Announcement

**abhis3k** · 09-03-2011, 11:05 PM

Originally posted by biketo19 View Post

just complete 19000 km on my p135..

still give 50 to 55 mileage in city traffic. its run smooth after service.

NOW BAD PART.. electrical problems .like battery charging due to rain..

company warranty >> 1.5 year or 30000 km ... my battery has out of warranty ..

so now m confused between exide or amaron battery ,,:m

exide battery cost 1200 to 1350 with 1.5 year warranty but the other side
amaron battery cost 1000 to 1100 with 4 year warranty

Amaron is 1280 here with 4 year warranty & 2 year guarantee. If any problem within first 2 years they will simply replace it. Thats the best buy. Buy with eyes closed.

Originally posted by sunny27 View Post

[1] The people at the Bajaj Service center said they would charge me Rs.4000 to paint the bike with any paint scheme I fancy.

[2] Do let me know what would be the best tyres for my Pulsar 135 that I can switch to without sacrificing performance and fuel economy?

[3] Will these tyre sizes fit properly into my bike?
Front - 90/90x17
Rear - 120/80x17

IMHO, best ones are 2.75F & 100/90R Zappers, opt for the tubeless ones. That is the best!

**sunny27** · 09-03-2011, 11:54 PM

[1] I got into an accident today and as a result there are some scratches -a pretty substantial long scratch on the left hand side of the headlight plastic fairing. How would you guys suggest removing it and what would it cost me?

[2] I have got scratches on my leg guard as well. With the paint chipped off, it looks dirty. Is there any sort of rubber leg guard protector something similar to handle grips that can be fit there?

[3] Do you guys suggest getting an Engine protection plate? Something like this - AVON Auto :: Two wheeler Accessories, Scooter Accessories, Motorcycle Accessories for complete range of two wheelers from Honda, Hero Honda, Bajaj, TVS, Yamaha, Suzuki, Mahindra and Royal Enfield :: Manufacturer and Distributor from New Delhi India :

**CHNANDAKISHORE** · 09-05-2011, 02:11 AM

Oil changed

hi all, today i gave my bike for servicing and told to change oil to castrol activ xtra, but the service center guy changed to castrol but 20w40 instead of 20w50...How will it effect the bike??

**CHNANDAKISHORE** · 09-05-2011, 02:13 AM

shocks

also, my rear shock absorber is absorbing only little shocks, when i cross a speed breaker or pass from some hole,i am getting pains ..plz help me out..
even front shocks not good, but better than rear..

**sunny27** · 09-05-2011, 09:57 PM

Can a belly pan from the Apache 160 be fitted onto the Pulsar 135? Will it hamper performance and cause the engine to heat up?

**abhis3k** · 09-05-2011, 11:47 PM

Originally posted by CHNANDAKISHORE View Post

hi all, today i gave my bike for servicing and told to change oil to castrol activ xtra, but the service center guy changed to castrol but 20w40 instead of 20w50...How will it effect the bike??

It will effect .... not immediately but surely. Better switch to 20W50.

Originally posted by CHNANDAKISHORE View Post

also, my rear shock absorber is absorbing only little shocks, when i cross a speed breaker or pass from some hole,i am getting pains ..plz help me out..
even front shocks not good, but better than rear..

Rear one is set to 2nd softest setting for better handling. You can set it to softest but it will effect handling. Better get a nicely cushioned seat.

Originally posted by sunny27 View Post

Can a belly pan from the Apache 160 be fitted onto the Pulsar 135? Will it hamper performance and cause the engine to heat up?

AFAIK a engine cowl from Apache or stunner can be fitted very easily. It will not cause much heat up in LS.

**trsakhilk** · 09-06-2011, 11:04 AM

Originally posted by sunny27 View Post

[1] I got into an accident today and as a result there are some scratches -a pretty substantial long scratch on the left hand side of the headlight plastic fairing. How would you guys suggest removing it and what would it cost me?

I had a similar incident two days back..only difference is that mine is on the right side of the headlight fairing.

...when i gave my bike for servicing i asked the SVC guy abt the cost it will take for painting the scratch..he said it would be less costly to change the part itself than go for painting it again...

I think he said it would take somewhere between Rs. 200-300 for that part whereas it will take Rs. 500 to paint it..

.
Well i just gave my bike for servicing only...will look into it later..

**Alok Sam** · 09-06-2011, 03:58 PM

Good Service Station in Pune.

Recently Serviced my P135 @ Sai Service, Paud Phata, Pune.

What to say, Im not happy with the service and also this station has too many bikes to individually look into a single bike.

So, any one of you know's a better service station in Pune?

**Cyber Don** · 09-06-2011, 11:47 PM

Originally posted by trsakhilk View Post

I had a similar incident two days back..only difference is that mine is on the right side of the headlight fairing.

...when i gave my bike for servicing i asked the SVC guy abt the cost it will take for painting the scratch..he said it would be less costly to change the part itself than go for painting it again...

I think he said it would take somewhere between Rs. 200-300 for that part whereas it will take Rs. 500 to paint it..

.
Well i just gave my bike for servicing only...will look into it later..

is it coincidence... :|

my bike has a 2 inch scratch, i dropped it while i was checking for some stone or something that was hitting my silencer :|

yes, on the headlight fairing of course :|

right side :|

**biketo19** · 09-09-2011, 01:26 PM

Originally posted by CHNANDAKISHORE View Post

hi all, today i gave my bike for servicing and told to change oil to castrol activ xtra, but the service center guy changed to castrol but 20w40 instead of 20w50...How will it effect the bike??

Yes it will effect your bike performance .. changed it after 2.5k km..
next time asked svc guys for 20w50 or bajaj's so called dtsi 20w50 oil..

**andrei79** · 09-09-2011, 06:09 PM

pulsar 135ls feedback

helo pulsar 135ls users im andrei a filipino from philippines and i have a pulsar 135ls (rouser 135ls name in the philippines) and ican only say that this bike is awesome

just want to ask if there is any K&N filter available for our pulsar 135ls because im searching in the store shop here in the philippines but they said there is none the only thing available is for the pulsar 220 or 200 thanks

here is a pic of my beloved pulsar 135ls a.k.a rouser135ls in philippines

**Cyber Don** · 09-09-2011, 11:37 PM

Originally posted by andrei79 View Post

helo pulsar 135ls users im andrei a filipino from philippines and i have a pulsar 135ls (rouser 135ls name in the philippines) and ican only say that this bike is awesome

just want to ask if there is any K&N filter available for our pulsar 135ls because im searching in the store shop here in the philippines but they said there is none the only thing available is for the pulsar 220 or 200 thanks

here is a pic of my beloved pulsar 135ls a.k.a rouser135ls in philippines

hey dude,

K&N filter's arent available for the P135 yet

**andrei79** · 09-10-2011, 10:05 AM

Originally posted by Cyber Don View Post

hey dude,

K&N filter's arent available for the P135 yet

ok thanks any other replacement you can suggest because here in the we have difficulty in finding stock parts for pulsar 135ls because its a new model

and any advice how can i improve the performance of the bike aside from putting high flow air filter and Iridium spark plug? is there anybody try to open up the muffler or cut the muffler and replace with a open pipe canister whats the improvement?

**Cyber Don** · 09-10-2011, 06:14 PM

Originally posted by andrei79 View Post

ok thanks any other replacement you can suggest because here in the we have difficulty in finding stock parts for pulsar 135ls because its a new model

and any advice how can i improve the performance of the bike aside from putting high flow air filter and Iridium spark plug? is there anybody try to open up the muffler or cut the muffler and replace with a open pipe canister whats the improvement?

i have no idea

LOL!

if you put a high airflow filter, you need to rejet the carb to get the most of the high airflow filter

**BikerKid** · 09-11-2011, 12:05 AM

Originally posted by andrei79 View Post

helo pulsar 135ls users im andrei a filipino from philippines and i have a pulsar 135ls (rouser 135ls name in the philippines) and ican only say that this bike is awesome

just want to ask if there is any K&N filter available for our pulsar 135ls because im searching in the store shop here in the philippines but they said there is none the only thing available is for the pulsar 220 or 200 thanks

here is a pic of my beloved pulsar 135ls a.k.a rouser135ls in philippines

k&n rc 1060 should fit your pulsar...and you have to fit bigger jets for your carb and retune the carb for optimal performance. upjetting the carb is important!

Announcement

Pulsar 135 LS

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment