EDIT: Does anyone use normal unleaded fuel for the 300? Are there any engine knocking issues with normal unleaded fuel?Last edited by Ezilkannan; 07-11-2013, 06:56 PM.2013 R15(Sold) | 2014 Duke 390 (Sold) | 2022 Adv 390 | 2022 Ninja 300Comment
-
Re: Ninja 300: Ninjette Calling
I am using normal unleaded fuel for my motorcycle and there is absolutely no engine knocking issue and the engine is silky smooth as ever. I fill in from a HP pump and the fuel quality there is greatOriginally posted by Ezilkannan View Post
SEAT COWL:
What's up guys! Anybody considering installing seat cowl for the Ninja please?
I am looking forward to buy and install one on my motorcycle, since the rear seat is pretty much useless and uncomfortable it is better I cover it with seat cowl also enhancing the overall looks. Any idea where to buy one and what would be its cost?
Thanks,
NikunjRegards,
Nikunj K
Comment
-
Re: Ninja 300: Ninjette Calling
I use BP Speed. Have no knocking issues. Actually, there should not be knocking unless the fuel is really bad.Originally posted by Ezilkannan View Post
Sent from my iPad using Tapatalk HDOnly a biker knows why a dog sticks his head out of a car window.
Multum in Parvo - Much in Little
"Yes, it is FAST! No, you CAN'T ride it!" - http://www.xbhp.com/talkies/general-...a-300-san.htmlComment
-
Re: Ninja 300: Ninjette Calling
Don't pbk sell seat cowls as accessories?Originally posted by Arsenic View Post2013 R15(Sold) | 2014 Duke 390 (Sold) | 2022 Adv 390 | 2022 Ninja 300Comment
-
Re: Ninja 300: Ninjette Calling
Nah, not yet and not even sure if they're shipped to India yet! I am waiting for one badlyOriginally posted by Ezilkannan View PostRegards,
Nikunj K
Comment
-
Re: Ninja 300: Ninjette Calling
Saw an entry in eBay for seat cowls. Maybe you can try importing a piece. Kawasaki Seat Cowl: Motorcycle Parts, Accessories | eBayOriginally posted by Arsenic View PostComment
-
Re: Ninja 300: Ninjette Calling
Hello fello Ninjette Riders!!
I am taking my girl for the first service tomorrow early morning to the workshop at Kirti Nagar. This being my first bike, so this is literally my first - first service
Need some valuable advice and points that I should take care during the first service.
Also any delhi rider who could guide me to the workshop is also welcomed. As I am not so familiar with Dilli galis.
Thanks in Advance!!Comment
-
Re: Ninja 300: Ninjette Calling
A Ninja 300 for first bike, damn! you are one lucky phellow.Originally posted by Raj Kamal R View PostHello fello Ninjette Riders!!
I am taking my girl for the first service tomorrow early morning to the workshop at Kirti Nagar. This being my first bike, so this is literally my first - first service
Need some valuable advice and points that I should take care during the first service.
Also any delhi rider who could guide me to the workshop is also welcomed. As I am not so familiar with Dilli galis.
Thanks in Advance!!
Usual stuff, clean oil and air filters, oil change, brake and battery check. Read the owners manual to get an idea and note down any/no scratches on your bike before and after.Comment
-
Re: Ninja 300: Ninjette Calling
There is nothing special involved in the 1st service. Get the chain cleaned and lubed. Make sure that the oil they use is Motul as with me they tried to pass off Castrol, since i insisted they used Motul.Originally posted by Raj Kamal R View PostComment
-
Re: Ninja 300 Automatic engine shutdown
[MENTION=26077]abhimanyu31[/MENTION] : some q's on the 'ride-on'
1. where did u get the ride-on treatment done from in mumbai / thane?
2. how much did it cost - the solution itself?
3. does the solution work with nitrogen filled tires? [i know it does for conventional air filled tires since the solution will rotate along the perimeter of the inner-wall of the tyres as the bike runs. but does this hold true for nitrogen filled ones, considering that nitrogen reduces the inner temperature of the tire dramatically & hence might result in the ride-on solvent getting lumped-up?!]
4. can this be used with tubed tires as well?◦ ● 4-wheels move the body... 2-wheels move the soul ● ◦Comment
-
Re: Ninja 300 Automatic engine shutdown
No... For tube tyres.. Think, the principle is it will seal the hole in the tubeless tyre by covering it.. So in tube tyre, u can't put it inside tube (ObviOriginally posted by whymail View Post
) and even if you manage put on tyre (u can't since tube will occupy the space) , it can seal the hole only in tyre and still the tube will be leaking air inside the tyre itself and eventually you'll run Flat.
Other q' s abhi will help
Sent from my MT11i using xBhp Connect mobile appIts better to sweat than bleed!! "AGATT "
sigpic
Comment
-
Re: Ninja 300 Automatic engine shutdown
[MENTION=56279]siddharthsure[/MENTION] :humm makes sense for the thing nor working on tubed tires. i still have my apprehension on the nitrogen filled tires tho... lets see what revert abhi has... have also posted a query on the ride-on site
◦ ● 4-wheels move the body... 2-wheels move the soul ● ◦Comment
Comment