buying the rtr180

after a futile wait for news on the rtr2xx bike, I've decided to go with the rtr180...not that the rtr 180 is any less a performer but since I will be keeping the bike for a long time I wanted the best I could get my hands on.(no..ninja is way off my financial capacity)..anyways...white rtr180 it is...

It must be some gunk in carb or sparkplug. Get the carb cleaned and spark plug changed.

I have read it many a times. So do you mean to say that increasing the idle rpm would solve the failure of the sprag clutch.

A mechanical part always has a factor of safety which shows the amount of stress it can handle. As the one-way clutch's function is to move in only one-direction a counter force could only be able to break and overcome it's strength threshold which in motorcycle's sprag clutch failures is kickback(engine-backfiring) which is cause due to ignition issues/low battery issues/AFR setting.

So if we take your reason into account, then no way increasing the idle rpm would have an effect on the engine. Lowering the idle rpm will make starting of the engine difficult which will put effect on the starter motor(as well as the battery) as a whole and will require more effort to start , that's it. So just lowering the idle rpm in no way causes an engine to break a mechanical part which requires a more powerful force.


Reasons for sprag-clutch failures:

Kickback: During early morning starts, many a times we encounter kickbacks while kick-starting. Now, Imagine the same thing happening to the sprag clutch when it wants to drive the crankshaft.This opposite/rebound/counter force is enough to break the clutch and that is the reason one here's a loud banging noise while starting.It will happen for 2-3 times until it gives up one day.

Even premature ignition/misfiring signal can cause backfiring. And that is why the TCis are replaced along with one-way clutch Also it is advisable to keep it easy on the throttle while applying electric start.

Inferior Quality of Clutch Material could also be blamed for the failures, so we see stray cases of it's failure as some particular batches come up with this issue.

PS:A bike with leaner AFR setting has more chances of kickback.

Need help urgenty

Hi guys, i have a small problem here. My rear tyre got torn by small metal piece so i left my bike in the scv center and asked them to repair the puncture. After a few hours they called me back and said that it ll cost me 600rs as it not a small puncture but a cut in the tyre . Since it is 1/3 the price of the tyre i wasn't sure of the performance of the tyre after the repair so decided to get a new one.

i have seen u guys changing the rear tyre to R15's rear tyre and IRC tyre.... i tried for the irc but it wasn't available so i went to an MRF shop and asked for zapper q the shop keeper showed to me that zapper q had a completely diff tyre profile ie in 18'

He gave me a zapper vyde which was 120/80-17' i thought of buying it but he said he wasn't sure if it would fit my bike as the wider tyre may come in contact with the side parts. He wanted me to verify before buying the tyre as there was no returning back...

Will zapper vyde 120/80-17' ll fit our rear tyre and what are the other options in mrf i have? If i had to go for zapper q what profile should i look for??

He said it ll cost me 2250 is the price rite??

go in for the zapper that comes in honda dazzler.....

I have seen some 180 owners running on 120 section tyres but the problem is that it will be rob off some performance and also hit the fuel efficiency of the bike. IRC is the only viable option right now.

Btw, the Dazzler now comes with a 110 section Zapper. Ask those MRF guys to arrange for one, if they could.

did u guys know about this???????

we can remove the rubber foot pegs n have a sporty looking pegs..... i read about this somewhere n remover my rear rubber n this is what i found sweeeeeeeeeeeeeeeeeeeet

how awesome is that

Yes we can do that but it will act as a foot massager!!

Answers in bold
@chicane: Let it be buddy. TVS guys are good enough to solve the problem and they have already solved it by using same one way clutch as in RTR160.

It surely does!!!!

Did they really used different one-way clutch for the initial batches!!

If you are not in a hurry, i would ask you to wait until the festive season. Just 2-3 months away.

hi

This is my suzuki fiero
this bike alter for apache rtr

That info i got from TVS fellow by slip of (his) tongue.

That's a good news(for new/prospective owners) as well as bad news(for first batch owners)!!

The R15 pegs look much better than the TVS one's though...

here:


+1


Good goin TVS,
now do somethin for the vibes.