How much it will cost for cbr s front master cyilender
Announcement
Collapse
No announcement yet.
Honda CBR 250R
Collapse
X
-
Re: Regarding payment proof of second hand bike
Hey, I know when it has to be done, usually I use this as one of the metrics to check if the mechanic is good enough, if they continue arguing that such does not exist/ the bike having only an oil filter, I would usually avoid them.Originally posted by B7ACKTHORN View PostVJ
Comment
-
Re: Honda CBR 250R
Negotiate bro. Asking price is too high. I got dec 2014 model (abs) 17k on ODO for 85k.Originally posted by Nanda SS View PostI found two pre-owned cbrs please advise me to which one to choose:
1. 2015 22000kms abs single owner, 1,35,000 INR...
2. 2014 38000kms abs second owner, 95,000 INR...
Comment
-
-
Re: Honda CBR 250R
Guys noticed something odd, before my bike usually shows a lower fuel level earlier which rises to a higher level after the engine has warmed up, after replacing my fuel pump relay and fan relay, bike shows a higher fuel level which goes down to a normal fuel level, I know this is not an issue and my fuel sensor seems to be working fine, showing the right fuel level, just a bit confused, that's all.
Comment
-
Re: Honda CBR 250R
Any change in the place/position in which you park the bike?Originally posted by Deathwing View PostGuys noticed something odd, before my bike usually shows a lower fuel level earlier which rises to a higher level after the engine has warmed up, after replacing my fuel pump relay and fan relay, bike shows a higher fuel level which goes down to a normal fuel level, I know this is not an issue and my fuel sensor seems to be working fine, showing the right fuel level, just a bit confused, that's all.
My guess is change in the ground elevation (incline or descent) from where you park the bike can cause this.
Comment
-
-
Re: Honda CBR 250R
Hi everyone,
Today morning I was travelling at a speed of 40 Kmph. The car travelling in front applied brakes suddenly and even though I applied both the brakes (which I do usually) still the bike skidded and I fell. Luckily no injuries to me or bike(just the gear level alone pressed inside)
But recalling the incident later there's no way the bike should have skidded (there's been many instance where the same kind of things happened but it never skidded) because there was no sand dunes on road or neither I was travelling beyond the brake power.
Oh and btw It's not a tarmac road, it's a concrete/cement based one.
Do I need to check my brake pads for wear and tear?
Current ODO - 12600 Kms / 10 Months old.Apache RTR 180 (The Valentine) 2012 - 2016
RC 200 (The GRUNTER) 2016 - 2016
CBR 250R (F.R.I.D.A.Y) 2017 - Present
CBR Ride to Pichavaram
Comment
-
Re: Honda CBR 250R
Happened to me twice due to corroded brake pistons. Lost a mirror due to that. Now I jam the back brakes before touching the front brakes.Originally posted by sstherockz View PostHi everyone,
Today morning I was travelling at a speed of 40 Kmph. The car travelling in front applied brakes suddenly and even though I applied both the brakes (which I do usually) still the bike skidded and I fell. Luckily no injuries to me or bike(just the gear level alone pressed inside)
But recalling the incident later there's no way the bike should have skidded (there's been many instance where the same kind of things happened but it never skidded) because there was no sand dunes on road or neither I was travelling beyond the brake power.
Oh and btw It's not a tarmac road, it's a concrete/cement based one.
Do I need to check my brake pads for wear and tear?
Current ODO - 12600 Kms / 10 Months old.
Comment
-
Re: Honda CBR 250R
My friend, for your bad luck even if there was a small stone, this will happen. I think most of us experienced this, it happens in a fraction of second.Originally posted by sstherockz View PostHi everyone,
Today morning I was travelling at a speed of 40 Kmph. The car travelling in front applied brakes suddenly and even though I applied both the brakes (which I do usually) still the bike skidded and I fell. Luckily no injuries to me or bike(just the gear level alone pressed inside)
But recalling the incident later there's no way the bike should have skidded (there's been many instance where the same kind of things happened but it never skidded) because there was no sand dunes on road or neither I was travelling beyond the brake power.
Oh and btw It's not a tarmac road, it's a concrete/cement based one.
Do I need to check my brake pads for wear and tear?
Current ODO - 12600 Kms / 10 Months old.
Comment
-
Re: Honda CBR 250R
Please do a complete overhaul sir... It might workOriginally posted by leech View PostHappened to me twice due to corroded brake pistons. Lost a mirror due to that. Now I jam the back brakes before touching the front brakes.Apache RTR 180 (The Valentine) 2012 - 2016
RC 200 (The GRUNTER) 2016 - 2016
CBR 250R (F.R.I.D.A.Y) 2017 - Present
CBR Ride to Pichavaram
Comment
-
Re: Honda CBR 250R
Yeah bro maybe my bad luck...Originally posted by yathi View PostMy friend, for your bad luck even if there was a small stone, this will happen. I think most of us experienced this, it happens in a fraction of second.Apache RTR 180 (The Valentine) 2012 - 2016
RC 200 (The GRUNTER) 2016 - 2016
CBR 250R (F.R.I.D.A.Y) 2017 - Present
CBR Ride to Pichavaram
Comment
-
Re: Honda CBR 250R
Hi all,
I am keen install a indicator inbuilt rear view mirror. I can see that a decent set is available on Amazon as below link. But while researching more I saw a comment from a CBR rider where he ordered similar one via Ali express, also said the negative point as it's not having enough length, rear visibility is poor. Any advise or suggestions?Imported 2pcs LED Turn Signal Mirror For Suzuki Hayabusa Katana GSXR 600 1000 https://www.amazon.in/dp/B01FZ0ROYE/..._YprpAbTZYXQ0F
Comment
-
Re: Honda CBR 250R
Hi just a query I know it's not possible but what if I get the ABS kit including Front wheel assembly includes rim,tyre,abs disc ,caliper ,fork(suspension) mudgaurd, Rear Wheel assembly includes rim ,tyre, Sprocket , disc from a used bike and want to convert non ABS to ABS is it possible?
Comment



Comment