Announcement

**prashanth.rva** · 02-06-2016, 09:11 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by SatSon View Post

Nice pics.

Just reminds me of my college days, when every other Splendor in college had a short handlebar like yours

It gives a cute look to the bike.
I also wanted to have it fitted in my bike, but my dad refused saying it will cause clutch wire to get stuck, not so comfortable riding position etc etc

This handle was very much popular with Splendor in Kerala that time, but not much seen these days...

----consecutive posts auto-merged-----

Originally posted by Pinaki View Post

Doing fine brother .. long time no signs from you

Welcome to the forum brother ....

... I have the same rear tyre on my bike as yours , mrf nylogrip moto-C 2.75x18 . Very good road/no-road dual-purpose tyre but now discontinued I think ?

----consecutive posts auto-merged-----

Originally posted by dude_creative View Post

Cool bike from y2k, mine is 2 yrs older model.

8mm is sufficient for beginning, to open clutch cover, magneto cover in splendor. Ring spanner is the one that is frequently used for other sizes. Box spanner is perfect for spark plug inspection, footrest removal stuffs.

...Multimeter-check battery volts, resistance etc

The last one: Red Screwdriver like looking - is the tool used to remove a small screw/thread inside the tubes air valve.

I have used Waxpol after wash. Its really good. Bike looks very shiny.

Few friends told Rubbing compound also very shiny. Once I simply I applied on tank and hand buffed it. I didn't feel any difference.

Attached Files

**dude_creative** · 02-06-2016, 10:35 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by prashanth.rva View Post

I have heard WD40 but don’t know its uses. Please let me know where & for what purpose it is used. Please post a pick of WD40 if you have.

Also where ‘Gasket Maker’ will be useful – so that I will buy & use it when required.

bro, you have very good collection
here is a pic of wd40 with uses on it. Loosen bolts is the main advantage of this , and cleaning rust in metals, chains etc . Locks with rust also becomes smooth by wd40

You should use anabond gasket thin film, if u find the oil leaks after opening the engine cases.
Generally applied over clutch cover, valve cover edges. It will harden like a rubber thru a process called RTV room temperature vulcanization in few hours.

**Pinaki** · 02-07-2016, 12:43 AM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Nice tools brother Prashant , I shall try to post pics of mine sometime soon , we all love our tools here

. Good to see that you are careful to use safety glass .

Originally posted by prashanth.rva View Post

.. Many people are also telling the short handlebars are not very good, we will get some problems and it will affect the clutch & front break. Please tell me if it has problems, I will change it to new Standard handlebar...

If handlebar length difference is not causing any one the things mounted on it like clutch cable , front brake cable etc to snag or become too short to allow free full swing of the handle bar from left to right without pulling on the cable , providing adequate control at all speeds road & traffic conditions , a clear rear-view on the RV-mirrors and be comfortable for you - all is well .

Originally posted by prashanth.rva View Post

.. I have heard WD40 but don’t know its uses. Please let me know where & for what purpose it is used. Please post a pick of WD40 if you have...

WD-40 is a water displacing light penetrating oil and lubricant available in convenient aerosol spray . Useful for unlocking rusted bolts and things and gives light film of lubrication & prevents further rust . It is very convenient because you can reach difficult deep spots with a straw-extension attached to spray can . I have a small canister of it but for use in electronics repairs , not bike - bike needs heavier oil like motor-oil or gear-oil for lubrication of mechanical parts. A similar one is Zorrik from pidilite . I have made it a habit to lubricate every nut , bolt or screw fastener with light film of grease or oil whenever I open them , so I never got any stuck bolts etc on the bike . Though I have never done , but wd-40 is a good for one thing - to spray to the electrical contacts & switches etc on the bike wiring to keep off corrosion .

Originally posted by prashanth.rva View Post

‘Water Service Jet Spray’ – A very nice tool to wash. I will have to roam & search for this particular tool. I will keep you posted on this once I get this tool..

Just get a good length of flexible pipe like a plastic garden hose , a plastic water sprayer nozzle and 2 hose clamps to fix tightly . Kaafi hain

; should not use high force water jet on bike as it causes problems , a soft spray is good .

Originally posted by prashanth.rva View Post

.. ‘Multimeter’ - I bought it in college days. Once some one put the probes in AC by wrongly connected to multimeter socket. I will have to get it checked by some one weather it is good to use. The probes are burnt. ..

If you intend to use the multimeter on AC powerline or any AC/DC voltage exceeding 50 volts , never use these cheap multimeters - believe me because I have used all kinds .

This is my minimum small meter for safety and it should last me my lifetime with good accuracy too .

Originally posted by prashanth.rva View Post

.. The last one: Red Screwdriver like looking - is the tool used to remove a small screw/thread inside the tubes air valve..

Yes , it's called a valve-pin tool I think . Need to get one !

Originally posted by prashanth.rva View Post

I have used Waxpol after wash. Its really good. Bike looks very shiny..

The waxpol liquid I use is this red one ( on the left ) , but your's is good enough .

Originally posted by prashanth.rva View Post

.. Few friends told Rubbing compound also very shiny. Once I simply I applied on tank and hand buffed it. I didn't feel any difference.

