Re: Fiero/FieroF2/FieroFx

What's up guys looks like fiero is running without any hassles & thus it's dead silent in the thread.

Sent from my GT-N7100 using Tapatalk

Re: Fiero/FieroF2/FieroFx

Can anyone get me the steering T for my 2004 Fiero F2?
After replacing the front suspension inner rods, springs&coneset, the problem has finally boiled down to the T.

Sent from my Galaxy Note using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

Sarvajit extremely sorry dude I couldn't check on this. As I told I was down with broken leg due to some issues I was hospitalised & am still not fit. I am completely out of any activity for last 1 month.

Sent from my GT-N7100 using Tapatalk

Re: Fiero/FieroF2/FieroFx

No problem buddy, I'm getting it opened up at the service this weekend. [MENTION=13389]gixxer_junkie_m[/MENTION]: Should have some update about the carb!

Sent from my Galaxy Note using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

[MENTION=13846]Sarvajit[/MENTION]
Checked with krpuram tvs asc . They hav the t-stem plate . Costs rs427 .


Sent from my GT-I9500 using Tapatalk

Re: Fiero/FieroF2/FieroFx

Thanks a lot buddy! If it isn't too far from your place, would you be able to buy&send it across?
I'm PMing you my address details.
Looking forward to hearing from you soon.

Sent from my Samsung Galaxy Note 3 Neo using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

Ping!!!
Where is everyone?? Havent heard from all in a while .

Few queries again regarding fiero . Need some input guys .
*200cc + bs26 + apache head - do I risk a lean mixture here ??
If im to upgrade to 200 I.e

*how to know if swingarm bushes need to be replaced.? Nothing wrong as of now. But suspension is quite stiff . Any suggestions for new shocks for riding fast over potholes thank you very much

*can somebody tell me how long I can run a 200cc w/o risk of melting down .

*what are the risk associated if I run without a battery to the cdi? Or anything else at all

rIbu

Sent from my GT-I9500 using Tapatalk

Re: Fiero/FieroF2/FieroFx

[MENTION=13846]Sarvajit[/MENTION]
Buddy hope you got that ride fixed .

Sent from my GT-I9500 using Tapatalk

Re: Fiero/FieroF2/FieroFx

@All: I'm happy to report that the carburettor problem is now solved.

The jammed and rusted air screw had to be drilled out at the Lathe shop& then rethreaded. Once the new screw was in, we turned it 4 turns and checked for mileage with a 100ml can to find it ran for 4.7kms.
I'm especially happy that the overheating, jerking & mileage loss is solved. Bike feels smooth and happy to ride now.

Other parts replaced were disc pads, coneset and of course engine oil.

The front suspension issue is suppressed but it will crop up again soon enough.

Would really appreciate if anyone can help me with getting the T stem (not T plate, this is the lower part) and the cone cup (cup beneath the T and not race bearing kit). It will solve my front suspension woes forever.

Part nos. 27 and 28 are as follows from the Front Fork Assembly page in Spares Manual:
1. M7100690 - Lower Brkt. Comp.
2. M110450 - Dust Seal Steering Lower

Couple of jobs were missed out and will be done in the coming week.
Anabond paste on head for minor oil leakage
Accelerator cable replacement.

Really happy to own this bike even after 10+yrs. And 66.5K kms.!:thumbup:

Sent from my Samsung Galaxy Note 3 Neo using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

Hey guys. Hows everyone doing?

Sent from my GT-I8552 using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

Hey buddy, I just got my bike done up recently and posted an update (previous post). I had gone again today to replace the head oil seal (Rs.90) and accelerator cable (Rs.176).
Bike feels great though not as smooth as initial days.

After refitting the tank, the RHS lock cover doesn't stay even after taping the partly broken knob. The rubber is fine and I have replaced the lock too. It stays only on the below locked portion.
Any ideas for this? Or do I need to replace the cover?

On another note, parts availability issue is beginning to crop up as the nearby SVC is saying they can't order for Fiero/F2 parts anymore. Need to look for other options in and outside Hyderabad.


Sent from my Samsung Galaxy Note 3 Neo using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

The RHS cover is slotting into place perfectly now, thanks to some mechanic who simply adjusted the tank clip.
Waiting for a mileage check.

@All: Appreciate if you could help me with the T stem part or at least suggest a compatible part from another bike.

Sent from my Samsung Galaxy Note 3 Neo using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

@All: Why so silent? No replies/acknowledgements?
Hope you&your rides are in good shape!

Posting a few pics to liven up the atmosphere here.

1. My ride-still elegant as ever.:cool
2. The faulty kill switch solution!
3. The 'original' seat cover!
4. Prep for rainy (no rains so as to speak of)

I'm looking for the engine guard plate but unable to find

Sent from my Samsung Galaxy Note 3 Neo using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

Hey the bike looks gorgeous.
Yes the parts are becoming a problem to procure.

Sent from my Samsung Galaxy Grand Quattro using xBhp Connect mobile app

Re: Fiero/FieroF2/FieroFx

Hi Sarvajit bike looks beautiful but those gaitors are not looking good.Is Tvs still supplying parts for this model and the actual Fiero model or the aftermarket is only option, have you got the T-stem part if not then let me know i will try to check it here in my state,pls post a snap of your bike's current T-stem.