Spare parts thread 2 strokes Yamaha RX family

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

Ohhk. Ill do that. And your opinion over KRP's chambers??.. Good?..i mean should go in for it??.

i still stand by what i told you before , avoid them if possible, btw what happened to the chamber whose image you posted before

PS: irrespective of which chamber you buy be ready with a few larger jets , and spark plugs to calibrate the carb according to the chamber

[Ankitvile]

Re: Spare parts thread 2 strokes Yamaha RX family

i still stand by what i told you before , avoid them if possible, btw what happened to the chamber whose image you posted before

PS: irrespective of which chamber you buy be ready with a few larger jets , and spark plugs to calibrate the carb according to the chamber

Im still finding hard to make up my mind on one of the chambers. The only thing that is eating me inside is if the chamber ill choose will match the barrel fine and wont ruin the engine.
The chamber's pic i posted earlier was from the Zen Motors Banglore(aka power tuners on FB). He is pricing at 3000Rs and says its very precisely done for 5speed barrels.
Though i wish to buy it...but still im thinking is if i could get a pre-made chamber like the DTW or KRP(although i dont wanto go with KRPs either) and be on the safe side away from worries and extra bullcrap.
Help !!

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

Im still finding hard to make up my mind on one of the chambers. The only thing that is eating me inside is if the chamber ill choose will match the barrel fine and wont ruin the engine.
The chamber's pic i posted earlier was from the Zen Motors Banglore(aka power tuners on FB). He is pricing at 3000Rs and says its very precisely done for 5speed barrels.
Though i wish to buy it...but still im thinking is if i could get a pre-made chamber like the DTW or KRP(although i dont wanto go with KRPs either) and be on the safe side away from worries and extra bullcrap.
Help !!

at this rate you will never use one , and about worries , my friend you are triying to make the engine do something it wasnt designed to do, you should be worried , untill yu get the setup right, in the world of of engine tuning there is no safe way to squeeze out more power and be free of worries , so if you want to play the game be ready to bear some pain
zen motors eh i thought they were experts with suzys, if the zen motors you mentioned is the same as the one im mentioning

[Ankitvile]

Re: Spare parts thread 2 strokes Yamaha RX family

at this rate you will never use one , and about worries , my friend you are triying to make the engine do something it wasnt designed to do, you should be worried , untill yu get the setup right, in the world of of engine tuning there is no safe way to squeeze out more power and be free of worries , so if you want to play the game be ready to bear some pain
zen motors eh i thought they were experts with suzys, if the zen motors you mentioned is the same as the one im mentioning

Haha. Yaah thats true!. I got to get out of this viscious circle. So its done then.. ill buy that custom made Zenmotors one lets see how it shapes out to be. Ill chip in again if somethings up.
Thanks.

[kb100]

Re: Spare parts thread 2 strokes Yamaha RX family

Haha. Yaah thats true!. I got to get out of this viscious circle. So its done then.. ill buy that custom made Zenmotors one lets see how it shapes out to be. Ill chip in again if somethings up.
Thanks.

dont forget the jets man , ask them to supply you with bigger jets too

[Joy Sen]

Re: Spare parts thread 2 strokes Yamaha RX family

hey guys i am getting one KB 100 in 5000/- gud condition shud i buy that or not pl tell ...thanks

Sent from my SCH-I559 using Tapatalk 2

[naren.surii]

Re: Spare parts thread 2 strokes Yamaha RX family

hey guys i am getting one KB 100 in 5000/- gud condition shud i buy that or not pl tell ...thanks

Sent from my SCH-I559 using Tapatalk 2

Buy it bro .

[Mr.Boss]

Re: Spare parts thread 2 strokes Yamaha RX family

hey guys i am getting one KB 100 in 5000/- gud condition shud i buy that or not pl tell ...thanks

Depends on the condition of vehicle and documents.
Either a 'just' running condition KB with valid & current documents or a well maintained KB with not in live documents both are worth for 5k INR
BTW this thread is meant for some other topic, can you please post in relevant thread.

[Ankitvile]

Re: Spare parts thread 2 strokes Yamaha RX family

dont forget the jets man , ask them to supply you with bigger jets too

Ohh....yess. Thanks.

[baruc2003]

Re: Spare parts thread 2 strokes Yamaha RX family

Hi Experts,
Can anyone help me in sourcing RX 5 speed jets. Kit or the main jet '135' atleast. My bike is running on 165.Please let me know if you have any contacts. I am based out of bangalore.

Thanks,
Bharath

[SriramEfunds]

Re: Spare parts thread 2 strokes Yamaha RX family

Hi Experts,
Can anyone help me in sourcing RX 5 speed jets. Kit or the main jet '135' atleast. My bike is running on 165.Please let me know if you have any contacts. I am based out of bangalore.