Never use rubbing-compound on bike paint again , it shall remove paint and clear coat . It is a abrasive paste intended for professional use by automobile painters , not for us .

**dude_creative** · 02-07-2016, 09:43 AM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by Brezon95 View Post

I could not get my bike serviced at the svc due to lack of time so today I bought this spark plug.
Please tell if its original and would it be okay for the bike as I have not installed it yet.

Recommended is UR4AC but on spark plug its written just U 4A.

I live in a small city so getting this kind of original stuff is pretty tough.

I also wanted to buy Veedol Take off 4t 10w30 but sadly couldnt find it.

That U4A is perfect, it is same as UR4AC without resistor.
Install this new one and see how the plug looks after riding. Remember 1.25 turns open ur air screw from closed position.

**Brezon95** · 02-07-2016, 09:56 AM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by dude_creative View Post

That U4A is perfect, it is same as UR4AC without resistor.
Install this new one and see how the plug looks after riding. Remember 1.25 turns open ur air screw from closed position.

So non resistor type would not harm the bike? Sorry I am just a bit curious.

**dude_creative** · 02-07-2016, 10:56 AM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by Brezon95 View Post

So non resistor type would not harm the bike? Sorry I am just a bit curious.

Resistor plugs are to reduce interference, only useful if u keep radio in your bike.
Nothing to worry, in fact better.

So non-resistor spark plugs are better for performance?

Answer:
Yes. If you are looking for performance you want to use non-resistor spark plugs. A resistor is exactly what the word implies. When the spark crosses the point of resistance some of the spark energy is lost. A resistor is like an electronic obstacle and could be the cause for a weak spark. Non-resistor spark plugs deliver a more powerful spark.

**Brezon95** · 02-07-2016, 11:00 AM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Thank you sir I am going to install it.

**rv555** · 02-07-2016, 11:19 AM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by Pinaki View Post

This is my minimum small meter for safety and it should last me my lifetime with good accuracy too .

Pinakiji ,how much you paid for fluke multimeter?made in usa?

**Pinaki** · 02-07-2016, 12:23 PM

off topic

Originally posted by rv555 View Post

Pinakiji ,how much you paid for fluke multimeter?made in usa?

Fluke 101 Digital Multimeter: Amazon.in: Home & Kitchen

**Brezon95** · 02-07-2016, 02:13 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

So installed the new plug, ran 2 kms on it as of now. Will check the condition after 50 kms.

**Brezon95** · 02-07-2016, 03:19 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Its hard to find Veedol Take Off 4t Premium here. Yesterday when I bought the plug I asked for it in about 5-6 shops. None had veedol. All had castrol, hp, and fake copies of Hero 4T Orange can with companies names like "Milestone". Even that no 10w30 grade.

Shopkeepers were telling me milestone is the best oil. Lol. They just want to loot us. Some were telling "passion me 20-40 or 20-50 hi dalta hai. Aap castrol dalwa lo best hai".

I still have not searched it in another market which is the biggest in the city.

**dude_creative** · 02-07-2016, 05:38 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by Brezon95 View Post

Its hard to find Veedol Take Off 4t Premium here. Yesterday when I bought the plug I asked for it in about 5-6 shops. None had veedol. All had castrol, hp, and fake copies of Hero 4T Orange can with companies names like "Milestone". Even that no 10w30 grade.

Shopkeepers were telling me milestone is the best oil. Lol. They just want to loot us. Some were telling "passion me 20-40 or 20-50 hi dalta hai. Aap castrol dalwa lo best hai".

I still have not searched it in another market which is the biggest in the city.

dude i dont know which city , even u may use Honda 10w30 oil if it is there.

veedol site right side corner has where to buy. check this.

Two Wheeler Oils :: VEEDOL TAKE-OFF 4T PREMIUM

**Brezon95** · 02-07-2016, 05:47 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

I already tried that in veedol's site. It seems like very less shops have 10w30. I live in Aligarh, UP.

**prashanth.rva** · 02-08-2016, 02:59 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

[MENTION=68316]dude_creative[/MENTION] & Pinaki:

Thanks a lot for the pick & info on WD40. Now I got an idea.
A good info i learnt on Gasket Maker/Anabond Gasket.

Originally posted by Pinaki View Post

I have made it a habit to lubricate every nut , bolt or screw fastener with light film of grease or oil whenever I open them , so I never got any stuck bolts etc on the bike .

Its a very good habit Pinaki ji. I will also acquire this going forward.

Originally posted by Pinaki

The waxpol liquid I use is this red one ( on the left ) , but your's is good enough .

Whats the difference between the black one (mine) and the Red one?. Because mine is almost over. I can go for Red one for the next time.

**dumb0** · 02-08-2016, 03:21 PM

Re: Hero Moto Splendor/Joy/CD-Dawn/Passion

Originally posted by Brezon95 View Post

So non resistor type would not harm the bike? Sorry I am just a bit curious.

Not at all man.
its a bit better w.r.t. performance of the bike.
I myself have been using it for last two and a half years.
Happy Biking

Announcement

Hero Moto Splendor/Joy/CD-Dawn/Passion

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment