Announcement

**yamdoot** · 04-05-2012, 01:05 PM

Originally posted by vijaymeyou View Post

Doc its from yamaha RXG escorts workshop manual page no 67.

yes, thats what i meant. Its the same for RXG and 135.

**SriramEfunds** · 04-05-2012, 06:00 PM

Today thought would give myself some time to spend with the spares accumulated over a period of time. Not an easy job atleast for me. It is very very tiresome process segregating and aligning the parts with the respective areas, uff! It took good 2 hours for me organizing them. In meanwhile took this pic.

Later found that I have bought some parts without realizing it is already with me. So that was another process of removing the duplication of spares and keeping them separately. MY back was calling for SOS. Soon arranged them and kept the boxes in place.

If my health is good will handover the parts for painting. Big hope!

**asif** · 04-05-2012, 07:17 PM

Parts Parts everywhere and not a one to spare. Am jealous of your stock pile.
Sirram: How many bikes do you suggest can be completed with your stock of parts.

**SriramEfunds** · 04-05-2012, 09:02 PM

Originally posted by asif View Post

Parts Parts everywhere and not a one to spare. Am jealous of your stock pile.
Sirram: How many bikes do you suggest can be completed with your stock of parts.

Interestingly, all those parts just enough to complete ONE. May be few consumables goes into box as back up. The picture is missing some more from other room such as Chrome exhaust assembly, rims, tires, rear grab handle, handle bar, buttefly leg guard etc.

No one in my house like me or seeing any red colored boxes. It's a metal agony everytime I go home purchasing parts. I've been isolated and all they want is to move the boxes and couple of frames out of the house. I've requested to bear with me for sometime. I'm not joking but truth.

**vijaymeyou** · 04-06-2012, 01:10 AM

Hi Sriram,

Iam bringing some 68 spares for your Rx100 build

by tomorrow. clear some more space on your room

buddy.

Surprise is it will all come in a single 6" x6" box.... yes as assured iam bring you a full Rx grommet kit fully inspected.

along with fuel tank lid locking pin 1 No, swing arm bush 2 Nos and RX100 STD rings 1 set Imported yamaha packing 21 July 1995

**SriramEfunds** · 04-06-2012, 02:13 AM

Originally posted by vijaymeyou View Post

Hi Sriram,

Iam bringing some 68 spares for your Rx100 build

by tomorrow. clear some more space on your room

buddy.

Surprise is it will all come in a single 6" x6" box.... yes as assured iam bring you a full Rx grommet kit fully inspected.

along with fuel tank lid locking pin 1 No, swing arm bush 2 Nos and RX100 STD rings 1 set Imported yamaha packing 21 July 1995

Vijay thank you so much. Also, the tank lid locking pin comes with circlip?

Update: Bore kit:- A long story behind but in short negotiated a brand new G-3 barrel in 2009 packing.

Will post pictures when received.

Can some help me with neutral switch cap (black one)? Even used one would do. I'm only left with an option to steal from other bike in Chennai.

**Dinesh.P** · 04-06-2012, 04:17 AM

Originally posted by SriramEfunds View Post

Today thought would give myself some time to spend with the spares accumulated over a period of time. Not an easy job atleast for me. It is very very tiresome process segregating and aligning the parts with the respective areas, uff! It took good 2 hours for me organizing them. In meanwhile took this pic.

Later found that I have bought some parts without realizing it is already with me. So that was another process of removing the duplication of spares and keeping them separately. MY back was calling for SOS. Soon arranged them and kept the boxes in place.

If my health is good will handover the parts for painting. Big hope!

Sri ram you have a lot of spares are they RX 100 spares ?? looks great Red and Yamaha all over the room

**SriramEfunds** · 04-07-2012, 06:32 PM

A big Thanks to Vijay (vijaymeyou) for getting me full rubber kit including head bore rubbers, HTA full oil seal kit and Escorts-Yamaha piston rings says Imported for RX100 std size. It's packing date was 1995.

**yamdoot** · 04-07-2012, 10:00 PM

Originally posted by SriramEfunds View Post

A big Thanks to Vijay (vijaymeyou) for getting me full rubber kit including head bore rubbers, HTA full oil seal kit and Escorts-Yamaha piston rings says Imported for RX100 std size. It's packing date was 1995.

Nice find Sri. The price was nearly 400/- 17 years back! You can use them with even good TKRs if you cant find the Jap. piston.

**SriramEfunds** · 04-08-2012, 12:36 AM

Originally posted by yamdoot View Post

Nice find Sri. The price was nearly 400/- 17 years back! You can use them with even good TKRs if you cant find the Jap. piston.

Sorry Doc, I did not understand TKRs here.. I know TKRJ piston kit, is that what you mean? ART piston, I don't think could be possible at this era. So have decided to use the piston came along with bore. Can I use the above rings instead of Goetze?

**yamdoot** · 04-08-2012, 03:43 AM

Originally posted by SriramEfunds View Post

Sorry Doc, I did not understand TKRs here.. I know TKRJ piston kit, is that what you mean? ART piston, I don't think could be possible at this era. So have decided to use the piston came along with bore. Can I use the above rings instead of Goetze?

Yes thats the new name for TKR. Original ones are second only to ART. Ofc. u can use those rings with Goetze.

**dual disc 200** · 04-09-2012, 01:25 PM

Sriram, Congrats..! Good going there..! Have not been updating myself with the happenings as office work has increased to many folds. Anyway's, I can see almost everything needed for the restoration there. Have a quick question, i see an Amaron battery there, is it the maintenance free one? If yes, any specific reasons for that? I've heard a lot of dying stories about them not to able to cope up with the vintage charging system that Yamaha's have.

P.S. Would be needing couple of things in those boxes, for a restoration. Will call you once i've freed myself..!

**SriramEfunds** · 04-09-2012, 01:34 PM

Originally posted by dual disc 200 View Post

Sriram, Congrats..! Good going there..! Have not been updating myself with the happenings as office work has increased to many folds. Anyway's, I can see almost everything needed for the restoration there. Have a quick question, i see an Amaron battery there, is it the maintenance free one? If yes, any specific reasons for that? I've heard a lot of dying stories about them not to able to cope up with the vintage charging system that Yamaha's have.

Actually slow paced restoration should I say. That's Amaron 6ah MF for sure. Taken out from my ZMA. I don't want to waste a almost brand new battery, thought would use it on RX100 and see how is the performance.

P.S. Would be needing couple of things in those boxes, for a restoration. Will call you once i've freed myself..!

Call me anytime will help my best.

Update:-

Health stabilized. The required parts have entered the painter's work shop. Expected to get back this week before Tamil New Years day on Friday.

**dpak89** · 04-09-2012, 04:38 PM

^i have been using this Amaron MF for past 2 years. Its quite powerful but cant cope up with the high voltage feedback. So its life is limited to approximately one year(against the 5years warranty). But the one good thing is that it performs very well for that one year!
P.S: i used the warranty and replaced it with a new one after a year. But you have to fix it in a four stroke to claim warranty. So i used my caliber to claim.

**SriramEfunds** · 04-10-2012, 05:46 PM

Got some items back from plating works. Still there are few more to receive..

Activities planned for tomorrow:-

Getting wheels ready (rims, spokes, tires).
Visit to Paint shop to see the progress

Announcement

My dream - RX100 - Restoration

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment