Spare parts thread 2 strokes Yamaha RX family

[classiclover]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello buddy,in a way your mechanic is saying true getting that side lock again welded to a frame is quite a difficult task, first you have to grind that hole properly and then find a discarded frame, then again cutting that side lock from that frame and welding it on to your existing frame,and even if you find a frame there is no gurantee that it can be done properly, but still you can give it a go, for frame you can check at the scrap market, the seat matter is not that big you can purchase new seat from the ASC, oe crash guard is still available, even protector footrest(sareeguard) is also available, speedometer is available.

Thanks Kusmaker. I spoke to another seasoned mech who knows a chap who could just pull it off. Yet to see how they would though. Will keep this thread posted. I'll keep the information on the OE parts when I go again to pick up the chain cover on Tuesday.

Hi Classiclover, Have you ordered all the stuffs from bangalore wheels? I had seen few people buy bore kits there, I enquired and they said it would cost 8500 be it a 4speed or 5speed RX.
Thanks,
Bharath

Hi Bharat. All the stuff that I bought were from Bangalore wheels. Haven't checked about the bore kits though. Will check and update soon. I wasn't very happy with a few spares though. Especially the tank lid that I bought. It has a strange sticker!

[baruc2003]

Re: Spare parts thread 2 strokes Yamaha RX family

Thanks Kusmaker. I spoke to another seasoned mech who knows a chap who could just pull it off. Yet to see how they would though. Will keep this thread posted. I'll keep the information on the OE parts when I go again to pick up the chain cover on Tuesday.



Hi Bharat. All the stuff that I bought were from Bangalore wheels. Haven't checked about the bore kits though. Will check and update soon. I wasn't very happy with a few spares though. Especially the tank lid that I bought. It has a strange sticker!

[ATTACH=CONFIG]144605[/ATTACH]

Hi,
I have seen this sticker on my cousin's bike and he has not replaced this part since he bought his vehicle. I hope it comes with that sticker in some old models.
My 2t darling came back from service and mechanic said that there is a slight noise in bore as crank shaft has some play and should be repaired in next service. My bike is currently running on 0.25 oversize and planning to stock up a bore as backup.
here's the pic of the bike. Sorry for poor lighting.

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

Thanks Kusmaker. I spoke to another seasoned mech who knows a chap who could just pull it off. Yet to see how they would though. Will keep this thread posted. I'll keep the information on the OE parts when I go again to pick up the chain cover on Tuesday.



Hi Bharat. All the stuff that I bought were from Bangalore wheels. Haven't checked about the bore kits though. Will check and update soon. I wasn't very happy with a few spares though. Especially the tank lid that I bought. It has a strange sticker!

[ATTACH=CONFIG]144605[/ATTACH]

It's not strange buddy, this sticker is part of the fuel cap lid,although the design has changed in the past when this bike was manufactured the sticker was part of the lock, is this sticker available separately, i mean without this lock pls check it out at the shop if it is available and if it is then can you purchase it for me.A little bit of crank play is normal, small end freeplay should not be more than 1.5~2.00 mm.

[Bibhu]

Re: Spare parts thread 2 strokes Yamaha RX family

It's not strange buddy, this sticker is part of the fuel cap lid,although the design has changed in the past when this bike was manufactured the sticker was part of the lock, is this sticker available separately, i mean without this lock pls check it out at the shop if it is available and if it is then can you purchase it for me.A little bit of crank play is normal, small end freeplay should not be more than 1.5~2.00 mm.

Its available for 10-15rs here.

Sent from my GT-I9001 using xBhp Connect mobile app

[Divyanshp150]

Re: Spare parts thread 2 strokes Yamaha RX family

Www dot safexbikes .com
You can get new exhausts, tanks, clutches, body panels, meters etc online for rx here dont know if it has been posted before. Was passing buy, saw this thread, had info so shared

divyansh....

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

Www dot safexbikes .com
You can get new exhausts, tanks, clutches, body panels, meters etc online for rx here dont know if it has been posted before. Was passing buy, saw this thread, had info so shared

divyansh....

Thanks very much bro for informing about this site.

[SUMEET88]

Re: Spare parts thread 2 strokes Yamaha RX family



Escorts 'E' Written Doom set

[Mr.Boss]

Re: Spare parts thread 2 strokes Yamaha RX family

Www dot safexbikes .com
You can get new exhausts, tanks, clutches, body panels, meters etc online for rx here dont know if it has been posted before. Was passing buy, saw this thread, had info so shared.

Any experience with their products? Genuine?

[classiclover]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello buddy,in a way your mechanic is saying true getting that side lock again welded to a frame is quite a difficult task, first you have to grind that hole properly and then find a discarded frame, then again cutting that side lock from that frame and welding it on to your existing frame,and even if you find a frame there is no gurantee that it can be done properly, but still you can give it a go, for frame you can check at the scrap market, the seat matter is not that big you can purchase new seat from the ASC, oe crash guard is still available, even protector footrest(sareeguard) is also available, speedometer is available.

