Announcement

**BigBore** · 08-13-2011, 09:58 AM

Originally posted by SriramEfunds View Post

Thanks Alok.

@All:- Another question for the RX tires. I have bought Sirac Street 3.0 for the rear. Wondering what to buy for the front wheel?

OT:- There was an ad on the internet portal few days ago, RX100 Japanese Engine Rs. 44,000. So out of curiosity called to find out what has gone inside. He said it is 1987 model (wow!), since he sounded bit knowledgable, asked him what bore is it running, he said it is running on std E-2. Then quipped immediately that's 135 bore which is running on my 4 speeder. Then he mellowed a bit said it is converted to 135, 'Oh ok' so the crank assy should have changed too? He said, yes. Then asked him what is this bike Japanese is all about. He said it runs high speed touching 130s, asked how, he said light porting job was done. There was a silence, then he said ready to negotiate. I said your bike is not RX100 nor it is Japanese engine, he was like dumbstuck when I closed the call.

Sirac Street 3.00 x 18 works best for daily commuting (concrete & tar roads) as well as a bit on off roads. Would suggest you go for MICHELIN M62 Gazelle 2.75 x 18. I have them on 2 of my RX's. They work wonders

**dual disc 200** · 08-13-2011, 03:17 PM

Originally posted by SriramEfunds View Post

What could be more than your invite.

Right now my plan stays as scheduled so expect me to be in CBE 3rd noon.

Sure Sriram. Bike is ur's

Originally posted by BigBore View Post

Sirac Street 3.00 x 18 works best for daily commuting (concrete & tar roads) as well as a bit on off roads. Would suggest you go for MICHELIN M62 Gazelle 2.75 x 18. I have them on 2 of my RX's. They work wonders

+100!

**sanjithjoseph** · 08-14-2011, 09:09 AM

Is it possible to set TVS Apache's Front disc setup in RX100?

**arvindraju** · 08-14-2011, 11:33 AM

Originally posted by sanjithjoseph View Post

Is it possible to set TVS Apache's Front disc setup in RX100?

Go for a gladiator set up more straight forward

**sanjithjoseph** · 08-14-2011, 02:06 PM

Another RD caught by mobile cam @ Palarivattom, Cochin.

These days I use to see more no: of two strokes on cochin roads.. Yezdis, RDs, RXs ... think people are on the high flame of craze for two strokes ! . of-course no doubt they are heroes forever and the roaring sound of RXs rules.

**Rosh.Shogun** · 08-14-2011, 08:21 PM

Originally posted by sanjithjoseph View Post

These days I use to see more no: of two strokes on cochin roads.. Yezdis, RDs, RXs ... think people are on the high flame of craze for two strokes ! . of-course no doubt they are heroes forever and the roaring sound of RXs rules.

strokes are alwayz spl

**BigBore** · 08-15-2011, 11:24 AM

Originally posted by sanjithjoseph View Post

These days I use to see more no: of two strokes on cochin roads.. Yezdis, RDs, RXs ... think people are on the high flame of craze for two strokes ! . of-course no doubt they are heroes forever and the roaring sound of RXs rules.

Wow! This one is a treat for the eyes

**sanjithjoseph** · 08-15-2011, 11:58 PM

My RX100 is BACK

After a long time of 7 weeks( yes I felt it as a long gap without my machine

)now my RX100 is back with me. Today evening I got it back from workshop and completed almost 80% work. Rest is some paint Job, New Plated front mud guard, New oil pump, 90/100 wiring, new number plates. Here I'm posting some snaps of my RX which I had taken today evening using my crap mobile cam..+ some snaps at the workshop some 4 weeks back. If you have got some suggestions please post them...

snaps at the workshop..

snaps taken today...

**dual disc 200** · 08-16-2011, 12:27 AM

Beautiful Sanjith. Just a suggestion, pls. change ur front mudguard to the stock chrome one. Trust me, She'll look even more prettier. Btw. loved the Helmet lock & hunting one for mine.

**yamdoot** · 08-16-2011, 01:04 AM

Originally posted by sanjithjoseph View Post

After a long time of 7 weeks( yes I felt it as a long gap without my machine

)now my RX100 is back with me. Today evening I got it back from workshop and completed almost 80% work. Rest is some paint Job, New Plated front mud guard, New oil pump, 90/100 wiring, new number plates. Here I'm posting some snaps of my RX which I had taken today evening my crap mobile cam..+ some snaps at the workshop some 4 weeks back. If you have got some suggestions please post them...

