Announcement

**sixspeedtwin** · 12-30-2011, 09:36 PM

Originally posted by SriramEfunds View Post

Red color old stock is hard to find. Even if, matching shade of side shields is another challenge.

I have the old RX100 wall clock for color matching ....

**kb100** · 12-30-2011, 10:30 PM

Originally posted by sixspeedtwin View Post

When u get a new chassis from the shop, it is unstamped.

The chassis needs to be stamped in front of the RTO officials.

There is a lengthy procedure for this ... do not buy a chassis unless the seller is willing to give u a proper bill or declaration for it ...

if the mech has the punches then it can be done without any hassles , though nowadays a note from rto must be produced for the dealer to punch the no,

**SriramEfunds** · 12-30-2011, 11:55 PM

I never faced any hassle for RX135 restoration, bought frame with bill, took it to authorized shop directed by YASS. Job was done in about 5 mins.
Here, it is done without much hassle, however, would advise each to procure the frame with bill. Ultimately, when FC is done, no matter what, RTO signs the paperwork only if there is a motivation.

**karthikdattag** · 01-02-2012, 04:11 PM

Originally posted by satishg View Post

your existing chassis no. can be stamped on the new chassis without any issues, the dealer will do it for you

no petrol tank

Existing chasis number can also be stamped on a existing (used) chasis, without any complications.

Originally posted by sixspeedtwin View Post

The chassis needs to be stamped in front of the RTO officials.

There is a lengthy procedure for this ... do not buy a chassis unless the seller is willing to give u a proper bill or declaration for it ...

This is rubbish. Sorry alok, but different cities can't have different rules. You just can't scare people like this.

There is no requirement of stamping the chasis number in front of RTO officials!!!!!!!! I have never heard of any such rule. I have restored plenty of RX135s & RX-Z & cops nor RTO has any issues with it.

And FYI, no bill is required either.

Originally posted by SriramEfunds View Post

I never faced any hassle for RX135 restoration, bought frame with bill, took it to authorized shop directed by YASS. Job was done in about 5 mins.
Here, it is done without much hassle, however, would advise each to procure the frame with bill. Ultimately, when FC is done, no matter what, RTO signs the paperwork only if there is a motivation.

+ 100. There is no need for anyone to worry.

Trust me Sanjith, if you want to change the chasis of your RX, for whatever reason, you are free to do it & nobody can do anything about it. All this provided new chasis is available. I have people here who have converted regular RX135 to RX-Z with new Chasis. I can give many many such references & this is not illegal!!!!!! Yes running two bikes with similar chasis number & registration number is illegal, but we are talking a single machine here!!!!!!!!

**sanjithjoseph** · 01-03-2012, 05:26 PM

Originally posted by sixspeedtwin View Post

When u get a new chassis from the shop, it is unstamped.

The chassis needs to be stamped in front of the RTO officials.

There is a lengthy procedure for this ... do not buy a chassis unless the seller is willing to give u a proper bill or declaration for it ...

Originally posted by kb100 View Post

if the mech has the punches then it can be done without any hassles , though nowadays a note from rto must be produced for the dealer to punch the no,

Originally posted by SriramEfunds View Post

I never faced any hassle for RX135 restoration, bought frame with bill, took it to authorized shop directed by YASS. Job was done in about 5 mins.
Here, it is done without much hassle, however, would advise each to procure the frame with bill. Ultimately, when FC is done, no matter what, RTO signs the paperwork only if there is a motivation.

Originally posted by karthikdattag View Post

Existing chasis number can also be stamped on a existing (used) chasis, without any complications.

This is rubbish. Sorry alok, but different cities can't have different rules. You just can't scare people like this.

There is no requirement of stamping the chasis number in front of RTO officials!!!!!!!! I have never heard of any such rule. I have restored plenty of RX135s & RX-Z & cops nor RTO has any issues with it.

And FYI, no bill is required either.

+ 100. There is no need for anyone to worry.

Trust me Sanjith, if you want to change the chasis of your RX, for whatever reason, you are free to do it & nobody can do anything about it. All this provided new chasis is available. I have people here who have converted regular RX135 to RX-Z with new Chasis. I can give many many such references & this is not illegal!!!!!! Yes running two bikes with similar chasis number & registration number is illegal, but we are talking a single machine here!!!!!!!!

