Announcement
Collapse
No announcement yet.
Kawasaki Ninja 250R
Collapse
X
-
-
Originally posted by trustvishwas View PostHeadlight bulb costs 900 bucks and not 2k. The alternative is to use bulb manufactured by Wruth. It has same specifications and cost around 200 bucks
Although it cost me 600 bucks, there are discounts / lower prices at some wholesale authorized stores where it can be procured for 450 bucks also.
It is significantly brighter than stock although both have the same product code. Me thinks the stock one is the xtreme power which has been discontinued some time back.
My low beam bulb fused so i moved the high beam bulb to the low beam socket and use the "new" xtreme vision at the high beam now. I could effortlessly and safely cruise at 140kmph at night with some occasional bursts to 150kmph at wide long open stretches.ATGATT - Because hospital ceilings are boring !!!
Comment
-
Originally posted by Malpotra View PostDay 1
Mumbai-Nashik-Dhule-Mhow-Neemuch-Chittorgarh (907 Km)Never argue with an idiot. He will drag you down to his level and then beat you with experience.
Check out my Ladakh travelogue - Ladakh Ride 2010
If you are getting bored with nothing to do in office check out my Rajasthan travelogue - Rajasthan Ride 2012
Bank loans for used superbikes is possible - Bank loans for used superbikes
Comment
-
[QUOTE=n_aditya;833447
]The engine oil lamp comes ON if there is a drop in the engine oil pressure. Best to get it checked at the service center mate. Don't take a chance. Worst case, the oil pump may be giving issues, have it checked and get it replaced under warranty if appl. at the service center.
Hey, I got it checked today in the morning. And the guy told me they will have to replace a sensor. And it would come under the warranty.
And what I also noticed was that. Many a ninja owners have the same problem right after the first service when they go past 10000rpm.Last edited by rkum4881; 06-28-2012, 01:57 PM.
Comment
-
Fram sliders.
Just ordered for the carbon fiber frame sliders from Planet DSG.
At first ordered for a normal black frame sliders. but then they(planet dsg) told me its out of stock and they will be getting a new set of frame sliders with a new look and carbon fiber material. They also told me that it would cost around 9k but I initially made a payment of 6k so they told me that since I am waiting for a long time they would give it to me at a discount of 3k. I hope its a good quality though.
Awesomeness!
Comment
-
Originally posted by rkum4881 View PostJust ordered for the carbon fiber frame sliders from Planet DSG.
At first ordered for a normal black frame sliders. but then they(planet dsg) told me its out of stock and they will be getting a new set of frame sliders with a new look and carbon fiber material. They also told me that it would cost around 9k but I initially made a payment of 6k so they told me that since I am waiting for a long time they would give it to me at a discount of 3k. I hope its a good quality though.
Awesomeness!Respect riding? then respect rules!!! be safe...
sigpic
Comment
-
Originally posted by trustvishwas View PostHeadlight bulb costs 900 bucks and not 2k. The alternative is to use bulb manufactured by Wruth. It has same specifications and cost around 200 bucks
It was not a typo. I referred to Ninja Workshop manual. I have not checked the owners manual though.
Owners manual says 20w50 and service manual says 10w40, why the disparity? maybe service manual from net is for the europen ninjas.
[QUOTE=rkum4881;833574Hey, I got it checked today in the morning. And the guy told me they will have to replace a sensor. And it would come under the warranty.
And what I also noticed was that. Many a ninja owners have the same problem right after the first service when they go past 10000rpm.[/QUOTE]
Glad to konw that you sorted out the issue. Let us know when you have change that sensor.
Originally posted by Harry82 View PostCan any one tell me the cost of front and rear disk pads
Comment
Comment