Since '02 xBhp is different things to different people. From a close knit national community of
bikers to India's only motorcycling lifestyle magazine and a place to make like-minded biker
friends. Join us
If this is your first visit, be sure to
check out the FAQ by clicking the
link above. You may have to register
before you can post: click the register link above to proceed. To start viewing messages,
select the forum that you want to visit from the selection below.
now , if you take it to SVC they will tune it to max power !!! those guys know only these two settings ... If your not happy with the mileage , then take it over .
no I am happy with my power to speed ratio because randomly I need to go 90+.now very happy after using for 1 &1/2 year
sigpicBOND BETWEEN 2 LEGS & 2 WHEELS.....CAN SURPASS ANY BOUNDARY....
ya when I bought Fz16 in 2009 nov,it cost me rs.67750 on road including everything that comes as standard.
you are lucky dude , I paid 75100Rs on road . about a year and a half ago ...
P.S: Guys , getting a really annoying sound from my engine . Like some bolt has gone loose inside and is rattling in there . I'm thinking its the tappets , but can anybody tell me how to identify tappet noise ???
People ask me , why are you cribbing about the BHP ? to them I say "MORE is never ENOUGH" xbhp.com
FZ16 headlight assembly with projector and angel eye for sale .
How to switch on both twin headlights in Fazer ? Its separately illuminated as High(Right) and Low Beam(LefT) , I wanted to make both to be working at sametime.
I guess it is wat the stock yamaha fazer is or some problem ?
How to switch on both twin headlights in Fazer ? Its separately illuminated as High(Right) and Low Beam(LefT) , I wanted to make both to be working at sametime.
I guess it is wat the stock yamaha fazer is or some problem ?
Thanks
you can switch on both,for that you have to buy either 1low beam light or high beam light & replace with the factory 1.take it to local mechanic,he can fiddle with the electrics & voila your both headlight will be on.please dont use your current set up both on as it will drain the battery very fast.use either both high or low beam headlights to save the battery.
sigpicBOND BETWEEN 2 LEGS & 2 WHEELS.....CAN SURPASS ANY BOUNDARY....
how much can we lean on the bike ? Yesterday i was at an empty T junction and was at around 50kmph and decided to try out some super leaning. my shoe was sticking out of the footrest (sideways) a little, maybe by a cm or so and during leaning, it rubbed on the floor. Fortunately, i didn't lose balance. What i'm wondering is that i haven't leaned much. If i had leaned a bit more, wouldn't the footrest be hitting the floor ?
how much can we lean on the bike ? Yesterday i was at an empty T junction and was at around 50kmph and decided to try out some super leaning. my shoe was sticking out of the footrest (sideways) a little, maybe by a cm or so and during leaning, it rubbed on the floor. Fortunately, i didn't lose balance. What i'm wondering is that i haven't leaned much. If i had leaned a bit more, wouldn't the footrest be hitting the floor ?
in fz you can scrape the footpeg with some practice... just remember not to
keep your foot below the geat shift while going for a left turn lean.....
Timon: Orange Yamaha FZ16 2009
Optimus: Red Mahindra XUV500 W8 FWD 2013
Atom: Red Tata Nano XTA 2016
Pumba: Red Harley Street 750
okay. so would the footbreak break or wear out if done for quite a few times ? also does it disturb the balance ?
it will not break,only the points will get scraped off.And it will not disturb the balance,it will just give feedback to u about the lean angle & when to stop any more leaning..
sigpicBOND BETWEEN 2 LEGS & 2 WHEELS.....CAN SURPASS ANY BOUNDARY....
the bike is butter smooth till 4k rpm but as soon as i cross the 4k line there is
a burst of vibrations which remain till about 5k and after that the bike is again
smooth...
just for info i have covered around 11k km on the bike and currently using
castrol activ 4t semi synth from the past 1000km....
anybody know anything about this?? does my bike need any kind of replacement??
Timon: Orange Yamaha FZ16 2009
Optimus: Red Mahindra XUV500 W8 FWD 2013
Atom: Red Tata Nano XTA 2016
Pumba: Red Harley Street 750
the bike is butter smooth till 4k rpm but as soon as i cross the 4k line there is
a burst of vibrations which remain till about 5k and after that the bike is again
smooth...
just for info i have covered around 11k km on the bike and currently using
castrol activ 4t semi synth from the past 1000km....
anybody know anything about this?? does my bike need any kind of replacement??
dont know about others but mine also vibrates in the same 4000-5000 & then smooth again.told the svc everytime during service but of no help.The problem still persists.May be some engine mount loose screw..may be..just my percepcion
sigpicBOND BETWEEN 2 LEGS & 2 WHEELS.....CAN SURPASS ANY BOUNDARY....
Comment