Thankyou All..

From all what you people have said I think if we are going to follow each and every rules we are going to have loads of headaches. Else if it can be done with the help of a local mechanic with perfection there wont be any problem.

**sanjithjoseph** · 01-03-2012, 05:38 PM

Originally posted by sixspeedtwin View Post

I have the old RX100 wall clock for color matching ....

YESSSS....that clock is already there in my wishlist..

Willing to sell?

hehehe

**sanjithjoseph** · 01-04-2012, 12:25 AM

Found few pcs of Minda steel key set (Yamaha packing) in a shop...

I'm going to get them all tomorrow. Will post the snaps tomorrow.

**SriramEfunds** · 01-04-2012, 12:32 AM

Originally posted by sanjithjoseph View Post

Found few pcs of Minda steel key set (Yamaha packing) in a shop...

I'm going to get them all tomorrow. Will post the snaps tomorrow.

Why bold?

Check for the Mfg date. I've seen few shops in south TN where the steel keys are sold. The Minda stamp on the keys were dicy and it had recent year as mfg date.
Seniors may give input from their experience from the past.

**sanjithjoseph** · 01-04-2012, 01:05 AM

Originally posted by SriramEfunds View Post

Why bold?

Check for the Mfg date. I've seen few shops in south TN where the steel keys are sold. The Minda stamp on the keys were dicy and it had recent year as mfg date.
Seniors may give input from their experience from the past.

Yes bold because,its the part which I was searching for the last few months.

Yes me checked the mfg date and it is 10/11/2011..little bit confused.
But it looks good and perfect with green verified sticker of MINDA.

They told me, these steel key sets are circulated in Delhi only now and very few packs are released. This shop people promised me 3 r 4 months before that they will try to get MINDA steel keys from Delhi for me.

I'm expecting reply from other experts too here on this...

**SriramEfunds** · 01-04-2012, 02:00 AM

Originally posted by sanjithjoseph View Post

Yes me checked the mfg date and it is 10/11/2011..little bit confused.But it looks good and perfect with green verified sticker of MINDA.

If possible take a pic and post it.

**yamdoot** · 01-04-2012, 02:22 AM

Originally posted by SriramEfunds View Post

If possible take a pic and post it.

+1 and if the quality look perfect, buy it.

**rxfan** · 01-04-2012, 11:34 AM

Originally posted by sanjithjoseph View Post

Found few pcs of Minda steel key set (Yamaha packing) in a shop...

I'm going to get them all tomorrow. Will post the snaps tomorrow.

Yes Sanjith the steel key is available like the old escorts one but the packing is mostly carrying the date of 2010..

**sanjithjoseph** · 01-04-2012, 11:54 AM

Originally posted by rxfan View Post

Yes Sanjith the steel key is available like the old escorts one but the packing is mostly carrying the date of 2010..

Is it in Yamaha packing and keys from MINDA? You got any info like they are genuine or not?

whats the price there?

**rxfan** · 01-04-2012, 12:12 PM

Originally posted by sanjithjoseph View Post

Is it in Yamaha packing and keys from MINDA? You got any info like they are genuine or not?

whats the price there?

ya got it checked from the oldest yammi mechanic here ..he says these are the OEM ones..you can get it for Rs. 450/- here .tho i will reconfirm

yes it is in yamaha packing with Yamaha logo on the key and small Minda logo a little below...

**sanjithjoseph** · 01-04-2012, 12:23 PM

Originally posted by rxfan View Post

ya got it checked from the oldest yammi mechanic here ..he says these are the OEM ones..you can get it for Rs. 450/- here .tho i will reconfirm

yes it is in yamaha packing with Yamaha logo on the key and small Minda logo a little below...

mmm Yes, Written 'YAMAHA' on one side and 'MINDA' on other side with green MINDA sticker on the main set.

Last time some 6 months back when I bought steel key set for another Xbhpian the price was Rs.504/-. That time I was not knowing steel keys are rare.

.
In the packing which I saw yesterday the mfg date is 10/11/2011 and price Rs 390/-

Anyway I will upload the snaps this evening.

Announcement

The very Old RX100 (1986, Japan)

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment