Announcement

**devils_friend** · 09-06-2016, 12:11 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by Freak inExile View Post

It's better to replace on both forks if they both had similar mileage on them; if not then it's shoddy work during last oil-seal replacement.

You've the check the condition of
- Oil-Seal
- Oil-Seal-Washer
- Dust-Seal
- Snap-Ring

How many kms have you done on that fork oil? You can change fork-oil if you've crossed say 10k kms.

It has run well over 10k kms. Need to replace things ASAP.

**Kartik Shetty** · 09-06-2016, 03:36 PM

Re: Yamaha FZ-16/ FZ-S

Any idea about the cost of the front tires? Bike is 4yr old with 34k kms but threads look good.. Should I change it?

**kesavRrulez** · 09-06-2016, 05:31 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by Kartik Shetty View Post

Any idea about the cost of the front tires? Bike is 4yr old with 34k kms but threads look good.. Should I change it?

Yes. You can change the tyres, quality of the tyres will be gone now
Cost is about 2.6k for MRF.
there are many brands with different prices in market.

**Bhavesh Savaliya** · 09-06-2016, 11:07 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by Sird View Post

If I'm not wrong that's welded to the base (engine).
If so, you won't get it.

Did you managed to break it ?

Then what should be done to close front sprocket cover?

**accuengineer** · 09-08-2016, 01:28 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by Bhavesh Savaliya View Post

Then what should be done to close front sprocket cover?

hai
Like [MENTION=16677]deville_56[/MENTION] has already pointed out the solution. The bracket you have encircled in red is a part of the engine bay compartment. The bolt that you tried to open must have rusted and that is the reason it did open freely and sheared in half due to over torque applied for opening. Now you need to take your bike to a lathe/welding shop. They will weld a small rod on the broken bolt and remove the bolt. Or they might use a drilling machine and drill in anticlockwise rotation and remove the broken bolt.

Cheers

Mathews

**Aakash Singh** · 09-08-2016, 03:14 PM

Re: Yamaha FZ-16/ FZ-S

can anyone please share the measured level of co and hc from their pollution receipt.
Mine was previous/current
co .92/.6 out of 3
hc 162/1300 out of 3000
They said that emission is very high.

**rugved** · 09-08-2016, 03:20 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by Aakash Singh View Post

can anyone please share the measured level of co and hc from their pollution receipt.
Mine was previous/current
co .92/.6 out of 3
hc 162/1300 out of 3000
They said that emission is very high.

unless you see smoke emanating from the exhaust the reading could be faulty. check at some other place too

**Bhavesh Savaliya** · 09-08-2016, 09:45 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by accuengineer View Post

hai
Like [MENTION=16677]deville_56[/MENTION] has already pointed out the solution. The bracket you have encircled in red is a part of the engine bay compartment. The bolt that you tried to open must have rusted and that is the reason it did open freely and sheared in half due to over torque applied for opening. Now you need to take your bike to a lathe/welding shop. They will weld a small rod on the broken bolt and remove the bolt. Or they might use a drilling machine and drill in anticlockwise rotation and remove the broken bolt.

Cheers

Mathews

Thanks bro

**Aakash Singh** · 09-08-2016, 11:16 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by rugved View Post

unless you see smoke emanating from the exhaust the reading could be faulty. check at some other place too

The smoke only comes at very high rpm 9k to 10k

**vimal_hbk** · 09-09-2016, 09:38 AM

Re: Yamaha FZ-16/ FZ-S

Hello Frnds... Logging in after a long time.

I had to move out of India for job related matters. and i had kept my love (Fazer - Cyber green) in a safe place. And i returned for vacation and i am so happy that i really didn't have any issues with the engine, pick up and braking. only thing was battery and it also got better as i started riding it (topped with Battery water)

So the point is, Kamla Yamaha at Sewree was the usual place i used to visit to service my bike and they used to do pretty good job. for some reason they are no longer in service. As i had to return back i chose to service it from a local workshop. He too did everything perfect except for messing with the front disc brakes.

the front Tyre is not freely rotating as the brakes are jammed. he tried pushing the piston back, it went, but as soon as I slam the brake the piston doesn't return to its original position and thus tyre doesnt rotate freely i hear this screech noise. He tried everything from insanely hammering the brake calipers till changing the brake pads.

guys could you please help what am i missing here ... i really love my bike and i don't wish to give her away for any reason. Probably i should try Brake fluid bleeding? Is it causing the piston to get stuck and obstructing the Tyre rotation?

**munavarsharfas** · 09-12-2016, 08:29 AM

Re: Yamaha FZ-16/ FZ-S

Small screech sound is normal in every bike.

**devils_friend** · 09-12-2016, 04:46 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by vimal_hbk View Post

Hello Frnds... Logging in after a long time.

I had to move out of India for job related matters. and i had kept my love (Fazer - Cyber green) in a safe place. And i returned for vacation and i am so happy that i really didn't have any issues with the engine, pick up and braking. only thing was battery and it also got better as i started riding it (topped with Battery water)

So the point is, Kamla Yamaha at Sewree was the usual place i used to visit to service my bike and they used to do pretty good job. for some reason they are no longer in service. As i had to return back i chose to service it from a local workshop. He too did everything perfect except for messing with the front disc brakes.

the front Tyre is not freely rotating as the brakes are jammed. he tried pushing the piston back, it went, but as soon as I slam the brake the piston doesn't return to its original position and thus tyre doesnt rotate freely i hear this screech noise. He tried everything from insanely hammering the brake calipers till changing the brake pads.

guys could you please help what am i missing here ... i really love my bike and i don't wish to give her away for any reason. Probably i should try Brake fluid bleeding? Is it causing the piston to get stuck and obstructing the Tyre rotation?

Change the master cylinder kit and things will be back to normal. Bleed the brake later once the kit is installed amd make sure that the brake pads are installed properly.

**unni3107** · 09-14-2016, 02:24 PM

Re: Yamaha FZ-16/ FZ-S

Can anybody help me to identify this part and fix it?

Attached Files

**kesavRrulez** · 09-15-2016, 11:21 AM

Re: Yamaha FZ-16/ FZ-S

Originally posted by vimal_hbk View Post

Hello Frnds... Logging in after a long time.

I had to move out of India for job related matters. and i had kept my love (Fazer - Cyber green) in a safe place. And i returned for vacation and i am so happy that i really didn't have any issues with the engine, pick up and braking. only thing was battery and it also got better as i started riding it (topped with Battery water)

So the point is, Kamla Yamaha at Sewree was the usual place i used to visit to service my bike and they used to do pretty good job. for some reason they are no longer in service. As i had to return back i chose to service it from a local workshop. He too did everything perfect except for messing with the front disc brakes.

the front Tyre is not freely rotating as the brakes are jammed. he tried pushing the piston back, it went, but as soon as I slam the brake the piston doesn't return to its original position and thus tyre doesnt rotate freely i hear this screech noise. He tried everything from insanely hammering the brake calipers till changing the brake pads.

guys could you please help what am i missing here ... i really love my bike and i don't wish to give her away for any reason. Probably i should try Brake fluid bleeding? Is it causing the piston to get stuck and obstructing the Tyre rotation?

Service the caliper, change the o rings inside the caliper, change the master cylinder kit.

**accuengineer** · 09-15-2016, 01:00 PM

Re: Yamaha FZ-16/ FZ-S

Originally posted by unni3107 View Post

Can anybody help me to identify this part and fix it?

That is the connecting tube for resonator.

Cheers

Mathews

Announcement

Yamaha FZ-16/ FZ-S

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment