-
"Live as if you were to die tomorrow. Learn as if you were to live forever" -
Re: Honda Unicorn Dazzler
[MENTION=51254]manas34[/MENTION] hav uploaded picture again
youtube link: https://www.youtube.com/channel/UCB1...ZF550FWAzfYRlwComment
-
Re: Honda Unicorn Dazzler
The encircled portion is the port where the secondary air injection is connected. It is connected to the exhaust port. Your mechanic covered that because on starting the engine with that port on your bike will push the exhaust through it and thus he blocked it. By blocking it he stopped the exhaust gas escaping and thus he deadened the sound and thus your engine sounded smooth.Originally posted by neil9381 View Post[ATTACH=CONFIG]126771[/ATTACH]Hello everyone I was hearing clicking and hissing sort of noise(pulsating) from the engine as suggested by @sibun I got the tappet adjusted and now the engine sounds like when I got the bike
I was watching the mechanic doing the adjustment I noticed he blocked the encircled portion with a cloth for a second or two..and the engine sounded very silent I dont know the purpose of the encircled portion(see picture) Changes observed after the tappet adjustment bike feels smooth and better acceleration @sibun can you tell me what that encircled portion others too please answer and let me learn more Photo of my joy- http://www.xbhp.com/talkies/854067-post963.html-3.88 lac km cont....Ownership review of my joy- http://www.xbhp.com/talkies/832255-post608.html- slowly updating as and when getting time. HERO HONDA CBZ EXTREME(2011) - 47K KM AND COUNTINGhttp://www.xbhp.com/talkies/motorcyc...tml#post904152-carb tuning guideComment
-
Re: Honda Unicorn Dazzler
Hello everyone,
I always wanted to change our dazzler's riding position to a slightly sportier one. For this I have already replaced the stock handle bar with the hh hunk's handle bar as it is slightly shorter than the dazzler. It was a direct fit which didn't required any special modifications.
Now I need to change the stock foot peg position to rear sets one. For this which one's should I go for - hh hunks or karizma zma rear set foot pegs?(complete assembly viz brake/gear shifter lever etc). Will it be a direct fit? or else what modifications I need to do?Comment
-
Re: Honda Unicorn Dazzler
any second hand / used, Honda Unicorn Carburetor for sale ???HH Karizma (CURRENT)
HH CBZ XTREME (2007-2014)
HH CBZ 2000 (STILL HAVE)Comment
-
Re: Honda Unicorn Dazzler
I rode it to 131kmph
Sent from my GT-I9300 using xBhp Connect mobile appnot a hard racer, but love to drive.
fully DIY type GuyComment
-
Re: Honda Unicorn Dazzler
131Kmph??? at what rpm
nvr heard that dazzler could achieve this speed
Originally posted by vjxm View Post
youtube link: https://www.youtube.com/channel/UCB1...ZF550FWAzfYRlwComment
-
Re: Honda Unicorn Dazzler
Reaallly?? i got 133Originally posted by neil9381 View Post
Sent from my HTC One using TapatalkComment
-
Re: Honda Unicorn Dazzler
##Originally posted by Mohammed shareef View Post
I have modified my dazzler's chain cover & rear mud guard . It helps me to keep clean mono shock & chain from water drop from rear tyre in rains.
As u can see in pics.
Sent from my GT-I9300 using xBhp Connect mobile appAttached Filesnot a hard racer, but love to drive.
fully DIY type GuyComment
-
-
Re: Honda Unicorn Dazzler
A piece of tube used here to protect mono shock from mud.Originally posted by vjxm View Post
Sent from my GT-I9300 using xBhp Connect mobile appAttached Filesnot a hard racer, but love to drive.
fully DIY type GuyComment
-
-
Re: Honda Unicorn Dazzler
Originally posted by neil9381 View PostOriginally posted by phat_17 View PostReaallly?? i got 133
Sent from my HTC One using Tapatalk
I have done 134 @ 9800 rpm 5th gear (speedo indicated) after which it hits the rev limiter, so this is the max speed which dazzler can do in stock condition.
----consecutive posts auto-merged-----
Any inputs on this?Originally posted by amitmalve View PostHello everyone,
I always wanted to change our dazzler's riding position to a slightly sportier one. For this I have already replaced the stock handle bar with the hh hunk's handle bar as it is slightly shorter than the dazzler. It was a direct fit which didn't required any special modifications.
Now I need to change the stock foot peg position to rear sets one. For this which one's should I go for - hh hunks or karizma zma rear set foot pegs?(complete assembly viz brake/gear shifter lever etc). Will it be a direct fit? or else what modifications I need to do?Comment
-
Re: Honda Unicorn Dazzler
[MENTION=31946]amitmalve[/MENTION]
no idea about your query
youtube link: https://www.youtube.com/channel/UCB1...ZF550FWAzfYRlwComment
-
Re: Honda Unicorn Dazzler
I have done this jugaad and its worrking wonders for me.
Sent from my GT-S6102 using Tapatalk 2Attached FilesComment
-
-
Re: Honda Unicorn Dazzler
Mast jugaad hai yaarOriginally posted by lineinfire View PostI have done this jugaad and its worrking wonders for me.
Sent from my GT-S6102 using Tapatalk 2
sent from SGS3 by vjxmnot a hard racer, but love to drive.
fully DIY type GuyComment
-
Re: Honda Unicorn Dazzler
I have a problem with my dazzler.
It have idle rpm of 1200 when engine is hot .when I leave it in neutral gear for some 10-15 seconds, it tends to stop the engine as idling goes down to 700-800 rpm.when I throttle it again it settle at around 1200 rpm but after some moment it goes again to die.its behave only when its sufficient hot .not in cold condition.
sent from SGS3 by vjxmnot a hard racer, but love to drive.
fully DIY type GuyComment
Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us
Red to green – let the cager go first.
Our Partner
Tweet
Comment