Been a long time since i posted here!
Finally, at long last i was able to fit projector and hid to my tbts. Got these from RDMotovil, set me back by close to 8k. I first came across RDmotovil on xbhp only. Projector is an AES Q5. I have no prior experience with these, but the ballast which came with the kit was super small and 'seemed to be' of reasonably good quality. Beam throw has good reach and spread without noticeable hotspot. I think in terms of hotspot, it compares favourably to morimoto mini which i was considering (my knowledge is only from 'beam' pics of the morimoto!) Unfortunately, i had to settle for bulb temperature of 6000k and 35w ballast. On hitting the road, i found out that having a hotspot is better when faced against blinding high beams from oncoming traffic
Definitely an upgrade from my 60w bulb, but considering that the beam pattern is very focussed for the oem reflector i expected more from the HID. I'll try to exchange the ballast for a 35w one, that should probably do the trick.Projector would not fit in the space between oem reflector and the clear lens, so reflector was removed and projector was directly installed in the casquette. The wiring hidden between casquette and reflector was unceremoniously dumped outside headlamp assembly and now its hanging out there exposed to the elements behing the front number plate. I have already used up the space in the tank cover extensions (on which side reflectors are mounted) to hide the hid adapter and the ballast so now i am at a loss as to where to hide the tangled mass of wiring. Would really appreciate any suggestions from you guys!



And Yes I did it myself.

Comment