Since '02 xBhp is different things to different people. From a close knit national community of bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker friends. Join us

Castrol Power 1

All the gear all the time (ATGATT).

Our Partner

Announcement

Collapse
No announcement yet.

Yamaha FZ-16/ FZ-S

Collapse
X
 
  • Filter
  • Time
  • Show
Clear All
new posts

  • Re: Yamaha FZ-16/ FZ-S

    Originally posted by Aakash Singh View Post
    You have to press the seat from front, so that seat grove fits in the metal projection. See seat where the metal projection goes in if not broken.
    Thanks a lot for the reply , will check this today.

    Edit: Thanks it worked. I had to press the seat harder to get the grove get into position.
    Last edited by eagle06; 08-26-2016, 12:33 PM.

    Comment


    • Re: Yamaha FZ-16/ FZ-S

      So I started my bike after a month long break, given her oil leak. Did jugad at home to stop the leak myself for the time being and filled new engine oil. Road for a few kms, but the ride was too jerky with rpm going haywire along with strange hollow sounds coming from the exhaust.
      Need to spend some money on her to bring her back to her glory.

      Ride safe and have fun.
      Regards
      Nadeem

      Comment


      • Re: Yamaha FZ-16/ FZ-S

        Originally posted by Kartik Shetty View Post
        What type of bulb does fz use for headlights?
        Osram or Halonix or Philips HS1 35/35w Halogen
        Regards
        Saikat

        Comment


        • Re: Yamaha FZ-16/ FZ-S

          When changing engine oil from mineral to full synthetic , is engine flusher is required or just empty old oil and use new one??

          Comment


          • Re: Yamaha FZ-16/ FZ-S

            Originally posted by eagle06 View Post
            When changing engine oil from mineral to full synthetic , is engine flusher is required or just empty old oil and use new one??
            It isn't required. Just drain the old oil and fill new one.
            The real beauty lies in throttle's twist!!

            Headlight can be replaced, Head cannot be. Wear a helmet.

            Comment


            • Re: Yamaha FZ-16/ FZ-S

              Plese guide me.
              I have yamaha fz16 bike. Today I try to open Front sprocket cover to clean front sprocket. But front sprocket cover bottom bolt was very hard so by applying too much fotce boltholder got breakdown . I dont know the name of that part. I attached picture of damaged part. Please let me know the name of that part and from where i can get that part? Red circled part is broken.
              Attached Files

              Comment


              • Re: Yamaha FZ-16/ FZ-S

                Sorry for duplication
                Last edited by Bhavesh Savaliya; 09-05-2016, 07:10 PM.

                Comment


                • Re: Yamaha FZ-16/ FZ-S

                  From where i can get the part circled in the attached photo. Plese guide me regarding the name and part no. for that spare part. I cant close front sprocket cover. Can I get that part online? Please guide me
                  Attached Files

                  Comment


                  • Re: Yamaha FZ-16/ FZ-S

                    Originally posted by Bhavesh Savaliya View Post
                    From where i can get the part circled in the attached photo. Plese guide me regarding the name and part no. for that spare part. I cant close front sprocket cover. Can I get that part online? Please guide me
                    If I'm not wrong that's welded to the base (engine).
                    If so, you won't get it.

                    Did you managed to break it ?
                    First I was Scared But then We Made a Deal
                    --


                    ♥ Biker Forever ♥ xBhp ♥ Throttle Hunger ♥ Accidental Body ♥ Bike Changer ♥ Pc Lover ♥ Gadget Freak ♥

                    Comment


                    • Re: Yamaha FZ-16/ FZ-S

                      My right fork is leaking oil. What all needs to be changed? Can somebody guide me please.
                      The real beauty lies in throttle's twist!!

                      Headlight can be replaced, Head cannot be. Wear a helmet.

                      Comment


                      • Re: Yamaha FZ-16/ FZ-S

                        Originally posted by Bhavesh Savaliya View Post
                        Plese guide me.
                        I have yamaha fz16 bike. Today I try to open Front sprocket cover to clean front sprocket. But front sprocket cover bottom bolt was very hard so by applying too much fotce boltholder got breakdown . I dont know the name of that part. I attached picture of damaged part. Please let me know the name of that part and from where i can get that part? Red circled part is broken.
                        It's not broken. It's the bolt that is broken and half still inside. Go to some lathe or workshop and take it out and put a new bolt.
                        #RetiredRider
                        #KeyboardWarrior

                        Comment


                        • Re: Yamaha FZ-16/ FZ-S

                          Originally posted by devils_friend View Post
                          My right fork is leaking oil. What all needs to be changed? Can somebody guide me please.
                          Oil and seal. Change both sides together.
                          #RetiredRider
                          #KeyboardWarrior

                          Comment


                          • Re: Yamaha FZ-16/ FZ-S

                            Originally posted by deville_56 View Post
                            Oil and seal. Change both sides together.
                            I have to change the whole oil seal set or changing one particular seal will be good?
                            The real beauty lies in throttle's twist!!

                            Headlight can be replaced, Head cannot be. Wear a helmet.

                            Comment


                            • Re: Yamaha FZ-16/ FZ-S

                              Originally posted by Bhavesh Savaliya View Post
                              From where i can get the part circled in the attached photo. Plese guide me regarding the name and part no. for that spare part. I cant close front sprocket cover. Can I get that part online? Please guide me
                              What happened exactly?
                              Did the threads in those holes wear out? Then excessive force was applied while tightening the bolts. I think 10Nm is recommended force, i.e. about using two fingers (not the wrist-force) on T-Spanner.

                              Is that part completely removable? I can't make it out from the parts catalogue.

                              Originally posted by devils_friend View Post
                              I have to change the whole oil seal set or changing one particular seal will be good?
                              It's better to replace on both forks if they both had similar mileage on them; if not then it's shoddy work during last oil-seal replacement.

                              You've the check the condition of
                              - Oil-Seal
                              - Oil-Seal-Washer
                              - Dust-Seal
                              - Snap-Ring

                              How many kms have you done on that fork oil? You can change fork-oil if you've crossed say 10k kms.
                              Last edited by Freak inExile; 09-06-2016, 11:45 AM.
                              ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
                              Join https://www.hattrick.org/ to manage a virtual football club from India. Nearly 300,000 managers from 128 countries fighting to make their mark.

                              Comment


                              • Re: Yamaha FZ-16/ FZ-S

                                [QUOTE=Freak inExile;1251601]What happened exactly?
                                Did the threads in those holes wear out? Then excessive force was applied while tightening the bolts. I think 10Nm is recommended force, i.e. about using two fingers (not the wrist-force) on T-Spanner.

                                Is that part completely removable? I can't make it out from the parts catalogue.



                                It's not removable

                                Comment

                                Working...
                                X