White smoke from pulsar 150 (2015 model) please help!!!!

Engine not cranking

I have a pulsar 150 (2002) . From the past 1 week it has been giving problem in starting, the engine is not cranking. At first it used to start with 10-15 kicks , but today even aft r so many kicks it is not starting.

Re: Bajaj Pulsar 150 All Versions

Yeah bro that's y told u to do it with an experienced mechanic.

Re: Bajaj Pulsar 150 All Versions

I own my p150 (2015 model). The only thing that i am uncomfortable with is the footpegs... I wanna fix a reaeset footpegs like that of a p180. I dont have any idea whether i can do it or not. Is that possible? If yes.. then how? I wanna replace the footpegs along with brake lever and gear... Thanks in advance.

Re: Bajaj Pulsar 150 All Versions

well. so, for cleaning the carbon deposit inside the piston, it needs the complete dismantling of the engine, am i right?

Re: Bajaj Pulsar 150 All Versions

Ya tats for sure, the prblm may be due to only two reasons
1) carbon deposits or
2) carborator jet
As you told ur bike carb has been cleaned once so i suggested you with the first option.

Re: Bajaj Pulsar 150 All Versions

thanks for the response. but, are you sure its because of carbon deposit inside the piston? once, a mechanic told me it may be problem with carburetor but who knows. i think i need the bike to be examined by an experienced mech.

Re: Bajaj Pulsar 150 All Versions

Yeah i have experienced same thing on my friend's pulsar 2012 model, this may be due to carbon deposits on the piston. If that carbon is cleaned means you can feel the complete combustion of the petrol and so the power too. Do not try this without an experienced mechanic.

Oil leak in pulsar 150 exhaust

Hi friends, this is my first post to xbhp.
I have pulsar 150 UG4 2013 model with 25700 KM. All services done in authorized Bajaj service center at Bangalore. No outside work so far.
From past one week I am observing that oil is coming out of my silencer. Given to the service center where I used to give from day 1 in Bangalore.
There is no white\Black smoke coming from exhaust. Engine is fine. Last service done at 23400KM.

Here are the assumption made by the technicians at first sight.

1. Engine bore kit replacement needed
2. Silencer change is needed.


Since it ran only below 26000 KM I told there no chance of bore kit & silencer replacement since I have done all the services on time (4000-5000 KM).
They have checked the pulsar job code history and found that all the service were done in their center only.
Advised me to keep the bike there for 1 day. Morning they will check whether any white smoke coming out while starting.
I went back on second day and they have told like there is no issue with the piston. Engine oil is fine. No smoke is coming while starting.
Gave me the explanation that probably children/somebody have put some oil from backside to the exhaust.
I have asked is there any issue with piston ring? They told no issues are there.
I am not satisfied with the response so far. Anybody have experienced this kind of oil leak in past.
Please suggest the path forward

Re: Bajaj Pulsar 150 All Versions

somebody please reply

Re: Bajaj Pulsar 150 All Versions

Guys anyone tried Castrol power 1 15w40 , please share your experience with this one like how this works on.

Re: Bajaj Pulsar 150 All Versions

My pulsar 150 (2007 model) giving minor throttle missing while riding in relatively high speed. It is not recognizable in low speed . I went to the mechanic but he was unable to detect this when he rode my bike, but i am sure the problem is there. I have recently cleaned carburetor as well as the gas tank. So what could be the culprit ??? expecting quick response.

Re: pulsar 150 ug3 over race problem

I think this may be a problem with clutch plates, because as you mentioned, "it overraces during clutching" and a wrong arranged engine!

This is just my knowledge, as I'm an engineering student, still in the learning process.

Re: pulsar 150 ug3 over race problem

the engine head got busted ..it was completely destroyed.. after that the mechanic fix it and any necessary changes..but after that it starts overracing.. when it's on neutral the rpm is good.after when i ht the gear and pull the clutch it starts overracing and after some time it came at easy rpms.. and while riding when i pull the clutch for change gear.... Again it starts overracing in running

Re: Bajaj Pulsar 150 All Versions

I have purchased my pulsar 150 2016 model, since from the second service, I'm feeling something bad related to its engine.
While accelerating, it gives noise(kat kat), i have been to service centre for about 10+ times. Finally they said that, a new scissor gear is installed and the sound will gradually decreases.
But still some sort of( same) sound is coming while accelerating. Its like some gears are not adjusted.

Few local mechanics said, a reboring process will fix the sound, but I'm not in a mood to go for local service centres, and how can a new bike gives bore problem.
What might be the problem here can anyone help me out ! Plz.