It could be something as minor as a loose connection. Have it checked at the SVC.

Thanks a lot everyone
@santa: OT, but I'd love to see you again someday, you're one pure-hearted soul! :P

And as promised, I tried taking a few daylight pics:



[ATTACH]9013[/ATTACH] [ATTACH]9014[/ATTACH]

[ATTACH]9015[/ATTACH] [ATTACH]9016[/ATTACH]

[ATTACH]9017[/ATTACH] [ATTACH]9018[/ATTACH]

[ATTACH]9019[/ATTACH] [ATTACH]9020[/ATTACH]

[ATTACH]9021[/ATTACH]



Features:
1)Two dedicated inner projectors for low beam alone.(one each side)
2)Two outer projectors dedicated for high beam alone.(one each side again)
3)Depth perception, the inner projectors poke out by an inch when compared to the outer two projectors.
4)No light spillage anywhere.
5)Even the high beam projectors have cut-offs.
6)All four lamps light up when you're running on short beam and hit the "pass" switch.
7)Self made adapter so that the stock H4 connector of the bike fits in.
8)Stock rear rubber seals used(the ones that wrap around the H4 bulb's metal base to keep humidity out of the HL assembly). The adapter sits perfectly in the same seals just like a H4 bulb's metal base would, thus ensuring air-tight seal.
9)The setup is placed in such a way that all the bulbs are accessible from outside through the stock bulb changing hole at the rear, no need to open the assembly to change burnt bulbs.

10)The best feature which I didn't find in any other retrofit, ADJUSTABLE beam. The difference between the high and low beam cannot be changed, but both together as a unit(either LHS unit or RHS unit) can be upped/lowered according to individual needs. The beams of both RHS and LHS can be panned horizontally too. All this can be done right from outside itself, using the stock adjustment screws!

11)Currently using some cheap-ass 55w bulbs in all the four. Plan to upgrade to xenons later. The current beam spread pattern and cut-off is great, but the bulbs suck..I got them for Rs.50 each for testing purpose. Continuing using them for the time-being,

12)All four projectors use H3 type bulbs.
13)Been running them since Monday, didn't face any battery issues until now.

i opened the faring and checked for any loose connection and tightned everything still there is no response...i doubt if water has gone inside the console if so what can be done.. svc guys are terrible..so iam trying to fix this myself...

@Digislayer: Hey bro even i have been trying for same kinda thing for last 3 months , i know i sound very sluggish, i think i must blame my work load for the same. Anyways coming to the point I have been trying to alot with the headlight, i have almost 8 pairs of angel/ devils eyes made from acrylic and few more things, which i thought on completion would post entire (DIY) Do It Yourself for our fellow Bhpians , so that they could do it by themselves and save money from other buggers who are selling it at wooping prices. Moreover i failed to do the above since i was unable to open the assembly i mean the glued one, i could not find an oven to fit the twin eyes so as to open it. Could you plz extend some help regarding the same? i mean how to open up the glued part and where can i get hot glue gun and all. last thing, will the skoda ppl give me the projector if i ask for?

AND OFCOURSE congarts and kudos for what you have done...

you seem to have everything ,but not done simple things like led pilot lamps & reg no plate removal

If water has really gone into the console, there's nothing much You can do actually..getting it replaced under warranty is the only thing you can do. The second best thing you can do is maybe detaching its connector, taking it indoors, and drying it thoroughly with a hair-dryer..which should be the last option in case you don't get a free replacement.


The only way water enering the console is while washing which the bike has gone through countless time...getting it replaced.. will it be available easily or do i have to wait for more than an a month for parts as previous experience with yammi taught me...do they stock these things...and i will make the last option as my first option then

I opened my HL assy with a good quality hair dryer dude..you won't believe I actually went to the extent of buying a hair dryer solely for this purpose! And you can get the hot glue gun at Koti, Gujrati Galli.

A blow dryer may be a bad idea..... it can melt away the circuit
Try keeping it in a bucket full of Rice.... yeah I said rice..... !

Rice absorbs the moisture like nobodies business


Oh and remember NOT to cook the console!

Thats the strangest advice ever...if nothing works i will revert to rice bowl method..and satyen u really made me laugh when i was annoyed to core thinking about yammi with the cooking part

Try keeping it in a bucket full of Rice.... yeah I said rice..... !

Rice absorbs the moisture like nobodies business