Re: CBZ xtreme / Hunk

Hello Guys, back after a Long time to XBhp Again...

Completed 1.5 years with my bike and it is running butter smooth.

Some of the things i would like all of you to take care of.. sharing the good that i have learnt in this one year.

Always maintain your speed and RPM in the first 3 service. the bike is in a good bonding with you for a long run.

Whenever taking the bike from the service center check each and every minute detail of the bike.. had a issue where in the rear view mirrors of my bike and the crash guard was being replaced with another hunk which came for servicing. Thanks to my habit of checking everything before leaving the service centre. and never ever let the service center guys wash and polish ur bike.

They keep the pressure on a higher side and in the motor they have which eventually lets them save water and the result.. The pressure makes the paint and other things to go off. and the polish they use stays only for few hours.. no use of it.. better give to the local washing guy they do the job really well.


Find a good mechanic for your bike after your free service is done. and always stick to him for all the issues faced.

Always keep yourself updated about how basic things are done. like chain greasing adjusting the chain stiffness.. and engine oil change. etc it really helps you a lot.

before you start your bike always do a four way check of the bike.

Always Kick start the bike in the morning with choke on. and keep it on for 30 second and off you go.

And remember. ATGATT...

Hope this helps for safe and Quality Riding.

Cheers!

Re: CBZ xtreme / Hunk

Bro, then there is no way for fitting 42T on rear.?

Re: CBZ xtreme / Hunk

Unicorn rear sprocket is 42T. Someone was using it in this thread, forgot his name.

Re: CBZ xtreme / Hunk

CB unicorn have 43T rear. Unicorn pre 2010 models had 42T

RULE The Road, But First Wear The CROWN

Re: CBZ xtreme / Hunk

thanks guys. so i think its bit difficult to get. anyway will go and search for it.

Re: CBZ xtreme / Hunk

Hey guys, any hints to fit Pulsar bar end weights to Hunk ? If someone has done it, pls share your experience.

Re: CBZ xtreme / Hunk

Yes you can fit pulsar end weights with some modifications on stock handle. Need to weld a 10mm nut inside on each side of handle bar to tighten the end weights. And you are done

RULE The Road, But First Wear The CROWN

Re: CBZ xtreme / Hunk

why do you want to fit pulsar end weight ? an reason ?

Re: CBZ xtreme / Hunk

ZMR weights look better, [MENTION=65796]PRATHM[/MENTION] has fitted those on his xtreme, looks good too.

Re: CBZ xtreme / Hunk

ZMR`s bar end weights are heavy, looks cool & also helps a lot in vibration reduction of handle, they also prevent damage if bike falls as that is why they are long in ZMR( Beign full faired bike). As extreme have split handle bar with bar end weights, it already had screwed hole. Also I already had bar end weights but they were quite small so decided to swap them with ZMR`s. In case of hunk, it has plastic weights, so u need to do some jugad to fit them. I had seen in XBHP itself who had fitted pulsar bar end weight on his extreme though it was pre 2011 model without split handle bar wala.

Re: Air leaking in tubeless tyres between alloy and tyre..!!



----consecutive posts auto-merged-----



Thanks for the reply guys..the supervisor at svc sealed behind the 2nd service slip and told me i wont loose the warranty if i do the remaining free services and paid services on time.

----consecutive posts auto-merged-----

2182kms on odo.started using my Hunk from 1270kms.
3 services (missed the 2nd one) and 4th service is on August.
Riding between 40-50km/hr.till yesterday 81kms for 100rs petrol(74rs/L) was the best i got and today its 89kms not out for 100rs petrol(75rs/L) ..!!

IS THIS NORMAL??!

Re: CBZ xtreme / Hunk

You are getting awesome millage.. hope I would get the same.. never got more than 46-47

Sent from my AO5510 using Tapatalk

Re: Air leaking in tubeless tyres between alloy and tyre..!!

More than 60kms/L for Hunk!
Which method you're calculating mileage?

I haven't managed to get more than 65kmpl on my Splendor and 47kmpl with Hunk!

Re: Air leaking in tubeless tyres between alloy and tyre..!!

On Reserve to reserve basis.
When the price of petrol was 78rs/L my passion pro used to do 87kms for 100rs petrol.Now i get 94-97kms for 100rs petrol.

Re: Air leaking in tubeless tyres between alloy and tyre..!!

Great!
Then you've got a fine tuned riding style I think
All the best with your Hunk.