It's not strange buddy, this sticker is part of the fuel cap lid,although the design has changed in the past when this bike was manufactured the sticker was part of the lock, is this sticker available separately, i mean without this lock pls check it out at the shop if it is available and if it is then can you purchase it for me.A little bit of crank play is normal, small end freeplay should not be more than 1.5~2.00 mm.

Getting the sidelock assembly welded is my first task on the list. Hope it goes well.

The OE seat isn't available anymore. I enquired yesterday. Apparently the supply was stopped 2 years back. If you do find it at any other place in Bangalore please let me know.
Meanwhile, I'll enquire about the tank lid sticker. I saw someone selling it on OLX for Rs.100/-!! Pretty crazy.

I checked about the bore and it indeed is available. Rs.8500/- for both 4S and 5S. Do you think its a good idea to stock up on it now? Anyone has any experience in stocking up the future essentials of a RX135? Storage methods and a list may be?

PS: I'd also like to know the quality of the stuff from "safexbikes". Glad to see some after market stuff surfacing.

[naren.surii]

Re: Spare parts thread 2 strokes Yamaha RX family

Getting the sidelock assembly welded is my first task on the list. Hope it goes well.

The OE seat isn't available anymore. I enquired yesterday. Apparently the supply was stopped 2 years back. If you do find it at any other place in Bangalore please let me know.
Meanwhile, I'll enquire about the tank lid sticker. I saw someone selling it on OLX for Rs.100/-!! Pretty crazy.

I checked about the bore and it indeed is available. Rs.8500/- for both 4S and 5S. Do you think its a good idea to stock up on it now? Anyone has any experience in stocking up the future essentials of a RX135? Storage methods and a list may be?

PS: I'd also like to know the quality of the stuff from "safexbikes". Glad to see some after market stuff surfacing.

Oe seat is available at MRP with Me. PM me if you're interested .

Sent from my HTC Desire X dual sim using xBhp Connect mobile app

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

Getting the sidelock assembly welded is my first task on the list. Hope it goes well.

The OE seat isn't available anymore. I enquired yesterday. Apparently the supply was stopped 2 years back. If you do find it at any other place in Bangalore please let me know.
Meanwhile, I'll enquire about the tank lid sticker. I saw someone selling it on OLX for Rs.100/-!! Pretty crazy.

I checked about the bore and it indeed is available. Rs.8500/- for both 4S and 5S. Do you think its a good idea to stock up on it now? Anyone has any experience in stocking up the future essentials of a RX135? Storage methods and a list may be?

PS: I'd also like to know the quality of the stuff from "safexbikes". Glad to see some after market stuff surfacing.

Oe seat is still available i think is around 1100rs/- and the cost of the bore is ok, you can stock up now if you want to keep the rx-135, just keep it in the area which is devoid of moisture coat the inner side of the bore with plenty of oil, oil the piston, and you can keep it safe as long as you want.

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

Oe seat is still available i think is around 1100rs/- and the cost of the bore is ok, you can stock up now if you want to keep the rx-135, just keep it in the area which is devoid of moisture coat the inner side of the bore with plenty of oil, oil the piston, and you can keep it safe as long as you want.

can you please elaborate on the need to "oil the piston" before storing it

[Divyanshp150]

Re: Spare parts thread 2 strokes Yamaha RX family

Thanks very much bro for informing about this site.

Oyee you are my brother ojee ghar ki baat hai!

Any experience with their products? Genuine?

Some are oe like headlight domes and tail lights etc,
Tanks are galvanized steel! And painted better then stock and clear coated! They even have complete stickering kit,
Some parts are not oe but of similar if not better quality
Lights etc are lumax and escorts
Genuine?
Clutches too
Indonesiaan and jap imports for engine parts


divyansh....

[Divyanshp150]

Re: Spare parts thread 2 strokes Yamaha RX family

can you please elaborate on the need to "oil the piston" before storing it

To save piston rings I guess.... unoiled piston rings will become brittle and life will shorten kya? Thats why the piston rings packets even contain oil?
I think there is more reason to it, my bro will guide....more

divyansh....

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

If one wants to store his bike or engine for more than six months, you have to protect your cylinder and piston rings from potentially rusting,although If one wants to store a running engine for long time one thing a person can do is to remove the spark plug and squirt some light oil into the cylinders and rotate it couple of turn then screw the plug back finger tight, this will protect piston rings from seizing, whenever you want to use the engine just spin the engine to remove most of the oil,and you are good to go, or one can use a product called fogging oil, i feel same is the case with if one wants to store fresh cylinder, plug all the ports with rags to prevent entering of rodents.