You can check for fuel supply blockage after the carburator.
Announcement
Collapse
No announcement yet.
Yamaha FZ-16/ FZ-S
Collapse
X
-
Re: Yamaha FZ-16/ FZ-S
1, May you use low quality of fuel (Some Mixing by fuel pump),Originally posted by devils_friend View PostHappens at any speed, any gear.
2, Rust came to carburetor from fuel tank,
3, Spark plug not perform well and coil loose or brake,
4, Very liner fuel supply,
Check out for this....
----consecutive posts auto-merged-----
Did you check your top end, i think you may gain some horse power after 7.5kOriginally posted by uddiptocse View Postloved the bassy tone of my fz after cutting the exhaust after the catcon..more smooth pickup ..now gr8 tone than apache

----consecutive posts auto-merged-----
Please share your experience what you feel after bye pass the cat con on stock exhaust, do you feel any power loss or you reach top end easily,Originally posted by pawangreat View PostHey guys can anyone suggest me from where to get 38 teeth rear sprocket for my fazer
I am currently running it with stock exhaust (remove catalytic converter), 15 teeth front sprocket, KN filter with upjetting of P200. so I want to use the max power generated by my bikes engine
and do feel any vibration in bike of any harmful effect on engine.
Comment
-
Re: Yamaha FZ-16/ FZ-S
I had done it but fitted the catcon back.Honestly didnt like it.Sound changed but pickup went down..didnt get any increase in top end .just feels a bit rev happy at higher speed and mileage decreases.Originally posted by Prince_Haider View Post1,
Please share your experience what you feel after bye pass the cat con on stock exhaust, do you feel any power loss or you reach top end easily,
and do feel any vibration in bike of any harmful effect on engine.
Sent from my SGH-I747M using xBhp Connect mobile appLast edited by Ishwor; 09-20-2015, 11:58 AM.
Comment
-
Re: Yamaha FZ-16/ FZ-S
Which 15t sproket are u using?Originally posted by Ishwor View PostI had dont it fitted it back.Honestly didnt like it.Sound changed but pickup went down..didnt get any increase in top end .just feels a bit rev happy at higher speed and mileage decreases.
Sent from my SGH-I747M using xBhp Connect mobile app
Comment
-
Re: Yamaha FZ-16/ FZ-S
Hi friend i am looking led for my fzs. Anyone plz tell me should i go for 65watt halogen or led (not hid). If led, then does it require to change wiring or just plug and play setup.
And one more thing is led available in 65watt and where to buy it in Delhi.Last edited by Aakash Singh; 09-20-2015, 10:31 PM.
Comment
-
Re: Yamaha FZ-16/ FZ-S
If you are referring to the headlamp then it will be a bad idea to go for LED. LED headlamp just brightens the reflectors no lights on the road. It's better to stick to stock yellow lights or upgrade to Philips Extreme Vision 60/55. They are direct fit and results are satisfying.Originally posted by Aakash Singh View PostHi friend i am looking led for my fzs. Anyone plz tell me should i go for 65watt halogen or led (not hid). If led, then does it require to change wiring or just plug and play setup.
And one more thing is led available in 65watt and where to buy it in Delhi.Bilal Ahmed
FZ - S
Comment
-
Re: Yamaha FZ-16/ FZ-S
Originally posted by Ishwor View PostI had done it but fitted the catcon back.Honestly didnt like it.Sound changed but pickup went down..didnt get any increase in top end .just feels a bit rev happy at higher speed and mileage decreases.
Sent from my SGH-I747M using xBhp Connect mobile app
What is the top end after cut the silencer...
My bike running smoothly but i want to touch red line in fifth gear with stock displacement (153cc) to reach 130km/h because big bore is not suitable for bike.
stock engine is very calm and easy to ride...
Comment
-
Re: Yamaha FZ-16/ FZ-S
I didnt do top speed test.Felt the bike was little more responsive towards higher rpm but the low end pick went down a lot.Originally posted by Prince_Haider View PostWhat is the top end after cut the silencer...
My bike running smoothly but i want to touch red line in fifth gear with stock displacement (153cc) to reach 130km/h because big bore is not suitable for bike.
stock engine is very calm and easy to ride...
I dont think fz can do 130 even with a free flow exhaust.Its not worth doing the mod.Better stick with stockup setup.
Sent from my SGH-I747M using xBhp Connect mobile app
Comment



Comment