Let there be Light : Bike Lighting, HID etc

[balajidiwakar]

hi guys, actually I was trying to install the avenger stator plate in my pulsar. got stuck with the electrical stuff...gotta few queries..see the pics below:

This one is the stock one


This is the avenger's. The neutral connection is separate


My question is how do I connect the neutral wire into the wiring harness. Please help

[killerrider]

want 55w bulb for my Apache RTR 160

I have Apache RTR 160.
i want to use 55w bulb in my byk nd i did it earlier bt result was bettery consumed alot.. after fiting relay after that i remove 55w bulb nd fittied same 35 w.. bt i again want to fit 55w bulb bt wid less bettery consume
as i read before that some guys r using Avenger coil for bulb can i also use it in ma byk.. is it harm for my byk or its good.??
plzz help reply soon
yo0

[dual disc 200]

I have Apache RTR 160.
i want to use 55w bulb in my byk nd i did it earlier bt result was bettery consumed alot.. after fiting relay after that i remove 55w bulb nd fittied same 35 w.. bt i again want to fit 55w bulb bt wid less bettery consume
as i read before that some guys r using Avenger coil for bulb can i also use it in ma byk.. is it harm for my byk or its good.??
plzz help reply soon
yo0

Dude, first of all Welcome to X-BHP!!
see, using a 55w bulb in place of 35w is almost the same where the brightness will be the same as 35w, as the coil in ur bike cant generate enough current to power up a 55w one. Secondly, i'm wondering how did a 55w bulb eat ur battery as ur bulb is running on AC and only pass will work in DC in RTR's. If that's right, did u use pass continuously or did u convert ur bikes electricals to DC??? U cannot use avengers coil plates as it fits only in pulsars and not RTR's!!!(correct me in this if i'm wrong) Why dont u save up some money and go for HID's??

[rahuldevnath]

hi guys, actually I was trying to install the avenger stator plate in my pulsar. got stuck with the electrical stuff...gotta few queries..see the pics below:

This one is the stock one


This is the avenger's. The neutral connection is separate


My question is how do I connect the neutral wire into the wiring harness. Please help

I assume that you are installing avenger coil on a Pulsar, that is GND, and will be connected to GND socket, located just next to the coil assembly. Its on right hand side of the coil, where the sprocket is.

[killerrider]

Dude, first of all Welcome to X-BHP!!
see, using a 55w bulb in place of 35w is almost the same where the brightness will be the same as 35w, as the coil in ur bike cant generate enough current to power up a 55w one. Secondly, i'm wondering how did a 55w bulb eat ur battery as ur bulb is running on AC and only pass will work in DC in RTR's. If that's right, did u use pass continuously or did u convert ur bikes electricals to DC??? U cannot use avengers coil plates as it fits only in pulsars and not RTR's!!!(correct me in this if i'm wrong) Why dont u save up some money and go for HID's?? __________________



thanxx broo bt i dont want HId ..
I heared that its also consume bettery too much.
Any other idea??

[pavanchirmade]

I assume that you are installing avenger coil on a Pulsar, that is GND, and will be connected to GND socket, located just next to the coil assembly. Its on right hand side of the coil, where the sprocket is.

U sure thats gnd buddy?
IMO that is the neutral indicator signal cable.

[balajidiwakar]

U sure thats gnd buddy?
IMO that is the neutral indicator signal cable.

ya it is not GND. There is another wire for that and it fits properly. The one I have shown in the pics is actually the neutral indicator wire..

[rahuldevnath]

ya it is not GND. There is another wire for that and it fits properly. The one I have shown in the pics is actually the neutral indicator wire..

If thats the case why don't you cut and tap to the bikes wiring?

[balajidiwakar]

If thats the case why don't you cut and tap to the bikes wiring?

Hi rahul, I tried to remove the blue-white wire from the harness and inserted the green wire in its place. But bike did not start. Can you gemme a bit more explanation, if possible a diagram, as I have no experience with the electricals.

[dominic]

If thats the case why don't you cut and tap to the bikes wiring?

that's exactly what my mech did

[killerrider]

common man help me..

[anirudh fz1]

Dude, first of all Welcome to X-BHP!!
see, using a 55w bulb in place of 35w is almost the same where the brightness will be the same as 35w, as the coil in ur bike cant generate enough current to power up a 55w one. Secondly, i'm wondering how did a 55w bulb eat ur battery as ur bulb is running on AC and only pass will work in DC in RTR's. If that's right, did u use pass continuously or did u convert ur bikes electricals to DC??? U cannot use avengers coil plates as it fits only in pulsars and not RTR's!!!(correct me in this if i'm wrong) Why dont u save up some money and go for HID's??

how much does a good hid cost 35watts

[rahuldevnath]

Hi rahul, I tried to remove the blue-white wire from the harness and inserted the green wire in its place. But bike did not start. Can you gemme a bit more explanation, if possible a diagram, as I have no experience with the electricals.

Unfortunately, I don't have acess to my bike, so can't verify. But can you clearify which all coloured wires are there in the bikes harness and which are missing?

Edit: If I'm not wrong, the green wire is insidr the harness and in the avenger coil it's seperate, then why don't you slightly cut the green after the harness and tap the avenger's seperate wire to it? Or the green wire is missing altogather?

[balajidiwakar]

the green wire is not missed altogether. What you are telling is that remove the green wire from the harness in the bike and cut the one from avenger and manually connect outside the harness, please correct me

[rahuldevnath]

the green wire is not missed altogether. What you are telling is that remove the green wire from the harness in the bike and cut the one from avenger and manually connect outside the harness, please correct me

Yes, thats what i'm saying, provided that's the only problem you have.