Announcement
Collapse
No announcement yet.
Hero Honda Karizma ZMR
Collapse
X
-
Got a $5 head? Get a $5 helmet.
Because everyone who passes, isn't a martyr!
Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0
-
Hero Honda Karizma ZMR
Bro, I performed the bleeding process last week with kmk bro's help. As for the brake pads, I got them inspected at ASC during last service and they said they were fine. Bike gas run 13K so far. Brakes are definitely tighter as there was a lot of dust in the fluid earlier to the bleeding process. My only concern now is the freeplay.Originally posted by ashwinprakas View PostRegarding spongy feedback;
1. Inspect brake cable.
2. Inspect break pad wear(Change if necessary).
3. Change brake fluid.
*Brake fluid looses its integrity when exposed.
*The best way to get air out;
Press the lever a couple of times and release, loosen the bleed nut and gently press the lever and when you're at the end close the bleed nut, repeat till the air is out and brake fluid starts to come out. Say I'm half way through the lever and the fluid starts flowing, I immediately close the bleed nut without releasing the lever.
*If you release the lever with the bleed nut open, air will enter the system.
*Dont wait till shit breaks loose, keep a predetermined service interval based on your usage and overhaul the system (Mine was, replace pads and fluid every 10k kms).
Too sleepy to type in proper sentences, but I've tried to note down all the key points, hope its enough.
I am planning to remove the muffler shield as it has too many scratches now. I don't carry pillions anyways. Do you think its a bad idea to ride without that shield?
Sent from my iPhone using TapatalkLast edited by sarkartheruler; 11-17-2014, 12:58 PM.
Comment
-
Re: Hero Honda Karizma ZMR
I got it changed last month, will check the bill and update the latest value.Originally posted by rreneav1987 View PostIt costs somewhere around 1500/- i dont remember the exact cost.. but it is not more than 1600..
Edit - It cost me 1170 last year.. it might cost an additional 100 at max..
[ATTACH=CONFIG]163722[/ATTACH]
Sent from my Lumia 820 using Tapatalk
Comment
-
Re: Hero Honda Karizma ZMR
He is back to India and he is more evil than beforeOriginally posted by Divya Sharan View PostIsn't he out of India now?

He is a Devil in disguise
Splendor - 2k to 2006
Karizma - 2k3 to 2009
P180 - 2k6 to 2k9
Hunk - Oct 2k7 til now
ZMR - 2010 to Forever
RX135(2k) - 2013 to 2018
Ninja 250R (2010) - 2016 til now
RayZ - 2015 til now
Ninja 650 (2014) - 2017 til now
Delhi to Narkanda
Delhi to Coimbatore
Delhi to Nepal
Comment
-
Re: Hero Honda Karizma ZMR
Though I didn't find it on the back of the bottle/container, rubbibg compounds usually do contain mild amounts of abrasives. Hence, people are suggested to swirl the mop in just one direction/circular motion.Originally posted by kmk0311 View Post@Divya Sharan, does the rubbing compound contain abrasives?Got a $5 head? Get a $5 helmet.
Because everyone who passes, isn't a martyr!
Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0
Comment
-
Re: Hero Honda Karizma ZMR
This one for sure contains abrasives, if it's tested on a different surface. My friend, for example was using it on his avenger and instead of following the circular motion, kept on rubbing it roughly, the coarse particles were clearly visible and obviously he did not get the desired output. One has to be careful while using one of these because improper use can actually harm your paint job.
Comment
-
Got a $5 head? Get a $5 helmet.
Because everyone who passes, isn't a martyr!
Bullet Service Guide CBR 250R Parts Manual Fz16 service manual - https://drive.google.com/file/d/0B1-...VFQmJzakk/view
Hero Moto Corp Bikes' Parts RE STD 350 Wiring Diagram (CI) Service Manual - Classic 350/500
ZMR parts - https://drive.google.com/file/d/0B-U...it?usp=sharing
P200NS Spares' prices - https://docs.google.com/spreadsheet/...taGd5R2c#gid=0
Comment
-
Re: Hero Honda Karizma ZMR
The front right side indicator bulb conked on my bike last night. Will get it fixed after i come back from Chennai in December..Originally posted by Divya Sharan View PostLow beam conked out yesterday. Came back home blinding oncoming traffic and will continue doing so till Friday.
Sent from my phone. Kindly avoid it while riding.
The horn earth wire keeps getting cut off.. i have to look for a proper place to connwct the Earth wire.. :banghead: i have connected it temporarily...
I got my bike a chinese HID kit last day. Just to see how the 4300k HID helps in Fog. I will go for the branded HID based on performance of 4300k HID during fog..
Low Beam
High Beam
I might have to move the reflectors up a little. Pics clicked in my basement and then outside my gym
Sent from my Lumia 820 using TapatalkSplendor - 2k to 2006
Karizma - 2k3 to 2009
P180 - 2k6 to 2k9
Hunk - Oct 2k7 til now
ZMR - 2010 to Forever
RX135(2k) - 2013 to 2018
Ninja 250R (2010) - 2016 til now
RayZ - 2015 til now
Ninja 650 (2014) - 2017 til now
Delhi to Narkanda
Delhi to Coimbatore
Delhi to Nepal
Comment
-
Re: Hero Honda Karizma ZMR
They are the same. except the colour has changedOriginally posted by sarkartheruler View PostEarlier ZMR came with black silencer cover; now with gold. Can someone confirm if both fit the silencer the same way?
everything between the Hero Honda ZMR and Hero ZMR V1 are the same
Splendor - 2k to 2006
Karizma - 2k3 to 2009
P180 - 2k6 to 2k9
Hunk - Oct 2k7 til now
ZMR - 2010 to Forever
RX135(2k) - 2013 to 2018
Ninja 250R (2010) - 2016 til now
RayZ - 2015 til now
Ninja 650 (2014) - 2017 til now
Delhi to Narkanda
Delhi to Coimbatore
Delhi to Nepal
Comment
-
Re: Hero Honda Karizma ZMR
I'm sure [MENTION=41586]Divya Sharan[/MENTION] would've said the exact same thing 😝Originally posted by Dr.Hemant Gajendra View Post[ATTACH=CONFIG]163951[/ATTACH]
I know this should not be posted here still i wanted this to show you all
Isnt it really true for us
Comment
-
Re: Hero Honda Karizma ZMR
Originally posted by rreneav1987 View PostThe front right side indicator bulb conked on my bike last night. Will get it fixed after i come back from Chennai in December..
The horn earth wire keeps getting cut off.. i have to look for a proper place to connwct the Earth wire.. :banghead: i have connected it temporarily...
I got my bike a chinese HID kit last day. Just to see how the 4300k HID helps in Fog. I will go for the branded HID based on performance of 4300k HID during fog..
[ATTACH=CONFIG]163959[/ATTACH]
[ATTACH=CONFIG]163960[/ATTACH]
Low Beam
[ATTACH=CONFIG]163961[/ATTACH]
High Beam
[ATTACH=CONFIG]163962[/ATTACH]
I might have to move the reflectors up a little. Pics clicked in my basement and then outside my gym
Sent from my Lumia 820 using Tapatalk
Bro what's the price of the HID ??
Sent from my XT1022RIDE SANE , RIDE SAFE...
Comment



Comment