Thanks,
Bharath

Check this site GENUINE MIKUNI HEX MAIN JETS 4/042

Hope it helps to get your requirement.

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello guys iam looking for yamaha rx100 speedometers which came with ESCORTS embossed on top, and not the current ones with Yamaha logo, if anyone is having these meters pls respond, i need two pieces, plus i need an 5speed gear box to convert my rx100 to 5speed, anyone having them pls reply,Thanks.

[classiclover]

Re: Spare parts thread 2 strokes Yamaha RX family

This might be a fairly lengthy post considering it has some pictures in it. My 2002 RX135 4 Speed has been with me for the longest time. Its been re bored once and has run around 7200 kms since. The two years in 2011 and 2012 that I was in Bombay saw the bike languishing in my garage. Every 6 months that I came back home, I would use it to the maximum just to keep it in shape. The Bangalore weather and the original cover from the showroom that I had bought before leaving were fairly considerate on the machine through all the seasons.

At the time when it was rebored it was also given a mild face lift. This was a time when I didn't pay much attention to the way the bike looked. Mainly the way in which parts were removed and changed. Now I do not want to bad mouth the really popular mechanic who has a garage in Vijayanagar, Bangalore who mostly charged me for the replacement parts while basically taking all the original parts and probably using it on another machine. I have moved on from the bitter experience and I would just want to "keep it real" in a sense when it comes to my bike.

I found almost all the parts that I needed urgently in the Yamaha spares department of Bangalore Wheels, Rajajinagar. Its nice to know that at least some odd original spares are still available.

The first thing that I want to change is the complete lock set including the ignition. The only roadblock to achieving this is that the frame in which the round lock fits, has been cut off (pic inserted) from the main chassis frame itself when the mechanic changed the locking system to a very crappy central locking using a Fiero spare part.

The Original Lock Kit.

The innards.

MINDA

Portion of the sidelock frame which has been cut off from the chassis.

Although my mechanic says that its impossible to put a side lock now, I am determined to find a way out of this predicament. My questions regarding this to you'll is:
1) Can I find a frame which could be used to weld back the round hole back onto the chassis?
2) Which is the best place that I can get this done in Bangalore?

Furthermore, in the quest of bringing back the bike to its original shape, I am going to do the following:


Get the front doom and the Yamaha emblem/number plate fit back onto the bike. (No idea why that guy removed it!)


Get the original chain cover onto the machine. The guy talked me into putting a half plastic one instead to get rid of some "noise" that was coming out of the chain area. (yes, I was that naive then). I haven't got the chain cover as yet, but I've been promised an original new chain cover over the weekend.


Although I have to admit that I really like the comfort this seat provides, it still looks downmarket and I guess changing it back to its original seat would not be overly unfair to my backside. So this seat is also going. Would anyone know of a place in Bangalore where I can get the seat changed back to the original specs?


Change the speedo cap with the original one with a YAMAHA emblem on top.


Finally I would also want to fix a butterfly crash guard as well as a Pillion Hand Grip?? (as shown in the illustrated picture. Correct me if I have named the part wrong) onto the bike.
NOTE: Not my bike. Reference: http://www.xbhp.com/talkies/general-...ow-1-lakh.html

I do hope someone here can help me with these simple questions.
Finally, I know looking at all the pictures that you'll would be wondering what I was thinking when these parts where changed but considering the way in which I have come to know the importance of maintaining a bike, I am a little wiser now than before. I am also a little wiser now to only let the right kind of people touch my bike; mechanic and friends included.

A few extra pictures that I took this sleepy Sunday afternoon.



Good day. Nakul

[kusmaker]

Re: Spare parts thread 2 strokes Yamaha RX family

Hello buddy,in a way your mechanic is saying true getting that side lock again welded to a frame is quite a difficult task, first you have to grind that hole properly and then find a discarded frame, then again cutting that side lock from that frame and welding it on to your existing frame,and even if you find a frame there is no gurantee that it can be done properly, but still you can give it a go, for frame you can check at the scrap market, the seat matter is not that big you can purchase new seat from the ASC, oe crash guard is still available, even protector footrest(sareeguard) is also available, speedometer is available.

[baruc2003]

Re: Spare parts thread 2 strokes Yamaha RX family

Check this site GENUINE MIKUNI HEX MAIN JETS 4/042

Hope it helps to get your requirement.

Thanks Buddy! I managed to get UCAL jet 135 and pilot jet 15.0 from a shop near commercial street.
I had taken three parts and price came to 610.
1 nos 135 main jet, 1 nos 15.0 pilot jet, 1 nos float pin, r15 right side rvm. Total cost-610.

Hi Classiclover, Have you ordered all the stuffs from bangalore wheels? I had seen few people buy bore kits there, I enquired and they said it would cost 8500 be it a 4speed or 5speed RX.
Thanks,
Bharath