Spare parts thread 2 strokes Yamaha RX family

[jd666]

^^ and a solution to do that is to oversize the bore?? or is there any other way?

[NitinGirish]

ah!!! This exactly what I was talking about in Bluevolt's thread. There is an interesting thread on this on RDD. SunnyMysore has posted pics there too and the piston...what shall I say

Original Japnese bore apparently can be bought for Rs.15k. the 4YA one.

[jd666]

^^ whats the verdict on that one??

[psycho 98]

ah!!! This exactly what I was talking about in Bluevolt's thread. There is an interesting thread on this on RDD. SunnyMysore has posted pics there too and the piston...what shall I say

Original Japnese bore apparently can be bought for Rs.15k. the 4YA one.

You dont need 15k u can get it for still less minus 2k from it, sun mysore is sunnyboi on the forum.

^^ and a solution to do that is to oversize the bore?? or is there any other way?

Not exactly rebore is not the solution, you need to close those blow holes with epoxy and u need to chamfer the ports and transfers this is the toughest job to do a highly skilled proffesionall tuner is needed for this job. i would say pick that professionall and get it done.

[aalop143]

looking for a 28mm atleast, with suitable jets, please let me know.

the 28 mm mikuni carb price is 2800 +delivery charges, and the ymc flat side power jet double petrol supply 30mm 4800+delivery charges

[jd666]

Thanks for the info, what jets do the both run??

[NitinGirish]

^^ whats the verdict on that one??

Good. Thats what I gathered from that thread. 3YA (?) the Indonesian one can be had for Rs.5k and it is apparently difficult to distinguish looks-wise but world of difference in performance.

Will post a link here tomo as its stored in 'favourrites' in my office sys. Searching now is a pain

EDIT: Here it is. Need to register though to be ableto view it. http://www.rddreams.com/forum/viewto...63&hilit=japan

You dont need 15k u can get it for still less minus 2k from it, sun mysore is sunnyboi on the forum.



Not exactly rebore is not the solution, you need to close those blow holes with epoxy and u need to chamfer the ports and transfers this is the toughest job to do a highly skilled proffesionall tuner is needed for this job. i would say pick that professionall and get it done.

Pradeep sahebre, can you post a rough estimate, how much would it cost to re-build 135 to RXK with the cylinder under discussion. Everything put together I mean. 4YA cylinder kit, matching crank+gearbox+clutch+carb and the works.

[jd666]

I know the following is something that a number of you have been waiting for -

Got a quote for all the special tools needed for RX100, this is the list of tools. This workshop is a OEM supplier to all dealerships, authorised service centres etc.

1 YSST 201 MAGNETO HOLDER
2 YSST 202 MAGNETO PULLER
3 YSST 205 DRG. SPL. ROCKET HOLDER
4 YSST 207 PISTON PIN REP
5 YSST 210 RING COMPRESSOR
6 YSST 213 F F BOTTOM NUT HOLDER
7 YSST 214 F.F. TOP NUT SPANNER
8 YSST 221 F.F. SILENCE NUT
9 YSST 222 PUNCH SEAL C. SHAFT
10 YSST 224 PUNCH GEAR SHAFT
11 YSST 233 CL. HUB HOLDER
12 YSST 237 SP. O. METRE NUT
13 YSST 264 GUAGE F.F. TUBE
14 YSST 265 C. CASE SPLITTING
15 YSST 266 C. SHAFT INSTALLER
16 YSST 270 F.F. SEAL REMOVER
17 YSST 275 F.F. SEAL INSTALLER
18 YSST 502 MAGNETO PULLER
19 YSST 507 P. PIN REPLACER
20 YSST 510 RING COMPRESSOR
21 YSST 605 D. G. SPKT. HOLDER


These are all the tools listed in the list given to me. Total package is 3.5k plus shipping as per actuals. I think this will work for RX135s as well.

let me know if anyone interested. Ill see if we can get a discount if there are multiple orders, then we can club em together. what say guys??

[SriramEfunds]

Great info JD...

[jd666]

^^ thanks.. the dream is to have the house garage my own, and have shiny expensive tools hanging from the walls... and those hydraulic tables to mount your bike on, and work at waist level.. man thats the dream.. wont mind a jukebox and a fridge with cold drinks ( dont like beer ) stocked up!!. Aah... thats the life..

[rohitsapru]

I know the following is something that a number of you have been waiting for -

Got a quote for all the special tools needed for RX100, this is the list of tools. This workshop is a OEM supplier to all dealerships, authorised service centres etc.

These are all the tools listed in the list given to me. Total package is 3.5k plus shipping as per actuals. I think this will work for RX135s as well.

let me know if anyone interested. Ill see if we can get a discount if there are multiple orders, then we can club em together. what say guys??

Hi JD this is great stuff! I too am looking for some essential tools to start wrenching on my RX100. To begin with, tools required to work on the electricals, cycle parts, engine top end. Count me in, I will send you a PM.

[sheelpriye]

i would like to know that despite RX-135 series(RX-G/Z/4S/5S) making more power than RX-100, why is the 100 preferred more than 135cc's?

yup, this is the trend over here

[SriramEfunds]

^
Widely recognized.
Exhaust note.

This is all I could think of.

[aargee]

i would like to know that despite RX-135 series(RX-G/Z/4S/5S) making more power than RX-100, why is the 100 preferred more than 135cc's?

yup, this is the trend over here

Simple - The engine of RX100 is more refined & gives a smooth power. Sprocketing of RX100 is different giving quick acceleration; last but not the least, the legendary sound of RX.

[codezero]

Simple - The engine of RX100 is more refined & gives a smooth power.

if RX100 is more Refined why are you setting out to Rebuild a RX135 (engine Wise),you must be building a Stock RX 100. care to Explain ?

wat you have said in the thread & wat you have said here :

http://www.xbhp.com/talkies/thumpers-two-stroke-exotics/11324-rx-rebuild-using-3-yamaha-variants-27.html#post431152

is Very Contradicting Indeed,you want the Cake & want to Eat it too

RX135 is the King of 2 Strokes in india & will remain the boss,RX100 is just a over hyped bike that is the fact not bothered if people accept it or not

your rebuild seems to be like:

* Paratha for Break fast (RX 100 body)
* sambar rice for Lunch (Cylinder Assy + Crankshaft Assy of RX135 4 Speed)
* pizza & pasta for dinner (Gearbox of RX135 5 Speed)

End Result is Indigestion which will leave you sick for Ever

it seems to a Jack of all & master off none rebuild hope your bike does not suffer from indigestion