Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Castrol Power 1

Fatigue, sleepiness, & alcohol are the same.

Our Partner

Announcement

Collapse
No announcement yet.

Pulsar 135 LS

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Originally posted by shashi007 View Post
    yes there is vibration but in my case even on 30 when bike was new but just ride the bike at 70kmph for few kms bearing the vibration you will feel less vibration on other day but it still presists above 75-80 for me, and on 90 you are completely on it
    i think you need to talk to svc about the level of vibrations you are experiencing. I don't think it's normal.. even if they say it's common, it's not!! It does vibrate somewhere in the rev range, mine was between 6-6.5k (that's more like resonance frequency), in terms of speed it was like 60-70kmph.. but subsided greatly after second service. Shift to better quality engine oil, that should help you with vibrations & gear shifts.
    Let's bring down the monster of corruption to it's knees.. please visit http://ipaidabribe.com/

    Comment


    • ?

      Originally posted by vrugonnab View Post
      Go for Motul 15W50.. it's a mineral oil or even go for synthetic oil from Motul, which I think is not required for P135.. this oil change should also bring down the vibrations you are experiencing at some speeds. It will also help in making gear shifts predictable & smoother.
      Do i have to purchase it seperatly and give it to svc guyz ?
      I'm just a noob be cool on me bro and will it surely reduce (at least some) vibration
      Because i don't have any other problem in my bike 'm just annoyed with vibration only.
      Avenger 220 Street | P135

      Comment


      • Hi Guys I Have A Major Probs..Please Help Me...I Am From A Small Town(Midnapore) From West Midnapore.

        I Have Pulser 135 Ls.In Midbapore I Visit All the Oil Stores But I can Not Find Any 4T 20w50 Engine Oil.They All Have Car Engine Oil Like Castrol GTX.
        But Castrol Actve 20w40 Is Avalaible.

        Only 1 20w50 Oil Is Avalaible Here That Is Bajaj DTSi 10000 20w50.But I Read In This froum This Oil Is Not Good.Also I Used This Oil But Not Satisfied.

        So What Can I Do?...Go For Castrol 20w40 Oil(But In Manual Bajaj Said Use 20w50 Oil) If I use Castrol Active 20w40 Is It Cause Damage Fro Engine??

        Or I Go For Bajaj DTSi 20w50 Oil?


        Please Help Me Friends.I Need Your Advise.


        If Anybody Lived In Kolkata Please Tell Me The Adress Or Store Name Where I Can Buy 20w50 4T Engine Oils(Castrol,Motul).If avalaible Then I Go To Kolkata.

        Thanks In Advance.

        Comment


        • 20W50 heats engine up pretty quickly. With 20W40 you will get low temp and very slight better performance.
          Yamaha Gladiator SS - Owned and Sold.
          Apache Hyperedge - May 2 - July 16

          Tiger in a Wolf's body = Apache RTR = Small Size - Amazing pickup.
          Beat that if you can.
          Yamaha SS 125 - August 17 - January 10, 2012
          Backed in it for my true love for Yamaha.
          Still best ride for me Apache RTR ( till 150cc )
          Apache Hyperedge - January 10, 2012 - Present
          Proud to be Highest Poster on Biggest Gaming Community of Bangladesh : Banglagamer - My profile
          My Facebook Page

          Comment


          • Originally posted by Sumondatta View Post
            20W50 heats engine up pretty quickly. With 20W40 you will get low temp and very slight better performance.
            Thanks Sumon Bhai.But In Bajaj Pulser 135 Manual Instructed For Using 20w50 Grade.

            Comment


            • Originally posted by Sumondatta View Post
              20W50 heats engine up pretty quickly. With 20W40 you will get low temp and very slight better performance.
              Nopes, Pinaki explained very well in other thread -

              Originally posted by Pinaki View Post
              Both 20w40 & 20w50 uses the same base oil , i.e 20weight . The 20w50 has just more viscosity modifiers added to it withstand loss of viscosity at higher temperatures , than the 20w40 .Viscosity modifiers does not lubricate or cool at all , that is done only by the base 20 weight oil , which would be same in both .You would not have any problems running 20w40 . Unless you operate that engine at very high temperatures and rpms for prolonged periods ( say days together continuously ) . Change it if it makes you feel better .


              Comment


              • Originally posted by shashi007 View Post
                Do i have to purchase it seperatly and give it to svc guyz ?
                I'm just a noob be cool on me bro and will it surely reduce (at least some) vibration
                Because i don't have any other problem in my bike 'm just annoyed with vibration only.
                Yes buddy, you have to buy it on your own. You can give it to svc guys or even local mechanic can do the job for 20 rupees.

                Originally posted by Soumen View Post
                Hi Guys I Have A Major Probs..Please Help Me...I Am From A Small Town(Midnapore) From West Midnapore.

                I Have Pulser 135 Ls.In Midbapore I Visit All the Oil Stores But I can Not Find Any 4T 20w50 Engine Oil.They All Have Car Engine Oil Like Castrol GTX.
                But Castrol Actve 20w40 Is Avalaible.

                Only 1 20w50 Oil Is Avalaible Here That Is Bajaj DTSi 10000 20w50.But I Read In This froum This Oil Is Not Good.Also I Used This Oil But Not Satisfied.

                So What Can I Do?...Go For Castrol 20w40 Oil(But In Manual Bajaj Said Use 20w50 Oil) If I use Castrol Active 20w40 Is It Cause Damage Fro Engine??

                Or I Go For Bajaj DTSi 20w50 Oil?


                Please Help Me Friends.I Need Your Advise.


                If Anybody Lived In Kolkata Please Tell Me The Adress Or Store Name Where I Can Buy 20w50 4T Engine Oils(Castrol,Motul).If avalaible Then I Go To Kolkata.

                Thanks In Advance.
                Please refer the engine oils thread for motul distributors in Kolkata/your area. For the moment stick to Bajaj dts-i oil, though it's not as good as Motul.
                Let's bring down the monster of corruption to it's knees.. please visit http://ipaidabribe.com/

                Comment


                • had a puncture so i took the bike to the mrf shop...firstly the mechanic goes iska tyre ka system alag hai..then scratches the alloy removing the black coating at places.. :'( then while putting it back on i find some extra wiser and a pin left out...man i hate this everytime somethin happens to the bike and i have to take it to the mechanic..it comes back more damaged. parts come off the bike but not all go back again....bajaj svc guys put a huge scratch on my fairing while it was given for servicing it causes me heartache every single time
                  Most motorcycle problems are caused by the nut that connects the handlebars to the saddle.

                  Comment


                  • Confusion

                    So Guys,

                    Heres the deal...
                    should i go for P135 or P150...
                    I am confused as there is not much of a price difference i think...??

                    Which bike has a much more comfort level for the pillion...as my mother and sister may also travel with me sometimes...
                    So i need to care for the pillion comfort also...
                    Last edited by trsakhilk; 06-02-2011, 01:08 PM.

                    Comment


                    • Originally posted by Sumondatta View Post
                      20W50 heats engine up pretty quickly. With 20W40 you will get low temp and very slight better performance.
                      My pulsar with 20w50 engine oil runs cooler than with 20w40 engine oil. The performance will reduce a bit when you use a 20w50 oil where 20w40 is recommended . The engine wont rev freely .

                      Comment


                      • Originally posted by Prabhakar150 View Post
                        My pulsar with 20w50 engine oil runs cooler than with 20w40 engine oil. The performance will reduce a bit when you use a 20w50 oil where 20w40 is recommended . The engine wont rev freely .
                        +1 to that.

                        20w50 would exhibit better cooling properties than 20w40 but the engine would not rev as freely as it would with 20w40. However, the difference will be minor.

                        If used during summers, 20w50 would perform better in terms of cooling but if used during winters, cold starting may be a problem and engine would rev less freely. 20w50 would feel smoother than 20w40 during any time of the year.

                        This is my personal experience. Experts please comment.
                        Signals which are timed for 50 Kmph are also timed for 100 Kmph :)

                        Comment


                        • Originally posted by trsakhilk View Post
                          So Guys,

                          Heres the deal...
                          should i go for P135 or P150...
                          I am confused as there is not much of a price difference i think...??

                          Which bike has a much more comfort level for the pillion...as my mother and sister may also travel with me sometimes...
                          So i need to care for the pillion comfort also...
                          The difference in price of P135 and P150 is about 9-10k. If you can extend your budget, always prefer P150. The pillion comfort would be much greater in the P150. Also, P150 is more relaxed in my opinion and more stable on highways and of course more powerful than P135.
                          Signals which are timed for 50 Kmph are also timed for 100 Kmph :)

                          Comment


                          • Originally posted by cmahajan View Post
                            The difference in price of P135 and P150 is about 9-10k. If you can extend your budget, always prefer P150. The pillion comfort would be much greater in the P150. Also, P150 is more relaxed in my opinion and more stable on highways and of course more powerful than P135.
                            +1, you should go for P150 if pillion comfort is important.
                            Let's bring down the monster of corruption to it's knees.. please visit http://ipaidabribe.com/

                            Comment


                            • @cmahajan Go for P150 for pillon pleasure and if you wanna treat yourself gor for P135

                              Comment


                              • Originally posted by suhail View Post
                                @cmahajan Go for P150 for pillon pleasure and if you wanna treat yourself gor for P135
                                Haha...I am not looking for a new bike right now but will keep that in mind!
                                Signals which are timed for 50 Kmph are also timed for 100 Kmph :)

                                Comment

                                Working...
                                X