Re: Yamaha FZ16 version 2.0

. Regarding that sound am not sure either. You can try som other authorized service center

2. No problem with air pressure. If there is then ur ride would be bumpy.. For hot climate like chennai it might be a problem but for banglore it must not be a big deal.

3. Always take to an authorized service center thats it..!

4. Yes the sound increases with age its normal.

5. This is my first FI bike so am not the right person to advise. But you can consider the point mentioned by devils_friend. Dont let the fuel dry up before u fill in again.

Sent from my D6503 using xBhp Connect mobile app

Re: Yamaha FZ16 version 2.0

Thanks for your reply. Will keep in mind all the points. I just had the issue of some clicking sound. Dont know if i can upload a sound clip in here. THis happens only during engine heating up.
About the engine oil i will specificaly tell the service People for the same. one more issue i missed out. At 70 kms and above i feel front wheel bit shaking. There are too much going on while driving. I think i should think less. BUt i am taking over care for the bike. As its my 1st from salary

Re: Yamaha FZ16 version 2.0

Regarding engine oil its is recommended to use yamalube..

Sent from my D6503 using xBhp Connect mobile app

Re: Yamaha FZ16 version 2.0

clicking sound comes preety much in all bikes from re to cbr...it comes in mine aswell but wearing a helmet reduces it...and try to record the if u really think it s that loud ..for camparison fz sounds nothing compared to my previous pulsar.....front being shaky man that is low kerb weight 132 kg and its a naked...relax budds...

----consecutive posts auto-merged-----

anybody did something about exhaust note it is too silent.....removed snorkel or anything.???????

Re: Yamaha FZ16 version 2.0

Colour changing of bike is illegal?????!

Sent from my GT-N7100 using Tapatalk

Re: Yamaha FZ16 version 2.0

Change of color has to be notified to the RTO and same mentioned in the RC also.

Re: Yamaha FZ16 version 2.0

Hello Guys, I am new to XBHP. I am planning on buying my 1st Bike. Need your suggestions and Opinions on the same. Is FZ version 2.0 good bike for 1st timers. What are the common issues with this bike. After Run-in period is FZ version 2.0 a maintainance free bike (With Normal servicing). Please do post your comments, suggestions and opinions on the same. Thank you!

Re: Yamaha FZ16 version 2.0

Good
Handle
Better performance
Good milage (45-50)
Smooth engine no vibration like r15
Fuelinjuction
Bad
Power is only 13.1ps(not affect in performance)


Sent from my GT-N7100 using Tapatalk

Engine swap for fzfi

Hi all,

Now this may sound crazy but just a thought.

I hav come across with a 250cc engine swap on a yamaha fz16 version1. Now that the version 2(fzfi) being a fuel injected bike, and there are a lot of performance bikes which are fuel injected, if i would try and swap my engine, what are the things i should consider for the search of a new engine. Preferably of a higher cc say 250 or 300cc.

PS: I had bought an FzFi 4 months back and i feel that the bike can handle more power than what is available.. I have researched about changing the sproket to attain better accleration while i give up some top end and vise versa. Looking for some insight on the engine swap idea.

Sent from my D6503 using xBhp Connect mobile app

Re: Yamaha FZ16 version 2.0

Hi all,
My bike going for first service at 1000km in 20 days ,,,Its been a pleaserable experience till now with buttery smooth engine and very supliant ride and killer looks . i belongs to much smaller city and here these types of bikes are very rare seen .So always i get looks , ,, all things going good and very satisfied with this . Earlier thought for Gixxer but no service center here and not much confident on it since it was new in the market.

I calculated bike average on tank fill method and for my suprise ,, this bike constantly giving me 51 Kmpl,,, yes its 51 Kmpl,, i expected it to be 45. Tyres are really good in performance and looks appeal to. Tyres are now ' Rev Z ' which are hard compoud then earlier ones. As i told i am from much smaller city and fellow riders here looks as Alien bike. When I park it in between Commuters ,they all look childish in front of this. Sometimes i have to go offroad too,, some routine village trips and i can say its more comfortable than Pulsar and pillion comfort is good too though lilltle bit hard seats .
Ride quality is simply awesome and when coupled with buttery smooth engine ,, this is all joy to ride and it seems worth for every penny spend on it .

Please tell me what to look for First service like what will have to change or applied

Re: Yamaha FZ16 version 2.0

Hi guys,

Since this is the ownership thread, I thought this will be right place to put my question. I recently broke my rear Fender(rear wheel huger) - It came out in 4 pieces. I want now to go with V1's fender. I've seen some posts on this thread too about the same. I asked the service center guys to do it but they said it would be an alteration and hence they can't do it. Please suggest me a workshop in Bangalore which can do the same by not damaging the bike. Any place near Marathahalli will be easier for me to reach but even if not so, it's fine. AND YES - PROUD TO OWN THIS MACHINE.

Thanks

Re: Yamaha FZ16 version 2.0

In that post it says its a direct fit and no modification was done..!!

Sent from my D6503 using xBhp Connect mobile app

Re: Yamaha FZ16 version 2.0

Hi everyone!!
Is there any possibility of fitting saree guard?

Sent from my GT-I9100 using xBhp Connect mobile app

Re: Yamaha FZ16 version 2.0

I think you wont need one. As everything is cover and the rear tyre hugger does the job.

----consecutive posts auto-merged-----

Low fuel ? can you please help me with this as the reserve is 2.4litres.

Also the clicking sound i felt was from engine and not chain. I have asked service person for tapper check but that is not the issue.

EVen the engine sound has increased which i feel is not as it was even after the 1st service.

Re: Yamaha FZ16 version 2.0

The engine sound increases yes.. Even i feel that.. Initially the sound was so silent but now the sound is audible even after wearing my helmet.

Regarding the clicking sound, do u hear the clicking sound even if u stop revving..?? If yes hold the clutch(while riding) and let the rpm reduce.. If u still hear the sound then it is not from the engine..

Sent from my D6503 using xBhp Connect mobile app