Announcement
Collapse
No announcement yet.
Yamaha FZ-16/ FZ-S
Collapse
X
-
search the thread.....Originally posted by vinchel View PostWhat would be the cost for applying teflon coating for my yamaha fz 16 bike ? Will it be free from minor scratches ( from dress, bag etc..). Are there any other polish or coating available which would give it a showroom like appearance. What would be exact cost.
Another thing, I have completed the first service at 570km. The mileage before service was 52kmpl ( riding speed at 45-50kmphr). The lowest was 44kmpl. Expect it to improve after first
Comment
-
It was not a problem with your self-starter. Your vehicle tilted over&the petrol overflowed.Originally posted by shahkartik24 View PostThanks for the reply but y do you think was the self starter not working....
and can u please explain from where did the petrol overflowed and what should i do in such conditions???
Wouldn't happen on a daily basis, but I advise while parking keep the petrol tap off when the tank is full&also parking in mainstand till the fuel quantity goes down a bit.
Bending to the side will cause petrol to overflow. Use sidestand for short duration&main for longer durations/uneven surfaces.Quench my thirst with gasoline!
Comment
-
Originally posted by Sarvajit View PostIt was not a problem with your self-starter. Your vehicle tilted over&the petrol overflowed.
Wouldn't happen on a daily basis, but I advise while parking keep the petrol tap off when the tank is full&also parking in mainstand till the fuel quantity goes down a bit.
Bending to the side will cause petrol to overflow. Use sidestand for short duration&main for longer durations/uneven surfaces.
Thanks a lot
Comment
-
Originally posted by Alex Ninan View PostIt can still pull further... I have reached up to a 115 .. but only on straights/ slopes .. not on even the slightest uphill .. :-) . . .
well, i have gone upto 118 on straight road.......on mumbai - pune highway....
i had to pull down because of bad road ahead....or else it may have gone up to 120 maybe
but it takes a lot of time to reach this figure and requires me to sit crouched in a aerodynamic posture.....
my friend who was on rtr160 easily zoomed past me although he said he doesnt feel much confident on rtr at high speeds
Comment
-
nice that you went till 118 in Fazer it will be like dream figure. I have not succeeding in breaching 110 mark up till now. But one thing is sure..at high speed also the bike is rock solid without any chillam chilli I mean vibrations and all..Originally posted by shahkartik24 View Postwell, i have gone upto 118 on straight road.......on mumbai - pune highway....
i had to pull down because of bad road ahead....or else it may have gone up to 120 maybe
but it takes a lot of time to reach this figure and requires me to sit crouched in a aerodynamic posture.....
my friend who was on rtr160 easily zoomed past me although he said he doesnt feel much confident on rtr at high speedsMy Blog : http://itsrahul.wordpress.com
Comment
-
kool man...how do you keep it below 55...i cant seem to ...52kmpl is awesome..i just wanted to ask how much is the reserve for the bike??Originally posted by vinchel View PostWhat would be the cost for applying teflon coating for my yamaha fz 16 bike ? Will it be free from minor scratches ( from dress, bag etc..). Are there any other polish or coating available which would give it a showroom like appearance. What would be exact cost.
Another thing, I have completed the first service at 570km. The mileage before service was 52kmpl ( riding speed at 45-50kmphr). The lowest was 44kmpl. Expect it to improve after firstsigpicGirls are like roads, more the curves, more the dangerous they are.
To ride or not to ride?? is a....
very very stupid question....
Comment
-
Originally posted by vinchel View PostWhat would be the cost for applying teflon coating for my yamaha fz 16 bike ? Will it be free from minor scratches ( from dress, bag etc..). Are there any other polish or coating available which would give it a showroom like appearance. What would be exact cost.
Another thing, I have completed the first service at 570km. The mileage before service was 52kmpl ( riding speed at 45-50kmphr). The lowest was 44kmpl. Expect it to improve after first
For Teflon coating..when I went for my first serivce..the guy asked me this question
:"APne teflon to nahi karwaya na? us se kuch fayda nahi hota"
I was surprised..he said that its better to keep your bike clean and keep it polished every 15 days or so. Waise teflon dosen't makes your bike scratch proof. Although I am already done with teflon..but it was much before the advice..but now..whenever I get my bike washed I use WAXPOL for the polish purpose and the bike is shining jhama jham
anyways...hope it helps..
My Blog : http://itsrahul.wordpress.com
Comment
-
Guys there is sudden drop in mileage of my Fazer..I guess it hangering between 35-40 km/l..dunno what to do..
My Blog : http://itsrahul.wordpress.com
Comment
-
thts what pretty much everyone gets on the FZ seriesOriginally posted by RahulSingh View PostGuys there is sudden drop in mileage of my Fazer..I guess it hangering between 35-40 km/l..dunno what to do..
Smoke rubber,not tobacco.
-Life Through-the-Lens
-For HELLA/VALEO [BMW/AUDI/FORD/LINCOLN/SKODA],P220,Aftermarket Projectors,pls contact me!
Comment
-
If you have the small visor accessory on your bike, put it on that, else on the back mudguard!Originally posted by sudhakargurram View PostGuys any one had Xbhp stickers on their bikes?
If yes where did you pasted?
I thought of getting a sticker but wondering where to put that
Quench my thirst with gasoline!
Comment



Comment