Tweet
Originally posted by shv18
View Post
-
Yup, I did. Was thinking about it and got the idea how about changing the filter instead of playing with carburettor settings -
Bro,Originally posted by jkhan69 View Post
you cannot run lean when you are climbing the mountains.. your bike will be at all the time at high gears and you will end up damaging your bike. Rather keep the air filter stock and get the AFR tuned in the shop mentioned by vishwas sir. the altitude at which the airsickness of bikes starts is clearly mentioned in Vishwas sir's blog. for FI bikes it is not much of a problem as the ECU automatically sets the AFR based on altitude.
CheersA quote by a toilet, " use me well, keep me clean, i would never tell anybody whatever i have seen.." :PComment
-
cmon guyz i really need helpOriginally posted by rameshrana03 View PostHEY GUYS
I have a 3month old FZ16. had an accident on the 12th day of the new bike(fractured ring fingure)
.been a while now.
but i'm facing problem that my bike mostly does not start with self start in morning.
if anyone can tell the battery problem i will be thankful...
and i broke the handle lock
then i got an old lock installed on handlebar only.
so now i have two keys.one for handlebar and the other one(original) for seat and tank.
what should i do now???...
what do u suggest.
whats the price of new lock assembly..can i get a new lock for handle bar only..what will be the price then???
suggestions...cost...help pleaseBELIE\/E IN DE$TINYComment
-
I feel the same too.. Anyway I can verify if i again need a cone set replacement ??Originally posted by shv18 View Post
PS: Why did you specifically mention checking rear shocks.. AFAIK, but ofcourse the rear shocks health adds to stability & handling of bike but does it anyway relate directly to loose unstable handlebars feeling as i'm experiencing??
That could be very well the reason.. But my mech said the bearings are replaced everytime cone set is changed..Originally posted by nand15 View Post
Ever heard of loose handling of the handlebars due to over-greasing of bearings??
Please do so, i'm bound for oil replacement soon.. few hundred kms to goOriginally posted by shv18 View PostComment
-
Going for the jet trials tomorrow. hopefully, we zero in on a good jet size.
K&N+bigger jet=0.5 bhp approx. for an overall cost of 1800/- seems a bargain. Does anyone here have any idea about these cheap end-cans that sell for 2k?? are they even properly engineered with resonance in mind?? With a proper FFE and rightly tuned K&N, our bikes are real apache killers.
not that, i promote streetracing. But hey, who wouldn't want to win traffic light gp's.
Never ride faster than your guardian angel can flyComment
-
frankly speaking does it matter you have to use separate keys for the locks?Originally posted by rameshrana03 View Post
as per the starting trouble in the morning,always use a choke when starting for the first time in the morning. especially during the winters, and cold mornings....Timon: Orange Yamaha FZ16 2009
Optimus: Red Mahindra XUV500 W8 FWD 2013
Atom: Red Tata Nano XTA 2016
Pumba: Red Harley Street 750Comment
-
Hey guys,
I want to share with you an incident that took place today.I know full well that street racing is illegal,I am also aware of the speed limit and I also know that street racing is dangerous,But sometimes you cant resist yourself,the adrenaline overtakes your sense.I am sure many you guys would agree with me.
It was an afternoon,and there was thin traffic on Bannerghatta road(Bangalore)
As I was riding,an aggressive driving Apache RTR 160(FI I think)guy overtook me and stopped at the signal. So there began my urge to whoop this guy.
So as soon as the signal became green,I throttled hard,the RTR guy did the same,soon we were neck to neck(But in my head I was devastated,I had got my bike 'Joeled'(180cc bigbore+filter ,But I couldn't overtake the Apache guy!.)
BUT then to my shock and surprise I realized,My friend was sitting as PILLION
and holding on for his dear life!,and here I was trying to whoop an apache 160 (And almost did it,If I dint have to take a left at the next junction)!.So as they say-NEXT LEVEL PERFORMANCE
REVVADDICT
-Yamaha FZ-16 (2010-12)
-Kawasaki Ninja 250R (2012-13)
-KTM Duke 390(2013- )Comment
-
Can any one tell me the cost of the front shock absorbers for fzs?
