Announcement

**GuRpReEt SiNgH** · 05-11-2011, 11:30 PM

1) Fender eliminator
2) Green Handle bars (end part)
3) Gel based seat cover (its really soft and should give comfort to my backside on long rides)
4) New Tank Pad (some moron tried to remove the old one and could not do it completely so the end result is that he's gone with a part of it and as a result my bike has an incomplete/ partial tank pad now)
5) I dunno what you would call this one but it's a green coloured rubber thing that goes over the gear lever so that it does not spoil your formal shoes (i.e. if you wanna go for a short spin with them on). I actually did that and spoilt the leather on my shoe.

Parts in transit:-

6) Gear indicator
7) Integrated LED Tail light (clear lens) with turn signals

ALL I NEED NOW IS A DAY TO INSTALL ALL THE STUFF; will post pics once done!
Wish me luck!

**burninrubbr** · 05-11-2011, 11:51 PM

^^ That's one BiG list ! And a good one too ! Upload the pic asap, can't wait to see them

**nitro66** · 05-11-2011, 11:58 PM

Originally posted by GuRpReEt SiNgH View Post

1) Fender eliminator
2) Green Handle bars (end part)
3) Gel based seat cover (its really soft and should give comfort to my backside on long rides)
4) New Tank Pad (some moron tried to remove the old one and could not do it completely so the end result is that he's gone with a part of it and as a result my bike has an incomplete/ partial tank pad now)
5) I dunno what you would call this one but it's a green coloured rubber thing that goes over the gear lever so that it does not spoil your formal shoes (i.e. if you wanna go for a short spin with them on). I actually did that and spoilt the leather on my shoe.

Parts in transit:-

6) Gear indicator
7) Integrated LED Tail light (clear lens) with turn signals

ALL I NEED NOW IS A DAY TO INSTALL ALL THE STUFF; will post pics once done!
Wish me luck!

that's the hell lot of stuff,

. best of luck.and I am waiting.

**nitro66** · 05-12-2011, 12:02 AM

Originally posted by kariznin

Yesterday, got my Nuvo helmet. Fit and finish is awesome.
Some images with my new ride gear.

Nice lid buddy.This is one of the best jacket for summers. I have the same.

**nrinside** · 05-12-2011, 09:21 AM

Originally posted by Mzee_Maverik View Post

after reading this thread for two hours i concluded two things;
1: that for owning and running a ninja u must be in job of atleast 70k per month

.
2: my ZMR's spares are too cheeeeep.

Hey Mzee ,

Even i'm not a 70k guy ! Around a quarter of that

! Lots of sacrifices need to be made sometimes for certain things . I'm willing to make those for my ninja

! Its worth it !

**kariznin** · 05-12-2011, 11:06 AM

Originally posted by nitro66 View Post

Nice lid buddy.This is one of the best jacket for summers. I have the same.

Thanks Nitro66

You too got a really nice back pack. Got that from Mahalaxmi stores? And what about rim tapes? Didn't you get that done when you came to Delhi?

**nitro66** · 05-12-2011, 01:42 PM

Originally posted by kariznin View Post

Thanks Nitro66

You too got a really nice back pack. Got that from Mahalaxmi stores? And what about rim tapes? Didn't you get that done when you came to Delhi?

Thanks. Yaa thats from Mahalaxmi(just say I am from xbhp and some one recommended then he gave u discount

). United didnt have reflective rim tape. and I am looking for reflective material. so still searching......

**kariznin** · 05-12-2011, 02:33 PM

Originally posted by nitro66 View Post

Thanks. Yaa thats from Mahalaxmi(just say I am from xbhp and some one recommended then he gave u discount

). United didnt have reflective rim tape. and I am looking for reflective material. so still searching......

I too searched for the same reflective green color to match with the bike color but didn't found one.
Reflective ones are available but in slightly different green color.

**n_aditya** · 05-12-2011, 02:37 PM

Originally posted by nitro66 View Post

United didnt have reflective rim tape. and I am looking for reflective material. so still searching......

Originally posted by kariznin View Post

I too searched for the same reflective green color to match with the bike color but didn't found one. Reflective ones are available but in slightly different green color.

Check this out - Keiti Reflective Wheel Stripe - 900.00Rs

Seen it on a friends bike and it matches the ninja green color. Its not reflective. Its fluorescent but looks fab on the wheels. I'm thinking of getting one for my bike sometime.

**kariznin** · 05-12-2011, 04:10 PM

Originally posted by n_aditya View Post

Check this out - Keiti Reflective Wheel Stripe - 900.00Rs

Seen it on a friends bike and it matches the ninja green color. Its not reflective. Its fluorescent but looks fab on the wheels. I'm thinking of getting one for my bike sometime.

I have the same on my bike but it's not the Keiti, got it done from Karol Bagh, Delhi for amount very less than that.

Was looking for a reflective one earlier before getting this done, this one looks cool too. Have a look here, I posted some images few pages back
Here, is the link to that post - http://www.xbhp.com/talkies/625015-post5795.html

**GuRpReEt SiNgH** · 05-12-2011, 05:11 PM

Originally posted by kariznin View Post

I have the same on my bike but it's not the Keiti, got it done from Karol Bagh, Delhi for amount very less than that.

Was looking for a reflective one earlier before getting this done, this one looks cool too. Have a look here, I posted some images few pages back
Here, is the link to that post - http://www.xbhp.com/talkies/625015-post5795.html

Brother, can you please give some details regarding the shop from where you got these nasty looking wheel tapes and the cost for the same.

**kariznin** · 05-12-2011, 05:29 PM

Originally posted by GuRpReEt SiNgH View Post

Brother, can you please give some details regarding the shop from where you got these nasty looking wheel tapes and the cost for the same.

Got the strips work done from United Graphics, Karol Bagh (it is in the Khajanchi Lane) for just Rs. 280.

**Itzli** · 05-12-2011, 06:33 PM

If one actually digs deep into the spare parts, most of them are from India, if you dismantle your speedometer, it will be from pricol :-) . Proud to say India has quality automotive spares industry.

Only grouch is why should we import, what was once exported from here. Bajaj seems to be veering more towards the KTM and with a decreasing intrest toward the Kawasaki.

It has been almost a 2 years since the Ninja landed here, but thankfully the number of owners have remained small, hence we are getting some service (however expensive or pathetic it is).

Bajaj needs to really pull up its act.

**GuRpReEt SiNgH** · 05-12-2011, 08:17 PM

Originally posted by kariznin View Post

I have the same on my bike but it's not the Keiti, got it done from Karol Bagh, Delhi for amount very less than that.

Was looking for a reflective one earlier before getting this done, this one looks cool too. Have a look here, I posted some images few pages back
Here, is the link to that post - http://www.xbhp.com/talkies/625015-post5795.html

Originally posted by kariznin View Post

Got the strips work done from United Graphics, Karol Bagh (it is in the Khajanchi Lane) for just Rs. 280.

Thanks brother

**nitro66** · 05-12-2011, 08:25 PM

Tomorrow is going to be one of the biggest day of my life. If everthing goes fine then tomorrow morning I will be headed towards north above 10000 ft(sea level). Did some mods . put customized seat. here is the pic.
cost is INR-90.00

Announcement

Kawasaki Ninja 250R

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment

Comment