Announcement

**prateek2210** · 03-22-2017, 03:40 PM

Re: Honda CBR 250R

Never knew it would be so difficult for people to check a simple thing on bike.

Keep the bike near a wall, close enough that the bar end touches the wall, get down from other side and check the oild/ coolant level or do whatever with the bike. It wont fall on the side of the wall, and other side even if it tips off, you are already there to hold it.

**IamAditya** · 03-22-2017, 08:03 PM

Re: Honda CBR 250R

What is the abs model name used in Cbr250?

**B7ACKTHORN** · 03-22-2017, 08:17 PM

Re: Honda CBR 250R

Originally posted by IamAditya View Post

What is the abs model name used in Cbr250?

CBR250RA for CBR with ABS
CBR250R for CBR without ABS

Cheers!
VJ

**IamAditya** · 03-22-2017, 08:47 PM

Re: Honda CBR 250R

Originally posted by B7ACKTHORN View Post

CBR250RA for CBR with ABS
CBR250R for CBR without ABS

Cheers!
VJ

[emoji51] I meant the abs used in Cbr250?
Model name of that .

**ALI.R** · 03-22-2017, 09:44 PM

Re: Honda CBR 250R

Originally posted by B7ACKTHORN View Post

CBR250RA for CBR with ABS
CBR250R for CBR without ABS

Cheers!
VJ

Seems like he asked for the make of the ABS module used on the CBR. I guess 😕

**M_Trigger** · 03-22-2017, 10:21 PM

Re: Honda CBR 250R

Originally posted by pushu097 View Post

I am searching for a good SVC in Pune who has a trained technician for Cbr. Please suggest.

You can try Yash Honda at Hadapsar. I usually get my bikes serviced there.

**pushu097** · 03-22-2017, 10:27 PM

Re: Honda CBR 250R

Originally posted by pushu097 View Post

Will get a new bottle of coolant from the svc since it is less than a km from my place and fill it up and then ride the bike. I hope the thermostat is intact. Lets see. Will update tommorow.

Again, thanks a lot guys.[emoji4]

Bought a new bottle of coolant.
Opened up the radiator cap and poured the coolant in it. The bike took around half the bottle i.e around 450-500 ml. This makes sure that the svc did not replace the coolant.
Went for a short 10km ride and the bike performed well. The temp gauge did not cross 3 bars. This shows that the thermostat is intact.

Once again...thanks a lot people[emoji4]

**mathewkakkassery** · 03-22-2017, 10:44 PM

Re: Honda CBR 250R

Originally posted by IamAditya View Post

What is the abs model name used in Cbr250?

I think CBR comes with Nissin ABS & Nission brakes

OT : BTW , I found this online. Maybe will be helpful to the owners

2011 CBR250RA AC Honda Motorcycle Parts

Thanks
Mathew K Jose

**s1d** · 03-23-2017, 12:06 AM

Re: Honda CBR 250R

Originally posted by pushu097 View Post

Opened up the radiator cap and poured the coolant in it. The bike took around half the bottle i.e around 450-500 ml. This makes sure that the svc did not replace the coolant.
Went for a short 10km ride and the bike performed well. The temp gauge did not cross 3 bars. This shows that the thermostat is intact.

now, again open the radiator and check. top up if necessary and ensure you fill up the expansion tank also

**arvstreetracer** · 03-23-2017, 12:09 AM

Re: Honda CBR 250R

Originally posted by pushu097 View Post

Bought a new bottle of coolant.[ATTACH]228143[/ATTACH][ATTACH]228144[/ATTACH]
Opened up the radiator cap and poured the coolant in it. The bike took around half the bottle i.e around 450-500 ml. This makes sure that the svc did not replace the coolant.
Went for a short 10km ride and the bike performed well. The temp gauge did not cross 3 bars. This shows that the thermostat is intact.

Once again...thanks a lot people[emoji4]

You may check it once again. Once you open the cap and coolant level is up to brim, it won't need more. If not so, pour more and start the bike. Rev it little and it would settle down. If still level goes down, pour it...rev it, pour it till coolant level becomes stagnant!

**B7ACKTHORN** · 03-23-2017, 12:32 AM

Re: Honda CBR 250R

Originally posted by IamAditya View Post

What is the abs model name used in Cbr250?

Well, in that case, the entire braking system is provided by Nissin, right from the calipers to the return pump /HECU. If my memory serves me correct, yesteryear I clearly remember reading an article that mentioned the caliper pad material were patented by Nissin on some Thailand-ian translated news.

Cheers!
VJ

**IamAditya** · 03-23-2017, 12:46 AM

Re: Honda CBR 250R

So the abs is also by Nissin?
Unlike the Bosch provided systems on Bajaj and ktm

**B7ACKTHORN** · 03-23-2017, 01:01 AM

Re: Honda CBR 250R

Originally posted by IamAditya View Post

So the abs is also by Nissin?
Unlike the Bosch provided systems on Bajaj and ktm

Correct. NISSIN makes both ABS modules as well as Braking components, and the CBR250R has NISSIN supplied components, the entire gamut, pads, calipers, and ABS module/HECU. KTM and Bajaj use Bosch 9 MP ABS, while the 390 have dual channel, the rest of the clan have single channel, front brake.

Cheers!
VJ

**mathewkakkassery** · 03-23-2017, 01:31 AM

Re: Honda CBR 250R

Dominor also comes with dual ABS.But i don't know if it is Bosch. If it is bosch, it is really hard to believe that the difference between ABS & NON-ABS is 14,000 only. 2015 D390 ABS pump system(including the ecu/chip) costs 20K

Thanks
Mathew

Sent from mTalk

**IamAditya** · 03-23-2017, 01:42 AM

Re: Honda CBR 250R

Bosch abs 9mb has 3 versions.
The cheaper one may be used in D400.

Announcement

Honda CBR 250R

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment