Re: Got rid of the Stock mirrors of my RS200

Re: Got rid of the Stock mirrors of my RS200

Man.. Your bike looks stunning..

Thanks for the info.

Re: Got rid of the Stock mirrors of my RS200

Sorry bro..
This is not my bike, this bike if from a RS group called Racing Fenix.
See the mirrors in another angle.
Also see the rear tyre 150/60 Michelin PSR.

Re: Got rid of the Stock mirrors of my RS200

Oh thats ok bro.


The tyres looks amazing bro. But it may affect the performance i guess.

We were talking about the new mirrors.

Actually 2017 pulsar has the same mirror like ours. My friend has just seen the 2017 pulsar. Also check the website bro.

Re: Got rid of the Stock mirrors of my RS200

Ask him which colour bike he saw?
Because the Red,yellow and black (older colours) has been discontinued.
If not the new graphite grey or white-blue, then its an old stock.

Re: Got rid of the Stock mirrors of my RS200

Yeah yeah.. I too heard. He saw the blue one.

Re: Got rid of the Stock mirrors of my RS200

that sounds fishy.
because on all videos and pics i Saw the new mirror.

Re: Got rid of the Stock mirrors of my RS200

I will confirm bro.. Bajaj showroom is near to house only. I will confirm once it hits the showroom.

Re: Bajaj Pulsar RS 200 Owners Review and Experience

Guys my pulsar rs 200 front mudguard got a small hit. And a small piece beside the abs logo, crack and bent. Should I change the whole mudguard or is there any jugad can be done? I really wish to get rid of it as it is infront of the bike and clearly visible.

P.S.- How can i attach a picture?

Re: Bajaj Pulsar RS 200 Owners Review and Experience

I had a similar issue years ago with my Karizma. A local mechanic fixed the issue by using a quickfix and shreds of cloth piece. He put a very small fiber of cloth between cracks and sealed it by using quickfix. Called it "plastic welding". Not sure if that really means anything but this solution worked wonders for me. Pretty - no. Useful - Definitely!

Re: Bajaj Pulsar RS 200 Owners Review and Experience

I had my pulsar serviced about 2 months ago. The ABS light would switch ON after riding few kms since then. Then I went to another service center and asked them to locate the fault in ABS system and repair it no matter what the cost. They told me, everything was OK with ABS, and they have fixed the light ON issue and did not charge anything for it. Soon after I took my bike out of service center, after riding 10kms My ABS light again got switched ON. The light will glow after riding few kms every single time. Has anyone faced such problem? Why is this happening? What should I do? The nearest Bajaj service center that services RS200 is 40km away from where I live. Any help on this topic will be appreciated.

Re: Bajaj Pulsar RS 200 Owners Review and Experience

If the damage is extensive I would recommend getting a new mudguard. Any repair done to the damage will surely make it look ugly and it will stick out like a sore thumb.


When you reply there is a paperclip icon, click that and then choose from where the image is stored. At least it's this way on the Tapatalk app, don't know about desktop/other apps.

Cheers.

Re: Bajaj Pulsar RS 200 Owners Review and Experience

Had faced this issue.
And it happens particularly, if one goes about 40/50 KMPH.
The rear abs ring / sensor is faulty here.
Could be that the sensor isn't functioning or that the rear ABS ring has bent at some place.
Pls get that checked. Should be resolved hopefully.

Re: Bajaj Pulsar RS 200 Owners Review and Experience

HI Guys,

I have done a small modification on tail light assembly.

To mount the LED unit, indicator, number plates I have used NS200 mounting bracket. I coloured the bracket with black spray paint.
The LED unit is handmade by using LED strips , ruler ,some plastics and black insulation tapes.

Making of LED unit: (Tail light)

When you buy the LED strip it will come as a roll. We need to cut as per our requirements. I cut the led strips in 3 parts (6 LEDs each).
Arranged the strips in 3 rows as shown in the picture. The plastic part I chosen from the old engine oil can I cut and used it for this.

The strip has adhesive on its back so it will be useful to stick it. I arranged those strips as shown in the picture. The strip came with full white color so I have pasted insulation tape over them except LED portion. (If you have black spray paint you can use it- Make sure that you putting proper mask to the LEDs)

Cut the ruler as per the size and keep some support between ruler and the plastic part. After finishing use the insulation tape and make the final shape.

I used some resistor to make tail light dim and bright for brake application.

I bought LED strip in 5m length and costed me Rs.400. Insulation tape Rs.10. Ruler Rs.15. The remaining LED roll can be used for some other application.

Apologize I missed some of the steps. I hope you people can understand, since it is a very small mod.

Re: Bajaj Pulsar RS 200 Owners Review and Experience

Looking better than the stock set up 😁👏👏