Announcement
Collapse
No announcement yet.
Benelli TNT 25 Ownership Experience
Collapse
X
-
Re: Benelli TNT 25 Ownership Experience
Hi [MENTION=87900]JpDas[/MENTION] maintenance is in between 2500-4000 for every 4 months, you can refer to earlier pages for discussion had on maintenance costs.Originally posted by JpDas View PostHello All,
I am from Pune and going to get my 25 next week. Will need your help regarding the accessories and maintenance .
Thanks and Cheers
Accessories- their are not much I may be not aware if there are more than I am listing
i) Frame Sliders
ii) Foldable / adjustable levers
iii) After market exhausts (though i havent seen personally)
iv) Tank bags and saddle bags (if they are considered as accessories)
iv) Decals
[MENTION=81630]anwaykale[/MENTION] [MENTION=9902]unni[/MENTION] and rest can you help on the available accessories
Comment
-
Re: Benelli TNT 25 Ownership Experience
Hi [MENTION=9902]unni[/MENTION] what happened? I overheard a conversation at Pune SVC, chain sprocket is in between 15-17K. Hope you haven't damaged the sprocket.Originally posted by unni3107 View PostBros any idea abt the chain sprocket set cost?
For the past 1 week I am finding it difficult to downshift gears, somehow I feel its hard to downshift. Can somebody help?
Comment
-
Re: Benelli TNT 25 Ownership Experience
Hi [MENTION=87900]JpDas[/MENTION] other accesories for Tnt 25 are there except for after market exhaust other than this only cosmetic accessories are available like " Front brake master cylinder cap, engine trims".
----consecutive posts auto-merged-----
Hi Rohan, please try to clean the gear lever joint which are connected to the engine by using chain cleaner spray and also apply little chain lube (but in very small quantity or else it will be a messy thing to clean) and check whether shifting becomes smooth.Originally posted by rohanrash View PostHi @unni what happened? I overheard a conversation at Pune SVC, chain sprocket is in between 15-17K. Hope you haven't damaged the sprocket.
For the past 1 week I am finding it difficult to downshift gears, somehow I feel its hard to downshift. Can somebody help?
If this does not work visit the service center and check with them they generally change clutch setting and adjust it for smoother shifts. Please let us know what is the end result. Because if you maintain chain at prescribed intervals or whenever necessary chain and sprocket will get worn out.
And regarding the cost of chain and sprocket I heard that cost is around 10K to 13K approx. for Tnt 25. But if possible do check with svc for exact cost.Thanks,
Anway Kale.
Dominar 400 (2018- Counting)
Benelli Tnt 25 (2016- 2018)
Royal Enfield Thunderbird 350 (2014-15)
Bajaj Pulsar 220 DTSI (2010-13)
Hero Honda CBZ Xtreme (2008-10)
Hero Honda Ambition (2007-08)
Comment
-
Re: Benelli TNT 25 Ownership Experience
Today had a bad experience, was riding at 70 plus speed and all of a sudden had to apply brake and engaged clutch because of a fool who inspite of seeing me came in the way. The bike turned off coz of braking and clutch engaging, FI sign lit up and the bike refused to start. Turnes off ignition and after a while bike started, thankfully the problem is not recurring. Has someone faced similar issue if braking in full speed?
@anway thanks for the info. Will do it today first thing in morning and also are you visiting Tathwade SVC for free check up. Will keep posted regarding gear shifting once i libe amd clean the clutch lever.
Comment
-
Re: Benelli TNT 25 Ownership Experience
Chain Sprocket is around 12k. Checked with SVC yesterday. And they are telling average life span is around 10k km which little hard to believe. And regarding the gear lever apply the cleaner bro.Originally posted by anwaykale View PostHi @JpDas other accesories for Tnt 25 are there except for after market exhaust other than this only cosmetic accessories are available like " Front brake master cylinder cap, engine trims".
----consecutive posts auto-merged-----
Hi Rohan, please try to clean the gear lever joint which are connected to the engine by using chain cleaner spray and also apply little chain lube (but in very small quantity or else it will be a messy thing to clean) and check whether shifting becomes smooth.
If this does not work visit the service center and check with them they generally change clutch setting and adjust it for smoother shifts. Please let us know what is the end result. Because if you maintain chain at prescribed intervals or whenever necessary chain and sprocket will get worn out.
And regarding the cost of chain and sprocket I heard that cost is around 10K to 13K approx. for Tnt 25. But if possible do check with svc for exact cost.
Comment
-
Re: Benelli TNT 25 Ownership Experience
----consecutive posts auto-merged-----Originally posted by unni3107 View PostChain Sprocket is around 12k. Checked with SVC yesterday. And they are telling average life span is around 10k km which little hard to believe. And regarding the gear lever apply the cleaner bro.
Hi Rohan, its completely normal even i have faced this when i applied sudden brakes while coming down slope. And best way is to turn off the ignition and then again turn it on and then start the bike.Originally posted by rohanrash View PostToday had a bad experience, was riding at 70 plus speed and all of a sudden had to apply brake and engaged clutch because of a fool who inspite of seeing me came in the way. The bike turned off coz of braking and clutch engaging, FI sign lit up and the bike refused to start. Turnes off ignition and after a while bike started, thankfully the problem is not recurring. Has someone faced similar issue if braking in full speed?
@anway thanks for the info. Will do it today first thing in morning and also are you visiting Tathwade SVC for free check up. Will keep posted regarding gear shifting once i libe amd clean the clutch lever.
As Unni mentioned you can also spray Chain cleaner on the gear lever joints instead of spraying Chain lubricator as this one can create mess.
----consecutive posts auto-merged-----
Nice buddy !! Enjoy the ride buddy. And also do use a good helmet, Gloves and Jacket for your protection.Originally posted by JpDas View PostHere its coming my Benelli <3
And also follow the run in procedure which is difficult to follow but it will be beneficial for a longer engine life (please go through user manual for specific run in process).Thanks,
Anway Kale.
Dominar 400 (2018- Counting)
Benelli Tnt 25 (2016- 2018)
Royal Enfield Thunderbird 350 (2014-15)
Bajaj Pulsar 220 DTSI (2010-13)
Hero Honda CBZ Xtreme (2008-10)
Hero Honda Ambition (2007-08)
Comment
-
Re: Benelli TNT 25 Ownership Experience
10-12k for a chain sprocket set? Wow , how long is the life?Originally posted by anwaykale View PostHi [MENTION=87900]JpDas[/MENTION] other accesories for Tnt 25 are there except for after market exhaust other than this only cosmetic accessories are available like " Front brake master cylinder cap, engine trims".
----consecutive posts auto-merged-----
Hi Rohan, please try to clean the gear lever joint which are connected to the engine by using chain cleaner spray and also apply little chain lube (but in very small quantity or else it will be a messy thing to clean) and check whether shifting becomes smooth.
If this does not work visit the service center and check with them they generally change clutch setting and adjust it for smoother shifts. Please let us know what is the end result. Because if you maintain chain at prescribed intervals or whenever necessary chain and sprocket will get worn out.
And regarding the cost of chain and sprocket I heard that cost is around 10K to 13K approx. for Tnt 25. But if possible do check with svc for exact cost.
Comment
-
Re: Benelli TNT 25 Ownership Experience
10k kms are too less life of chain sprocket for the 250cc bike. The price which dsk is charging is also very high. In R3 I have seen people have changed it at 16-17k kms and price is also on lower side (7k with labour) since parts are not manufactured here.Originally posted by unni3107 View PostChain Sprocket is around 12k. Checked with SVC yesterday. And they are telling average life span is around 10k km which little hard to believe. And regarding the gear lever apply the cleaner bro.
Comment
-
Re: Benelli TNT 25 Ownership Experience
Please post your gear related queries in riding gear thread.Originally posted by JpDas View PostHello guys, any suggestion for a good helmet under 5k ... can't afford more than that for now 😬
Link: http://www.xbhp.com/talkies/universa...read-1461.html
Cheers!
VJ
Once upon a time, a guy asked a girl 'Will you marry me?'
The girl said, 'NO!'
And the guy lived happily ever after and rode motorcycles and watched sport on a big screen TV, went fishing and surfing, and played golf a lot, and drank beer and scotch and had tons of money in the bank and left the toilet seat up and farted whenever he wanted.
THE END
Comment
-
Re: Benelli TNT 25 Ownership Experience
bro i have clocked 8000 km to be precise on 02/12/16. Got the bike on 01/06/16. Out of which bike was not with me for than 3 weeks . Was at SVC. Now gng foe long drive this new year. Looking fwd for that... God SpedeOriginally posted by anwaykale View Post----consecutive posts auto-merged-----
Hi Rohan, its completely normal even i have faced this when i applied sudden brakes while coming down slope. And best way is to turn off the ignition and then again turn it on and then start the bike.
As Unni mentioned you can also spray Chain cleaner on the gear lever joints instead of spraying Chain lubricator as this one can create mess.
----consecutive posts auto-merged-----
Nice buddy !! Enjoy the ride buddy. And also do use a good helmet, Gloves and Jacket for your protection.
And also follow the run in procedure which is difficult to follow but it will be beneficial for a longer engine life (please go through user manual for specific run in process).
Comment



Comment