Nice bike Sanjith. Go for a stock chrome fender like dualdisc said. your block seems to be painted silver without removing it from the engine. clean the block rubber dampers and remove the paint from them or get a new head and block rubber kit. Else almost everything is in order.
Your taillamp unit looks original and should be very old as the back plate of the light is chrome and not black and i havnt seen any in the last cpl of years. Take good care of it.

**sanjithjoseph** · 08-16-2011, 01:21 AM

Originally posted by dual disc 200 View Post

Beautiful Sanjith. Just a suggestion, pls. change ur front mudguard to the stock chrome one. Trust me, She'll look even more prettier. Btw. loved the Helmet lock & hunting one for mine.

Thanks a lot Mr.dual disc(Sorry for using the username) May i know your real name?,yeah for sure i will be going for front plated mudguards, may be in next week. I'm in search for the right side spring of the carrier and if I'm finding the Helmet lock on the way, will get it for you..

Originally posted by yamdoot View Post

Nice bike Sanjith. Go for a stock chrome fender like dualdisc said. your block seems to be painted silver without removing it from the engine. clean the block rubber dampers and remove the paint from them or get a new head and block rubber kit. Else almost everything is in order.
Your taillamp unit looks original and should be very old as the back plate of the light is chrome and not black and i havnt seen any in the last cpl of years. Take good care of it.

Thanks Nitesh, Yes ...stock chrome fender its there in my plan. Thanks for your other suggestions too, will take care of that too. The tail lamp is a very old one I suppose, Its written 'Rajdoot India' on that. And I have got a Side box which was sold with Rxs in 80s as extra accessory. Its not like ordinary side boxes, a very compact one. But I think side boxes are not at all necessary for RXs(not matching)..what do you think?. And I thought of changing the crash guard to butterfly one...but many suggested me to keep the present one, what they are saying is like, for black RX the straight rod is matching better.

**yamdoot** · 08-16-2011, 01:48 AM

Originally posted by sanjithjoseph View Post

Thanks Nitesh, Yes ...stock chrome fender its there in my plan. Thanks for your other suggestions too, will take care of that too. The tail lamp is a very old one I suppose, Its written 'Rajdoot India' on that. And I have got a Side box which was sold with Rxs in 80s as extra accessory. Its not like ordinary side boxes, a very compact one. But I think side boxes are not at all necessary for RXs(not matching)..what do you think?. And I thought of changing the crash guard to butterfly one...but many suggested me to keep the present one, what they are saying is like, for black RX the straight rod is matching better.

Yes, a butterfly guard always looks the best on any RX and yes the side box does not suit the RX at all!

**dual disc 200** · 08-16-2011, 12:39 PM

Originally posted by sanjithjoseph View Post

Thanks a lot Mr.dual disc(Sorry for using the username) May i know your real name?,yeah for sure i will be going for front plated mudguards, may be in next week. I'm in search for the right side spring of the carrier and if I'm finding the Helmet lock on the way, will get it for you.

Thank you so..much for the help rendered Sanjith. You can call me Ram.

Originally posted by yamdoot View Post

Yes, a butterfly guard always looks the best on any RX and yes the side box does not suit the RX at all!

+100

**BigBore** · 08-16-2011, 01:24 PM

Originally posted by sanjithjoseph View Post

After a long time of 7 weeks( yes I felt it as a long gap without my machine

)now my RX100 is back with me. Today evening I got it back from workshop and completed almost 80% work. Rest is some paint Job, New Plated front mud guard, New oil pump, 90/100 wiring, new number plates. Here I'm posting some snaps of my RX which I had taken today evening using my crap mobile cam..+ some snaps at the workshop some 4 weeks back. If you have got some suggestions please post them...

snaps at the workshop..

snaps taken today...

That's a beautiful RX100 Sanjith, Congrats! As Ram and Nitesh suggested go for the stock chrome front fender will look great

Cheers!!

**BigBore** · 08-16-2011, 01:29 PM

Originally posted by sanjithjoseph View Post

After a long time of 7 weeks( yes I felt it as a long gap without my machine

)now my RX100 is back with me. Today evening I got it back from workshop and completed almost 80% work. Rest is some paint Job, New Plated front mud guard, New oil pump, 90/100 wiring, new number plates. Here I'm posting some snaps of my RX which I had taken today evening using my crap mobile cam..+ some snaps at the workshop some 4 weeks back. If you have got some suggestions please post them...

snaps at the workshop..

snaps taken today...

That's a beautiful RX100 Sanjith, Congrats! As Ram and Nitesh suggested go for the stock chrome front fender will look great

Will try and find out if i can get the springs for the carrier! I have a brand new carrier with me!

Cheers!!

Announcement

2-Stroke Indian Bikes.....

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment