Let there be Light : Bike Lighting, HID etc

[Naveen Vajja]

Re: Let there be Light : Bike Lighting, HID etc

From where one can buy turbo v16 morimoto and cyclops led headlamps

Can you share a lvnk for them, especially for turbo v16.

For V16 Turbo talk to [MENTION=79019]Zaid77[/MENTION]

For Cyclops ... try 'SpeedMonks Performance Center' in facebook or there was a ebay link shared by [MENTION=51754]theironhorse99[/MENTION]

----consecutive posts auto-merged-----

New H4 CREE LED Motorcycle Headlight Bulb 4000LM 40W Hi/Lo 20W Low Beam Conversion Kit 3000K 4300K 6000K DC 12V P43T Headlamp

http://s.aliexpress.com/6RNzEJ7Z

(from AliExpress Android)

What are your views on this one, is this one worth buying ??
My inclination towards it is because it can be bought in 4300k.

Wen you check the user picture reviews ... you'll notice it says 'V16 Turbo' on the ballast.

So if it is V16 ..... any point waiting that long for it to arrive.

[zeeshan300975]

Re: Let there be Light : Bike Lighting, HID etc

Would you guys please suggest a good solution to replace the stock headlight bulb in CBR 260. I'm confused, HID or LED ...??? I dont want spot, I'd prefer flood & bright, around 55W, white light that eats less battery. Pls suggest some shop in Delhi/Gurgaon so that I can check & buy. Thanx in advance.

[KnG]

Re: Let there be Light : Bike Lighting, HID etc

That looks like a standard h7.

12v 55w h7. It is printed on the base.

Thank you very much for replying. Can you suggest any alternative LED replacement for the stock bulbs which provides better light 💡. 😀😀

[acs1207]

Re: Let there be Light : Bike Lighting, HID etc

Thank you very much for replying. Can you suggest any alternative LED replacement for the stock bulbs which provides better light 💡. 😀😀

Dunno about best alternative. I was just clarifying about bulb.

[joshdsy]

Re: Let there be Light : Bike Lighting, HID etc

If I'm not mistake most bullets can take 100 watt bulbs with no issues .

[gunner143]

Re: Let there be Light : Bike Lighting, HID etc

If I'm not mistake most bullets can take 100 watt bulbs with no issues .

Yes royal enfields have 10amp batteries so 100w bulbs are no probs.
But imo a better solution wud be to use aux lamps on crash guards.

[gunner143]

Re: Let there be Light : Bike Lighting, HID etc

Hi is anybody using led headlamp with a fanned heat sink in the main headlight of pulsar 200ns ??
I had a look behind the headlight assembly of my 200ns and boy that area is tightly packed !!

I dont i would be a able to use led with a proper fanned heat sink, and even if i could make it work somehow it will be a very tight fit.

[Zaid77]

Re: Let there be Light : Bike Lighting, HID etc

Hi is anybody using led headlamp with a fanned heat sink in the main headlight of pulsar 200ns ??
I had a look behind the headlight assembly of my 200ns and boy that area is tightly packed !!

I dont i would be a able to use led with a proper fanned heat sink, and even if i could make it work somehow it will be a very tight fit.

Hi,
Yes you're right NS200 has a slightly tighter space, but not that it couldn't fit a LED.
My friends have got their led with fan into without anyproblem . [emoji4]

-Zaid[emoji111]

[TUHIN360]

HID light for hero super splendor.

Please suggest me a HID light which I can install on my super splendor.
Thanks in advance.

[Divya Sharan]

Re: HID light for hero super splendor.

Please suggest me a HID light which I can install on my super splendor.
Thanks in advance.

Approved and merged!

Read through this thread to get the answer to your query.
Tip 1 - It is NOT a direct fit.
Tip 2 - Super Splendor doesn't have a DC setup. HID works only on DC setup. Coil rewinding and DC conversion would be needed.
Tip 3 - If you fit an HID bulb, ensure you put a projector too.

[gunner143]

Re: HID light for hero super splendor.

Approved and merged!

Read through this thread to get the answer to your query.
Tip 1 - It is NOT a direct fit.
Tip 2 - Super Splendor doesn't have a DC setup. HID works only on DC setup. Coil rewinding and DC conversion would be needed.
Tip 3 - If you fit an HID bulb, ensure you put a projector too.

And a good projector aswell because no matter how powerfull is your light source , if it ain't focused properly it will end up being utterly useless. Thats because most cheap projectors are basically floods with no focus at all.

So basically only the next 10 feet will be properly lit up. But dont expect any more than that.

I would suggest that you dont fiddle with your headlight and go for led light bar in spot configuration. Get them fitted on your crash guard , trust me you will find it to be very useful with all that focused light on the road that u can actually use.

[TUHIN360]

Re: Let there be Light : Bike Lighting, HID etc

Is Philips crystal vision will be a good option over the stock bulb

[Veeral]

Re: Let there be Light : Bike Lighting, HID etc

Is Philips crystal vision will be a good option over the stock bulb

I ordered Philip's xtreme vision for 700/-.
55w for duke 390.

[gunner143]

Re: Let there be Light : Bike Lighting, HID etc

I just ordered a (40/20-hi/low) turbo v16 led in 4300k for Rs2k for my 200ns.
Now the long wait begins lol.

[gunner143]

Re: Let there be Light : Bike Lighting, HID etc

Here is my chat with one of the best sellers for 4 inch osram 30w led bar.
Not exactly confidence inspiring i would say.
I messed up the upload order , its reversed so start reading from the last pic then second last and so on....