Comment
-
Street racing an absolute no no buddy.... if get the urge to do it sometimes then do so with proper riding gear.. if you upgrade to FFE as next stage the bump in power is quite visible and linear... highly recommended from my end!!Originally posted by vijeth v View PostHey guys,
I want to share with you an incident that took place today.I know full well that street racing is illegal,I am also aware of the speed limit and I also know that street racing is dangerous,But sometimes you cant resist yourself,the adrenaline overtakes your sense.I am sure many you guys would agree with me.
It was an afternoon,and there was thin traffic on Bannerghatta road(Bangalore)
As I was riding,an aggressive driving Apache RTR 160(FI I think)guy overtook me and stopped at the signal. So there began my urge to whoop this guy.
So as soon as the signal became green,I throttled hard,the RTR guy did the same,soon we were neck to neck(But in my head I was devastated,I had got my bike 'Joeled'(180cc bigbore+filter ,But I couldn't overtake the Apache guy!.)
BUT then to my shock and surprise I realized,My friend was sitting as PILLION and holding on for his dear life!,and here I was trying to whoop an apache 160 (And almost did it,If I dint have to take a left at the next junction)!.So as they say-NEXT LEVEL PERFORMANCE
CheersA quote by a toilet, " use me well, keep me clean, i would never tell anybody whatever i have seen.." :PComment
-
Traffic light GP's make up a lot of our coffee table discussionsOriginally posted by shv18 View Post ... But Yes i completely agree , street racing is an absolute no no , especially on our streets ...
People ask me , why are you cribbing about the BHP ? to them I say "MORE is never ENOUGH" xbhp.com
FZ16 headlight assembly with projector and angel eye for sale .
My first ever trip log ... http://www.xbhp.com/talkies/tourer/1...gh-clouds.htmlComment
-
Any one know the price of the forks? i need to know asap.Comment
-
Yamaha Parts Price List - 2010: Yamaha OEM Parts Price List ... part no 21cf3100100 ... going by that , it looks like it's gonna cost 6K upward ...Originally posted by r4z0rs-edge View Post
P.S : Guys this is what my rear tyre has developed after 19.6K kms ... the 5 pics are not of the same crack but 5 different ones occuring one after the other on the grooves ... and it is only on the right circumference .
Last edited by nand15; 12-10-2011, 01:12 PM.People ask me , why are you cribbing about the BHP ? to them I say "MORE is never ENOUGH" xbhp.com
FZ16 headlight assembly with projector and angel eye for sale .
My first ever trip log ... http://www.xbhp.com/talkies/tourer/1...gh-clouds.htmlComment
-
Had ANYONE ever Downloaded the price list?Originally posted by nand15 View Post
If yes PLEASE let me know!
thank youSmoke rubber,not tobacco.
-Life Through-the-Lens
-For HELLA/VALEO [BMW/AUDI/FORD/LINCOLN/SKODA],P220,Aftermarket Projectors,pls contact me!Comment
-
Very Simple.Go to the MRF office and get a R/P under warranty!Originally posted by nand15 View Post
P.S : Guys this is what my rear tyre has developed after 19.6K kms ... the 5 pics are not of the same crack but 5 different ones occuring one after the other on the grooves ... and it is only on the right circumference .
They will check the wear and quote a price.I got mine R/P for a brand new one for 1400RS
I has also done 19K kms and had slight cracks bet. all the threads.Smoke rubber,not tobacco.
-Life Through-the-Lens
-For HELLA/VALEO [BMW/AUDI/FORD/LINCOLN/SKODA],P220,Aftermarket Projectors,pls contact me!Comment
-
The part which the mud guard screw goes in has been broken due to a accident, anyway to fix that without changing the forks? only the one marked in the pic has broken,Comment
Comment