Tweet
Re: Yamaha FZ16 version 2.0
Can someone please share what would be the price of the rear tire hugger ?
(Mudguard)
Can someone please share what would be the price of the rear tire hugger ?
(Mudguard)
-
-
Re: Yamaha FZ16 version 2.0
when the engine was new ... engine used to get heated after an hour of 80 - 90 kmph riding.Originally posted by djmacpro View Post
These days I see my bike perform the same even without breaks ... i was runnning mineral Yamalube. Recently shifted to Motul 7100 20W 50 . Will post the perfromance update soon.Comment
-
Regards
Saikat
Comment
-
Re: Yamaha FZ16 version 2.0
Motul 7100 20w50 is very sluggish. Motul 300v is very good.Originally posted by bobisbacktorock View PostRegards
Saikat
Comment
-
Re: Yamaha FZ16 version 2.0
Thanks very usefulOriginally posted by saikatbyte View Post
I wouldn't have gone down to xbhp >motorcycle ownership experience> fz v2.0
If i havent searched there already
Its like "hey i am not feeling well"
"Go see a doctor"Comment
-
Re: Yamaha FZ16 version 2.0
Hi. What was the best speed for or rpm limit for long ride???Comment
-
Re: Yamaha FZ16 version 2.0
Keep it between 5k to 7k rpm...Originally posted by munavarsharfas View PostComment
-
Re: Yamaha FZ16 version 2.0
Engine oil ....sluggish ?? Are we talking about viscous drag ?Originally posted by saikatbyte View PostComment
-
Re: Yamaha FZ16 version 2.0
Changing engine oil to motul would void warranty right ???Originally posted by bobisbacktorock View PostComment
-
Yamaha FZ16 version 2.0
6000 rpm is safeOriginally posted by munavarsharfas View Post
8000 rpm is limitRegards
Saikat
Comment
-
Re: Yamaha FZ16 version 2.0
Yes. My bike is anyways not in warranty as i did not get the free services done. I service my bike myself.Originally posted by ronit1992 View PostComment
-
Re: Yamaha FZ16 version 2.0
Hi Experts,
Appreciate if you could shed some Light on the following subject.
I am close to 9000 Kms on the ODO of my Fz V2.
If I use this do you think there will be any forseeable problems?
It is Is Bardhal injector Clean.
Bardahl Special Injector Klene (200 ml): Amazon.in: Car & Motorbike
I had used this for the carb on my Old Pulsar? and one could feel the fuel jets clean, with a noticeably smoother ride.
There are no issues on my FZ for now, I was only looking at "Preventive Maintenance"
Aprreciate your knowledgeable inputs.Last edited by Biker007; 08-06-2016, 08:56 PM.Comment
-
Re: Yamaha FZ16 version 2.0
Buy system g from bp...use it one ml per liter...its trusted product..cycle it every alternate fuel tanks.. i too felt difference in smoothness ...mine was 11000km oldOriginally posted by Biker007 View PostComment
-
Re: Yamaha FZ16 version 2.0
I don't think there would be any adverse effect on the engine except some carbon on exhaust.Originally posted by Biker007 View Post
As for preventive measurement, consider riding Wide Open Throttle bursts occasionally on a safe stretch of roads(highway) to keep gunk away from your injectors.
My Fazer v2 has done 12800 kms and the injectors are doing just fine.
----consecutive posts auto-merged-----
I don't think there would be any adverse effect on the engine except some carbon on exhaust.Originally posted by Biker007 View Post
As for preventive measurement, consider riding Wide Open Throttle bursts occasionally on a safe stretch of roads(highway) to keep gunk away from your injectors.
My Fazer v2 has done 12800 kms and the injectors are doing just fine.
----consecutive posts auto-merged-----
75 - 95 kmph Best speed zone.Originally posted by munavarsharfas View PostComment
-
Re: Yamaha FZ16 version 2.0
Could you give me the following data?Originally posted by bobisbacktorock View Post
At 4k, 4.5k, 5k rpm respectively in 5th gear, stock condition, what speeds does the fazer fi do?
How does it tackle headwinds and crosswinds?
What mileage could be expected if the bike is ridden in the above said rpm?
Is it necessary to replace the oil filter once in every 2.5k kms?
ThanksComment
Comment